Nissan R200 Differential VLSD 30-Spline

[KiLLeR2001]

Nissan R200 Viscous Differential VLSD. VLSD unit only! Will require 30-Spline VLSD output shafts. 13mm bolt holes on the differential. Bearing races are also included.

http://tehl33tsite.com/240sxdd/fs/diffs/q45/y33/IMAG3530.jpg

http://tehl33tsite.com/240sxdd/fs/diffs/q45/y33/IMAG3531.jpg

$100 shipped.

Shoot me a PM if you have any questions.

[sgt.yerface]

Would this fit my s13 sr20det coupe

[KiLLeR2001]

Will fit any R200 pumpkin. You will just need 30-spline VLSD output shafts.

[Ryanks14]

Will this work with J30 3x2 output shafts?

Is the diff in good shape? Was there any excessive play when it was installed? Did it lock fairly well?

[drumnbasslvr]

they mean does it require stubs of equal length or the ones that are different lengths, curious too because nice price

[KiLLeR2001]

Will this work with J30 3x2 output shafts?

Is the diff in good shape? Was there any excessive play when it was installed? Did it lock fairly well?

Differential is fine. Locks great. Nice and tight. However, most J30 differentials use 29-spline output shafts which will not work. I believe very late model '97 models used 30-spline output shafts but cannot confirm. JDM S14 kouki and S15's with VLSD will use 30-spline shafts.

they mean does it require stubs of equal length or the ones that are different lengths, curious too because nice price

VLSD output shafts have one long and one short shaft, not similar length like you would find with an open differential or S15 HLSD.

[KiLLeR2001]

Bump it up!!!

[KiLLeR2001]

Bump it up!!!

[KiLLeR2001]

Bump it up!!!

[KiLLeR2001]

Bump it up!!!

[KiLLeR2001]

Bump it up!

[KiLLeR2001]

Bump it up!!!

[KiLLeR2001]

Bump it up!!!

[KiLLeR2001]

Bump it up!!!

[KiLLeR2001]

Bump it up!

[KiLLeR2001]

Bump it up!!!

[KiLLeR2001]

Bump it up!