PDA

View Full Version : Head gasket for KA24e 90mm?

wrxsr20
03-13-2016, 07:41 PM
Hey guys I'm shopping for parts for my engine rebuild and I'm going with 89.5 Arais pistons so I'll have to bore my head nut here's the problem, I can't find any head gaskets that will compensate for a ka24e bored to 89.5. I found some for the ka24DE but to my understanding they don't fit on the single cam.
mewantkouki
03-13-2016, 08:04 PM
They fit, cut the timing cover area off and use RTV to seal the front covers.
wrxsr20
03-14-2016, 06:32 PM
They fit, cut the timing cover area off and use RTV to seal the front covers.



Are you 100% sure?
So if I got this http://www.autohance.com/cometic-c4285-051-mls-cylinder-head-gasket.html?gclid=CIaKz723wcsCFReUfgodRm8EEA It will work on my SOHC bored to 90mm?