Z32 TT Driver Side Axle + Q45 Driver Side Axle Big Power Upgrade

[KiLLeR2001]

Let's see who's ready to step their power game up proper. What I have here is an OEM set of Z32 300zx Twin Turbo LH Driver Side Axle and a G50 Q45 LH Driver Side Axle. No torn boots, axle washer, nut, and crown included. When installing into your 240sx, the shorter z32 axle goes on the driver side and the longer q45 axle goes on the passenger side. I measured the lengths of both axles and their lengths are near identical to the stock 240sx axles. Stock axles are 29-Spline these monsters are 32-Spline.

Now in order to get these into a 240sx you will need either the Z32TT hubs or the Q45 hubs, they are the same thing. Then you will need a differential with 6x1 output shafts.

http://tehl33tsite.com/240sxdd/fs/diffs/axles/IMAG3502.jpg

http://tehl33tsite.com/240sxdd/fs/diffs/axles/IMAG3503.jpg

http://tehl33tsite.com/240sxdd/fs/diffs/axles/IMAG3504.jpg

$625 shipped anywhere in the continental USA!

If you have any questions send me a PM!

[KiLLeR2001]

Bump it up!!!

[KiLLeR2001]

Bump it up!!!

[KiLLeR2001]

$600 shipped!

Doooo it!

[KiLLeR2001]

Bump it up!

[Smokey_Paz]

You know the junkyards in sfl sell these axles for 60 a pop.....

[KiLLeR2001]

You know the junkyards in sfl sell these axles for 60 a pop.....

Looks like you got some work ahead of you then, good luck!

[KiLLeR2001]

Bump it up!!!

[wolf904]

I have said TT rear hubs needed to use this setup.. someone cop these and Ill hook it up for those

[Magnoliarichj]

600.00 lol

[Sergio180sx]

Hahahahah this is a joke right?

[Zenkilove490]

Somebody thinks they struck gold.

[Cubantunr]

I got lucky and picked mine up at a junkyard for like 80 all together but hey some people aren't as lucky. Glws

[Rb26kouki]

How much power can these hold

[Sergio180sx]

I bought mine around $180 refurbished online

[ethompson6]

Why wouldn't someone just buy DSS axles? LOL

[waterboy]

Got my axles shipped from Australia for about 150 lol

[KiLLeR2001]

Hahahahah this is a joke right?

Not at all.

Somebody thinks they struck gold.

Wrong.

I got lucky and picked mine up at a junkyard for like 80 all together but hey some people aren't as lucky. Glws

I've never encountered a Z32 Twin Turbo at a junkyard, but I'm sure it does happen on rare occasions.

How much power can these hold

Not sure but I would like to know if anyone has broken a set of these. They easily look like they can handle 800hp or more.

I bought mine around $180 refurbished online

Remanufactured axles are garbage. Anyone who has gone through the headache of remanned axles will know OEM is king.

Why wouldn't someone just buy DSS axles? LOL

Anyone who has broken axles with high amounts of torque knows that the weak point is in the spline / hub combination. Most of the time the axle sheers right off inside the hub. With this axle set up and upgraded Z32TT/Q45 hubs you get a beefier 32-spline hub which can handle way more abuse. The DSS axles are made to accomodate the stock 240sx hubs aka 29-spline weakness.

I'll be glad to answer any other questions from the peanut gallery.

[Sergio180sx]

Haven't had a issue at all using them on a RB25 and VH45 :2f2f:

[KiLLeR2001]

I've personally had issues with remanufactured axles, and know a few others who have also had issues. If someone handed me a set of axles and told me they were remanufactured I would honestly throw them in the trash.

[KiLLeR2001]

Bump it up!!!

[KiLLeR2001]

$585 shipped!!!

[adamhanna]

I think this is pretty reasonable, sure you might be able to piece it together for less but how long is that gonna take you? I've been looking for a z32 tt to grab parts from locally for 2 months now and haven't found anything

[KiLLeR2001]

I think this is pretty reasonable, sure you might be able to piece it together for less but how long is that gonna take you? I've been looking for a z32 tt to grab parts from locally for 2 months now and haven't found anything

Thanks!

Bump it up!

[Memberofthe600hpkaclub]

Considering the entire 3.54 swap usually sells for 500 glws

[KiLLeR2001]

Considering the entire 3.54 swap usually sells for 500 glws

Link please.

[Memberofthe600hpkaclub]

Seen several setups sell on the drag only 240sx forum for 500 or less, just bought my personal 3.54 setup for 500 complete

[Memberofthe600hpkaclub]

But if you insist I have a spare driverside TT Axel I'll sell you for 300 for you to profit on

[KiLLeR2001]

Seen several setups sell on the drag only 240sx forum for 500 or less, just bought my personal 3.54 setup for 500 complete

I could care less what you just bought from another person (who already did all the work for you piecing everything together).

Fact is, if you try to piece everything out and do all the required work to get said pieces. Yes you will ultimately spend less, but at the expense of spending more time and doing more work.

What I offer to people here is a service for those who may not have the luxury of finding these axles at their disposal. These axles are ready to go and I will ship anywhere in the USA.

[DAGeorgie]

I bought mine around $180 refurbished online

I had a set in my ls2s13 $200 refurbished from auto zone running 550 hp 600 tq and its been 3 years never had an issue and the kid that bought my car still is running them now street driving it he still has had no issue.

But hey people can ask what they want for anything, who knows maybe he will get 600 from someone desperate?

[KiLLeR2001]

$550 shipped! Firm!

[KiLLeR2001]

These have now been sold!!!