CamryOnBronze
02-10-2016, 07:48 PM
SOLD SOLD SOLD!
FOR SALE: Trust GREX aluminum shift knobs, M12x1.25 thread pitch, Type T. I have two of these left, both of them are the BLUE version (pictured middle on the second photo.) These are likely the last of the last in brand new condition- a classic shift knob!
I realized during shipping that a couple of these shift knobs were a different design than the others. They have a small "lip" at the bottom and are threaded more towards the bottom of the knob than the top like the others. That being said, I personally can't confirm that you can use an adapter to run these on a M10x1.25 vehicle (like a Nissan.) There's a good chance that you can modify an adapter or come up with a solution to use these, but I personally can't say from experience it is possible like I could with the other ones I sold (which were all Type S.)
https://c2.staticflickr.com/2/1605/24951356036_8cf1d67ed4_b.jpg
https://c2.staticflickr.com/2/1675/24653201300_34f014fc99_b.jpg
Type T knob (the ones being sold here) shown on the left vs. the Type S I sold previously. You can see that the threads are closer to the bottom of the knob, making it difficult to utilize an adapter. It MAY still be possible, but I personally can't confirm. Purchase at your own risk knowing it may take some work to use this knob if your vehicle is not M12x1.25.
https://c2.staticflickr.com/2/1523/24610043999_b265910b25_c.jpg
https://c2.staticflickr.com/2/1684/24350794313_d25acec0e6_b.jpg
SOLD SOLD SOLD!
Damon
FOR SALE: Trust GREX aluminum shift knobs, M12x1.25 thread pitch, Type T. I have two of these left, both of them are the BLUE version (pictured middle on the second photo.) These are likely the last of the last in brand new condition- a classic shift knob!
I realized during shipping that a couple of these shift knobs were a different design than the others. They have a small "lip" at the bottom and are threaded more towards the bottom of the knob than the top like the others. That being said, I personally can't confirm that you can use an adapter to run these on a M10x1.25 vehicle (like a Nissan.) There's a good chance that you can modify an adapter or come up with a solution to use these, but I personally can't say from experience it is possible like I could with the other ones I sold (which were all Type S.)
https://c2.staticflickr.com/2/1605/24951356036_8cf1d67ed4_b.jpg
https://c2.staticflickr.com/2/1675/24653201300_34f014fc99_b.jpg
Type T knob (the ones being sold here) shown on the left vs. the Type S I sold previously. You can see that the threads are closer to the bottom of the knob, making it difficult to utilize an adapter. It MAY still be possible, but I personally can't confirm. Purchase at your own risk knowing it may take some work to use this knob if your vehicle is not M12x1.25.
https://c2.staticflickr.com/2/1523/24610043999_b265910b25_c.jpg
https://c2.staticflickr.com/2/1684/24350794313_d25acec0e6_b.jpg
SOLD SOLD SOLD!
Damon