ghostly240
02-08-2016, 03:07 PM
I'll introduce myself. I'm Kyle and I'm currently in my senior year of highschool (as of starting this thread) and I'm currently in the Automotive Tech program at a tech college. (Pinellas Technical College) and I'm on my way to get my ASE certification.
Owning a 240 has always been a dream of mine. But finding one in Florida in somewhat good condition is a one and a million.
I found myself a 1992 240sx Hatchback. With 247,xxx miles on it. yes, that much. but it runs better than some lower ka’s that I see.
I paid $2600 for it and I guess you can say it came with some good things and some bad things.
This will be my daily driver as I work on it to bring it back to life. The plan is to restore it, or restomod if you wanna say that. Not gutting it, no welded diff. Just a clean 240. Let's get started.
http://i.imgur.com/iM9xZa2.jpg
http://i.imgur.com/FfehwP8.jpg
http://i.imgur.com/2tSxNBf.jpg
Paint isn't that perfect, but just look at that dash.
Took it up to school to look up underneath it. Too bad it's on ebay coils :(
http://i.imgur.com/Vweyx9l.jpg
http://i.imgur.com/mJfqYZm.jpg
Car was super low on oil, so went and got high mileage 5w-30 and filled her up.
The car had been smoking a bit, so I decided to take it back to school and get a compression test done.
http://i.imgur.com/IJFriHp.jpg
I got
1 - 190
2 - 185
3 - 195
4 - 190
So everything checked out good there.
here's just some pics of around my school
http://i.imgur.com/M7K2ynI.jpg
http://i.imgur.com/lWTDyu2.jpg
I started getting tired of looking at my old nasty carpet and decided to do something about it
(This was just a temporary fix until I get around to replacing the carpet)
http://i.imgur.com/gGwvj0E.jpg
http://i.imgur.com/7K9pw8F.jpg
http://i.imgur.com/FeQBFnF.jpg
Now first things first, I wanted to get this painted before I did anything else. Before new suspension, new wheels, etc. I think that a good paint job alone would make this car look amazing. But I wasn’t going to go cheap and just got to maaco to get it sprayed for $500 or whatever. I wanted this done right. I got a friend that goes to the same school as me but for auto body. He painted his Integra and did all the bodywork and it came out amazing. So I hit him up, he gave me a deal that I couldn’t pass up. All the body work done, spray the car, and wet sand and buff for less than $2k. That’s a deal if you ask me.
I also got my center console and radio bezel sprayed by him and if you ask me it was worth it.
http://i.imgur.com/9PBJfsa.jpg
http://i.imgur.com/YkLW9TT.jpg
http://i.imgur.com/jvdQ8Dt.jpg
In some photos you’ll probably see me driving with no driver side fender. That’s because I took it off because it wasn’t sitting flush like it is on the passenger side.Plus I wanted to tuck the wires. If you know anything about this cars, you know the fender bolts on to the pinch weld done by the floor. Well my pinch welds are smashed and I basically had to cut it off with an angle grinder. I was able to leave enough on there to where I can find a way to bolt it back up, I was thinking rivets, but after test fitting it, it still didn’t sit flush, so I’m still working on that.
We start right the driver side quarter panel. The only hard part about doing the bodywork is getting all the clear off. No need to go to bare metal.
http://i.imgur.com/WUyg0I5.jpg
http://i.imgur.com/cShMSJc.jpg
Well he got that finished, primed it up so that I could drive it during the week.
For anyone that know stuff about body work. Yes, he did do hard lines on the primer. We’re planning on filling all the dings and dents, priming the car, sanding the whole thing with 220 and then priming whole car again.
The next weekend came by and we decided to get the hood and hatch done. He said that the hood is a pain in the ass. He’s trying to get it perfect, since the hood is what people always see.
http://i.imgur.com/R062WqJ.jpg
http://i.imgur.com/vGjscIs.jpg
http://i.imgur.com/ZqjiZoO.jpg
http://i.imgur.com/wgrLSXF.jpg
http://i.imgur.com/X8NRDG4.jpg
As you can see, this car has had body work done too it before. The bondo showing in the picture is from a previous repair. So I basically confirmed my question to if this car had been resprayed before. (obviously a shitty job)
Next week is the rest of the hood and other quater panel.
Owning a 240 has always been a dream of mine. But finding one in Florida in somewhat good condition is a one and a million.
I found myself a 1992 240sx Hatchback. With 247,xxx miles on it. yes, that much. but it runs better than some lower ka’s that I see.
I paid $2600 for it and I guess you can say it came with some good things and some bad things.
This will be my daily driver as I work on it to bring it back to life. The plan is to restore it, or restomod if you wanna say that. Not gutting it, no welded diff. Just a clean 240. Let's get started.
http://i.imgur.com/iM9xZa2.jpg
http://i.imgur.com/FfehwP8.jpg
http://i.imgur.com/2tSxNBf.jpg
Paint isn't that perfect, but just look at that dash.
Took it up to school to look up underneath it. Too bad it's on ebay coils :(
http://i.imgur.com/Vweyx9l.jpg
http://i.imgur.com/mJfqYZm.jpg
Car was super low on oil, so went and got high mileage 5w-30 and filled her up.
The car had been smoking a bit, so I decided to take it back to school and get a compression test done.
http://i.imgur.com/IJFriHp.jpg
I got
1 - 190
2 - 185
3 - 195
4 - 190
So everything checked out good there.
here's just some pics of around my school
http://i.imgur.com/M7K2ynI.jpg
http://i.imgur.com/lWTDyu2.jpg
I started getting tired of looking at my old nasty carpet and decided to do something about it
(This was just a temporary fix until I get around to replacing the carpet)
http://i.imgur.com/gGwvj0E.jpg
http://i.imgur.com/7K9pw8F.jpg
http://i.imgur.com/FeQBFnF.jpg
Now first things first, I wanted to get this painted before I did anything else. Before new suspension, new wheels, etc. I think that a good paint job alone would make this car look amazing. But I wasn’t going to go cheap and just got to maaco to get it sprayed for $500 or whatever. I wanted this done right. I got a friend that goes to the same school as me but for auto body. He painted his Integra and did all the bodywork and it came out amazing. So I hit him up, he gave me a deal that I couldn’t pass up. All the body work done, spray the car, and wet sand and buff for less than $2k. That’s a deal if you ask me.
I also got my center console and radio bezel sprayed by him and if you ask me it was worth it.
http://i.imgur.com/9PBJfsa.jpg
http://i.imgur.com/YkLW9TT.jpg
http://i.imgur.com/jvdQ8Dt.jpg
In some photos you’ll probably see me driving with no driver side fender. That’s because I took it off because it wasn’t sitting flush like it is on the passenger side.Plus I wanted to tuck the wires. If you know anything about this cars, you know the fender bolts on to the pinch weld done by the floor. Well my pinch welds are smashed and I basically had to cut it off with an angle grinder. I was able to leave enough on there to where I can find a way to bolt it back up, I was thinking rivets, but after test fitting it, it still didn’t sit flush, so I’m still working on that.
We start right the driver side quarter panel. The only hard part about doing the bodywork is getting all the clear off. No need to go to bare metal.
http://i.imgur.com/WUyg0I5.jpg
http://i.imgur.com/cShMSJc.jpg
Well he got that finished, primed it up so that I could drive it during the week.
For anyone that know stuff about body work. Yes, he did do hard lines on the primer. We’re planning on filling all the dings and dents, priming the car, sanding the whole thing with 220 and then priming whole car again.
The next weekend came by and we decided to get the hood and hatch done. He said that the hood is a pain in the ass. He’s trying to get it perfect, since the hood is what people always see.
http://i.imgur.com/R062WqJ.jpg
http://i.imgur.com/vGjscIs.jpg
http://i.imgur.com/ZqjiZoO.jpg
http://i.imgur.com/wgrLSXF.jpg
http://i.imgur.com/X8NRDG4.jpg
As you can see, this car has had body work done too it before. The bondo showing in the picture is from a previous repair. So I basically confirmed my question to if this car had been resprayed before. (obviously a shitty job)
Next week is the rest of the hood and other quater panel.