New Performance Options brake booster delete adapter

[Matej]

This was purchased a couple of years ago and I ended up never using it.

I am asking 50$ shipped.

If you are interested or have any questions, please feel free to contact me.
Thank you for looking.


http://matejblahut.com/media/photo/buyselltrade/auto/brake/160228boosterdelete.jpg


Example of someone using the adapter in an AE86.
http://www.performanceoptions.net/images/86-booster-delete-600.jpg

[chiboy002]

hey matej do you know if itll mess up the braking quality? i know itll be harder, thats no problem, just dont want to increase braking distance cause itll be under-pressured or something

also, is it bolt up? s13 ka non-abs

[Matej]

hey matej do you know if itll mess up the braking quality? i know itll be harder, thats no problem, just dont want to increase braking distance cause itll be under-pressured or something

also, is it bolt up? s13 ka non-abs
Sorry, it was never actually fitted it or tested, so I cannot give any proper answers.
It will bolt right up to the firewall and brake master cylinder, but the brake pedal rod will probably need to be shortened, or a shorter one may be bought.

The brake pedal distance should remain the same.
Actually, without the brake booster there is no 'slop' or a 'dead spot' in the brake pedal movement, so it may actually even decrease pedal travel a bit.

I planned to drill the pivot point on the pedal higher if I found the effort too much. This method would increase the pedal travel. Of course it will also depend on what size master cylinder and brake combination is used. But it is possible to find a pretty good balance between pedal travel and brake effort.

At least this is definitely a safer solution than those scary Chase Bays kits. :)

[hooligans661]

Booster delete adapter sold to me!!=]