PDA

View Full Version : sr20det trouble starting, FPR has dent


TripleF
03-09-2016, 06:50 PM
Trying to get redtop sr20det to fire up for the first time which has been sitting for years 5+. It is wired using the 3 relay system posted on the web.

fuel pump priming (triple checked lines are hooked up right)
CPU light is on KOEO, goes off when cranking
each cylinder has spark
cranks but does not fire (no backfire, nothing)
pulled plugs, no smell of gas
each injector has 12v to both wires, have not tested with noid light yet.
engine overall state is questionable, compression test show two dead cylinders, 2 and 4. :eek: Hoping it is just carbon build up.

After to trouble shooting for a while I noticed the FPR has dent. I pulled it and hit with air pressure, it held to over 40 psi (not sure if this is a good test).:confused:

If FPR is bad, does anyone sell a NISSAN OEM replacement without an adjustment screw.

Thanks,

Tim