bmxrchewie
04-29-2016, 02:13 AM
92649
Let's make a deal this weekend! I'm new to posting pictures so bear with me please.
I'm gauging potential interests on my 1996 240sx Kouki conversion. I'm in the midst of building my home and this hobby drew the shorter straw. This isn't your average everyday 240. This is a Mazworkx built SR20. Complete motor and all tuning was performed by MAZWORKX in Florida. A highly respectable SR20 known shop (Feel free to look them up, nothing but quality and perfection). The body is 100% rust free, and could use a buff job. The front fenders have some cracks where they were rolled. Car rides rough being lowered with solid bushing and/or polyurethane. The interior is pretty good. Typical worn carpet and two spots (not cracked) on the dash are the only flaws that I have problems with (the pictures taken show A/C bezel and Shift bezel cracked/broken, that has been fixed, just haven't had time to update. Also has custom Radio Double Din Gauge pod installed). I have receipts to prove/verify this build including labor/spec receipts from Mazworkx themselves. For serious buyers, I can send a copy of my Google Drive to let you skim through the receipts I have on file. Also includes two sets of keys and original owner's manual Potentially an RB25det block, head, crank and other misc items can go with it.
SR20DET Blacktop
MAZWORKX built SR20 longblock (Includes Resize line bore, Resurface, check, polish, balance crank)
Garret GT2871R BB, 52 Trim with GT28R comp. .86R
APEXI Power FC Controller
Brian Crower Spring/Retainers
Tomei ProCams (260 intake/exhaust)
HKS Wastegate
Tomei Rocker Arm Stoppers
Mazworkx Head/Main studs
ACL Race Rod/Main bearing set (5 oil holes)
CP Carillo Forged Pistons (8.5:1)
Eagle Chromology Forged Rods
ACT Street/Strip Clutch
ACT StreetLite Flywheel
All AEPXI seals
ATI Pro harmonic balancer
FlexALite Dual 12" pullers
Reinhard full titanium exhaust with dual tips.
MAX Highmount Intercooler kit
Koyo Radiator
Chase Bays COMPLETE engine harness for S14 SR20DET
Suspension
Varrstoen ES1 18s with Dunlop Direzza tires
Stance Pro coilovers
TT 300ZX brake swap
SPL pro outer tie rods
Tein Inner tie rods (Z33)
SPL Pro solid Diff bushing
SPL Pro solid Sub bushings
I'm sure I'm missing tons of stuff above, not including misc parts and labor receipts; those are just the key points. Since my ownership, it's never been tracked, or drifted. It's had a good life since I've gotten her back on the road. This car is adult driven and has seen spirited driving rarely. I promptly drive it at least once a week and keep maintenance up to date. This car is FOR SALE ( I can not stress that enough ), not trade (Sadly banks don't take automobiles for payment on houses or I'd be set otherwise). Test drives and dyno sheets will be presented to serious inquiries only with Cash in hand. I'm asking $11,500 for everything (that includes RB25 parts). But I'm willing to negotiate for those serious inquiries with or without the extra parts. Thank you for your time and please don't hesitate to call/text/email if you need additional information and/or pictures. I also have video.
Located in Greenwood SC. Will travel within reason, but will have no way to deliver RB parts if so.
864-923-0154
James
Let's make a deal this weekend! I'm new to posting pictures so bear with me please.
I'm gauging potential interests on my 1996 240sx Kouki conversion. I'm in the midst of building my home and this hobby drew the shorter straw. This isn't your average everyday 240. This is a Mazworkx built SR20. Complete motor and all tuning was performed by MAZWORKX in Florida. A highly respectable SR20 known shop (Feel free to look them up, nothing but quality and perfection). The body is 100% rust free, and could use a buff job. The front fenders have some cracks where they were rolled. Car rides rough being lowered with solid bushing and/or polyurethane. The interior is pretty good. Typical worn carpet and two spots (not cracked) on the dash are the only flaws that I have problems with (the pictures taken show A/C bezel and Shift bezel cracked/broken, that has been fixed, just haven't had time to update. Also has custom Radio Double Din Gauge pod installed). I have receipts to prove/verify this build including labor/spec receipts from Mazworkx themselves. For serious buyers, I can send a copy of my Google Drive to let you skim through the receipts I have on file. Also includes two sets of keys and original owner's manual Potentially an RB25det block, head, crank and other misc items can go with it.
SR20DET Blacktop
MAZWORKX built SR20 longblock (Includes Resize line bore, Resurface, check, polish, balance crank)
Garret GT2871R BB, 52 Trim with GT28R comp. .86R
APEXI Power FC Controller
Brian Crower Spring/Retainers
Tomei ProCams (260 intake/exhaust)
HKS Wastegate
Tomei Rocker Arm Stoppers
Mazworkx Head/Main studs
ACL Race Rod/Main bearing set (5 oil holes)
CP Carillo Forged Pistons (8.5:1)
Eagle Chromology Forged Rods
ACT Street/Strip Clutch
ACT StreetLite Flywheel
All AEPXI seals
ATI Pro harmonic balancer
FlexALite Dual 12" pullers
Reinhard full titanium exhaust with dual tips.
MAX Highmount Intercooler kit
Koyo Radiator
Chase Bays COMPLETE engine harness for S14 SR20DET
Suspension
Varrstoen ES1 18s with Dunlop Direzza tires
Stance Pro coilovers
TT 300ZX brake swap
SPL pro outer tie rods
Tein Inner tie rods (Z33)
SPL Pro solid Diff bushing
SPL Pro solid Sub bushings
I'm sure I'm missing tons of stuff above, not including misc parts and labor receipts; those are just the key points. Since my ownership, it's never been tracked, or drifted. It's had a good life since I've gotten her back on the road. This car is adult driven and has seen spirited driving rarely. I promptly drive it at least once a week and keep maintenance up to date. This car is FOR SALE ( I can not stress that enough ), not trade (Sadly banks don't take automobiles for payment on houses or I'd be set otherwise). Test drives and dyno sheets will be presented to serious inquiries only with Cash in hand. I'm asking $11,500 for everything (that includes RB25 parts). But I'm willing to negotiate for those serious inquiries with or without the extra parts. Thank you for your time and please don't hesitate to call/text/email if you need additional information and/or pictures. I also have video.
Located in Greenwood SC. Will travel within reason, but will have no way to deliver RB parts if so.
864-923-0154
James