PDA

View Full Version : sr20 s13 help please


silhaydy
02-14-2016, 03:27 PM
So i just traded my car for a sil80 with a blacktop sr20 and it drove fine yesterday which was the first day I got it. Today however, if i accelerate with over 50% throttle it seems, once the rpms get to around 3-3.5k it stops rising and the car will backfire and buck back and forth. Boost gauge is working fine and it does what it was doing when it drove normally but once i reach 3.5k or so rpm boost drops and the air fuel ratio gauge also cuts out and reads --- when that happens. I also have an apexi safc which i havent changed any settings on since I got it yesterday and it was fine then. Im not really sure what to do this is my first 240 and first turbocharged car so i dont have a ton of expeirience with this yet. If you guys can help me figure this out i would greatly appreciate it thanks. Sorry if i have spelling errors or grammar i tried my best....

Nissan87
02-19-2016, 04:56 PM
have you checked for boost leaks?

derass
02-19-2016, 06:43 PM
Try disconnecting the knock sensor.

silverarrow27
02-19-2016, 06:56 PM
MAF or AFC settings

silhaydy
02-19-2016, 10:50 PM
Thanks guys it got it figgured out i think the air flow sensor was unplugged a little bit...

derass
02-20-2016, 01:42 AM
Does your connector have the metal retainer? It's strange that it would come undone.

http://cdn6.bigcommerce.com/s-b03t074/products/971/images/2496/SR20DET_MAF_Sensor_Connector3__66675.1442695334.12 80.1280.jpg?c=2

silhaydy
02-20-2016, 06:23 PM
Yea it looks just like that picture. It was loose but i plugged it back in and its been fine since.. Idk how it came undone either?