Advice for s13 coupe manual seat belt conversion

[erikforce1]

I'm aware the easiest conversion would be a full on cdm conversion, but it's hella expensive. I read the next best option will be to use the seat belts from a b14 sentra. For this swap, I know you need the b pillars. Am I able to use sentra a pillars as well? Any advice will be appreciated.

[ultimateirving]

It's much easier than you realize. Go to a junkyard and find a non wrecked b14. Pull out all the seatbelt parts, possible a receiver from another vehicle if the b14 are too short. I cut my stock pillars and used the plastic covers from the b14 pillars.

[erikforce1]

It's much easier than you realize. Go to a junkyard and find a non wrecked b14. Pull out all the seatbelt parts, possible a receiver from another vehicle if the b14 are too short. I cut my stock pillars and used the plastic covers from the b14 pillars.

what do you by cutting your pillars? what parts do I need exactly? does anyone a write with pictures to help?.I'm trying to figure all this out begore I go to the junkyard and I miss something.