PDA

View Full Version : TX Intake-Turbo-Cams-Manifold-Power-VVl- Commander-Other Parts

outlawstar1023
02-15-2016, 04:04 PM
I am willing to ship at buyer expense.

I am open to price suggestions.

Any question that you have, I will try and answer them.

Call or text 917-636-9801.


1. Holset HX35W.
Comes with two exhaust housings ; BEP .63 AR Housing. And the Twin Scroll Housing, T3 flange.
I bought a brand new intake blade and a brand new exhaust blade and shaft for this turbo. It's been fully balanced and a brand new rebuild kit installed.
550
#/f/attachment.php?attachmentid=90944&stc=1&d=1455612334
#/f/attachment.php?attachmentid=90945&stc=1&d=1455612512
#/f/attachment.php?attachmentid=90946&stc=1&d=1455612539
#/f/attachment.php?attachmentid=90974&stc=1&d=1455613461


2. Custom build Ram Horn T3 Exhaust Manifold. Zero Leak. Zero Damage.
450
#/f/attachment.php?attachmentid=90947&stc=1&d=1455612644

3. SR20DET S13 Greedy Intake Manifold. It's the Real deal.
475
#/f/attachment.php?attachmentid=90948&stc=1&d=1455612678

4. Ogura 409 Series Single Disk clutch. Comes with the right bearing. all the clutch disk surfaces measured out to an average of 4.515mm. Brand new it's suppose to be 5mm thick. This clutch is pretty much brand new and has a lot of life left in it.
450
#/f/attachment.php?attachmentid=90949&stc=1&d=1455612723
#/f/attachment.php?attachmentid=90950&stc=1&d=1455612752
#/f/attachment.php?
attachmentid=90951&stc=1&d=1455612787

5. Fidanza light weight fly wheel for the SR20DET transmission.
250
#/f/attachment.php?attachmentid=90952&stc=1&d=1455612857


6. ACT 6 Puck clutch kit, sprung, with the heavy duty pressure plate. Used for less then 500 miles.
300
#/f/attachment.php?attachmentid=90953&stc=1&d=1455612882
#/f/attachment.php?attachmentid=90954&stc=1&d=1455612897
#/f/attachment.php?attachmentid=90955&stc=1&d=1455612923

7. Clutch fan.
25
#/f/attachment.php?attachmentid=90956&stc=1&d=1455612945

8. IACV, with metal screw.
50
#/f/attachment.php?attachmentid=90957&stc=1&d=1455612990

9. TB with TPS Sensor, i think it was 70mm.
75
#/f/attachment.php?attachmentid=90958&stc=1&d=1455613019

10. Crank Angel Sensor, working condition. I have Two of these. Once with an AEM crank disk.
10
#/f/attachment.php?attachmentid=90959&stc=1&d=1455613047
#/f/attachment.php?attachmentid=90960&stc=1&d=1455613060
#/f/attachment.php?attachmentid=90975&stc=1&d=1455613520


11. Front oil cover. Works perfect. Just needs to be sanded and repainted. Has a bran new front seal.
90
#/f/attachment.php?attachmentid=90961&stc=1&d=1455613088

12. Sr20det Starter. It's been tested and works perfect.
70
#/f/attachment.php?attachmentid=90962&stc=1&d=1455613114

13. VVl pressure solenoid relocation kit. Comes with all the necessary hardware.
100
#/f/attachment.php?attachmentid=90963&stc=1&d=1455613143

14. Samco Radiator hoses.
30
#/f/attachment.php?attachmentid=90964&stc=1&d=1455613162

15. S14 kouki power steering lines and reservoir.
75
#/f/attachment.php?attachmentid=90965&stc=1&d=1455613187

16. Power Commander III from a 2007 CBR600.
250
#/f/attachment.php?attachmentid=90966&stc=1&d=1455613218

17. Coil Pack with the Harness. I have three sets.
100 each
#/f/attachment.php?attachmentid=90967&stc=1&d=1455613243
#/f/attachment.php?attachmentid=90968&stc=1&d=1455613251
#/f/attachment.php?attachmentid=90969&stc=1&d=1455613267

14. Igniter with the Harness.
50
#/f/attachment.php?attachmentid=90970&stc=1&d=1455613349

15. Auto Gauge 11k RPM gauge with the shift light. It has a switch in the back for 4,6,8 cylinders.
100
#/f/attachment.php?attachmentid=90971&stc=1&d=1455613372


16. SR Exhaust gasket.
10
#/f/attachment.php?attachmentid=90972&stc=1&d=1455613399

17. 5 speed drive shaft from an S14, i am pretty sure it was non ABS.
50
#/f/attachment.php?attachmentid=90973&stc=1&d=1455613418

18. VVL stock Cams P11.
150

19. KA24DE 232/248 camshafts.
100
outlawstar1023
02-16-2016, 01:46 PM
Lets Get this stuff Sold..!!
outlawstar1023
02-17-2016, 09:29 PM
Bump. Pictures added.
Def
02-19-2016, 05:54 PM
Good stuff here
outlawstar1023
02-23-2016, 11:31 PM
BUMP to the top
speedgod^s13
02-24-2016, 03:47 AM
Is the manifold a v1, or v2?
outlawstar1023
02-24-2016, 03:56 AM
Are you referring to the intake manifold? I am not sure how to tell the difference. But it is probably V1
outlawstar1023
03-04-2016, 05:41 AM
Bump it up

Sent from my SM-G920P using Tapatalk
outlawstar1023
03-15-2016, 12:29 AM
Pretty flexible on the pricing.

Sent from my SM-G930P using Tapatalk
outlawstar1023
03-21-2016, 12:42 AM
Stuff still for sale

Sent from my SM-G930P using Tapatalk
urk
03-24-2016, 12:41 AM
Ogura clutch is tempting
Po_31
03-24-2016, 12:44 AM
does the intake mani comes with all the fittings?
outlawstar1023
03-24-2016, 12:58 AM
With everything you need. If I still had the thermal intake gasket, i would have included that too

Sent from my SM-G930P using Tapatalk
outlawstar1023
04-05-2016, 04:40 PM
Bump

Sent from my SM-G930P using Tapatalk
outlawstar1023
08-16-2016, 10:25 PM
Bump

Sent from my SM-G930P using Tapatalk