Lexus Gs300 Track ready Complete Rolling Shell (Cage, Suspension, etc)

[Slide_ways14]

1999 Lexus Gs300 (CLEAN TITLE)
160,XXX on Chassis

Chassis is track ready for any type of engine of your choosing and it is ready to go, Car handles amazing with the full cage and suspension. It's already manual swapped.

My asking price is $10,000 OBO

Engine/Chassis

Aeromotive Fuel Pump 340lph
Custom -an fitting stainless lines for the Fuel feed and fuel return
Drift motion in line Fuel filter
Custom aluminum power steering reservoir -6AN return -10AN feed
-6AN stainless steel lines for the steering rack both return and feed



Suspension:

Powerd by max coil overs 22kg 20kg
40mm front RCA
New inner and outer tie rods
New lower ball joints
Top speed front under brace
SPC front upper control arms
Front and rear blue TRD stabilizer bar
Battle version Aluminum steering rack bushing
Battle version rear upper control arms (Track version)
Battle version rear toe arms
Battle version rear traction arm
Battle version solid differential bushings

Interior:

Full custom 6 point weld-in cage
NRG short hub
NRG quick release
Momo 350mm deep corn leather
ASD hydraulic e brake & custom lines
Joe's Racing rear view mirror
1100watt CRUNCH amp
1000watt Kicker 12in sub
Battery relocated to trunk

Exterior:

Authentic BN sports full body kit
OEM Toyota window visors
OEM Toyota chrome door handles
Depo LED taillights
Serial nine rear quarter panels
Custom hibino style fenders
Toyota aristo Front grille
Custom purple amethyst pearl with gold flakes


Brakes:

Front- (under 500 miles)

Stoptech rotors and pads

Rear- (under 500 miles)

Wilwood 4 piston BBK
Wilwood 324mm rotors
Wilwood brake pads
Wilwood stainless steel lines


http://i141.photobucket.com/albums/r78/aadaamm/DSC_6748.jpg (http://s141.photobucket.com/user/aadaamm/media/DSC_6748.jpg.html)
http://i141.photobucket.com/albums/r78/aadaamm/DSC_6761.jpg (http://s141.photobucket.com/user/aadaamm/media/DSC_6761.jpg.html)
http://i141.photobucket.com/albums/r78/aadaamm/DSC_6752.jpg (http://s141.photobucket.com/user/aadaamm/media/DSC_6752.jpg.html)
http://i141.photobucket.com/albums/r78/aadaamm/DSC_6842.jpg (http://s141.photobucket.com/user/aadaamm/media/DSC_6842.jpg.html)
http://i141.photobucket.com/albums/r78/aadaamm/DSC_6592.jpg (http://s141.photobucket.com/user/aadaamm/media/DSC_6592.jpg.html)
http://i141.photobucket.com/albums/r78/aadaamm/DSC_6751.jpg (http://s141.photobucket.com/user/aadaamm/media/DSC_6751.jpg.html)
http://i141.photobucket.com/albums/r78/aadaamm/DSC_6779.jpg (http://s141.photobucket.com/user/aadaamm/media/DSC_6779.jpg.html)
http://i141.photobucket.com/albums/r78/aadaamm/DSC_6782.jpg (http://s141.photobucket.com/user/aadaamm/media/DSC_6782.jpg.html)
http://i141.photobucket.com/albums/r78/aadaamm/IMG_6129.jpg (http://s141.photobucket.com/user/aadaamm/media/IMG_6129.jpg.html)
http://i141.photobucket.com/albums/r78/aadaamm/IMG_6132.jpg (http://s141.photobucket.com/user/aadaamm/media/IMG_6132.jpg.html)
http://i141.photobucket.com/albums/r78/aadaamm/IMG_6133.jpg (http://s141.photobucket.com/user/aadaamm/media/IMG_6133.jpg.html)
http://i141.photobucket.com/albums/r78/aadaamm/IMG_6134.jpg (http://s141.photobucket.com/user/aadaamm/media/IMG_6134.jpg.html)
http://i141.photobucket.com/albums/r78/aadaamm/IMG_6136.jpg (http://s141.photobucket.com/user/aadaamm/media/IMG_6136.jpg.html)
http://i141.photobucket.com/albums/r78/aadaamm/IMG_5970.jpg (http://s141.photobucket.com/user/aadaamm/media/IMG_5970.jpg.html)
http://i141.photobucket.com/albums/r78/aadaamm/IMG_6375.jpg (http://s141.photobucket.com/user/aadaamm/media/IMG_6375.jpg.html)

[Nirun]

Sorry if I missed it, but..

Asking price? Trades?

[Slide_ways14]

asking price is $10,000 OBO

[slowass14]

No mention of wheels and wing?

[Slide_ways14]

wont come with wheels and wing

New price $9,500 OBO

Ready for any motor of your choosing and its ready to go

[Bnr32gtr]

What clutch pedal/master did u use? What did u do with the ebrake? Thanks

[Slide_ways14]

What clutch pedal/master did u use? What did u do with the ebrake? Thanks

are you asking because you're interested on the car? or just asking lol..

Clutch pedal setup is from IS300 and the stock ebrake is still there, and active + a ASD hyrdo.

[Silviasurfer]

What wing is that?

[Slide_ways14]

Still Forsale, $9,000

Takes the complete rolling shell

[HellaSexyS13]

this thing looks mint! glws

[slideways14]

nice set up. how much does the chassis weigh?

[Slide_ways14]

nice set up. how much does the chassis weigh?

Last time I had it on a scale with engine and cage everything was around 3350lb
Without the engine and trans I would assume it's around 2000-2300lb

[Slide_ways14]

Bump to the top

9000$ takes the complete shell with everything on it listed on top.

[vianna_z33]

post some current photos

[240sx 626]

How much for seats

[[email protected]]

I'll buy tomorrow, well put a deposit. Can you message me your number or email me

[[email protected]]

For full price. 9500 cash

[Florex_240sx]

Beautiful car, saw this when it was featured. This would be a dream to buy, to bad budget is only 7k :{ Best of luck!

[badP4nda]

cleeeeeeaaaaaan

[sami_sr20]

Awesome car not joke ... Bump

[Neeekd]

STAY AWAY FROM THIS GUY ADAM. STRAIGHT UP SCAMMER

https://farm2.staticflickr.com/1666/25755661702_607ca72626_c.jpg (https://flic.kr/p/FeWuUN)

[Neeekd]

I'm not really sure what good this can do other than raise awareness,

Famous GS300 Purple fuckboi scammed me on his engine!

https://farm2.staticflickr.com/1478/25782621271_311ab31008_c.jpg (https://flic.kr/p/FhjF3X)246777_1225672020796144_8892432319997444026 _n (https://flic.kr/p/FhjF3X) by Nico Davila (https://www.flickr.com/photos/[email protected]/), on Flickr
https://farm2.staticflickr.com/1651/25851640416_e4e301f35a_c.jpg (https://flic.kr/p/Foqq3d)12871442_1225672100796136_88355785376012159 46_n (https://flic.kr/p/Foqq3d) by Nico Davila (https://www.flickr.com/photos/[email protected]/), on Flickr

Here's the post/ story:

**Got screwed over** Looking for any help** Share around**

Anybody good friends with Adam Mao, willing to help me out?

He fucked me over on his engine and has denied to compensate for the parts?
Long story short, I paid 9k$ for the entire setup (engine, tranny, harness, ecu, injectors, etc.)..

I got word last week from a technician at FFtec that they did a leak down test on the motor before I bought it and the motor was shit... So i asked adam, he told me what happened. Regardless, I didn't listen to the nay say, I did a leak down test myself. 5 times with two different testers, all getting the same results:

3 cylinders are bad. 1, 3, 4.

They're leaking over 20%. I contacted him and we argued for hours via text not coming to a resolution. Since then, he's blocked me and denied to pay for the bottom end or give me money back so I can rebuild the bottom, excluding shop labor. YES, I WAS GOING TO DO IT MYSELF.

He posted selling with Eagle Rods. He lied and admitted they are GTE rods. He went and re-edited his post today @ 5:29pm and deleted the rods. I have pictures of everything, and took a screenshot of the post at 2:29pm before he removed it. He lied about who built it or that he did/ instead of buying it.

I'm just trying to get my money back and be whole again and not screwed over. Any help I'd appreciate it guys.
Facebook DM me or text me 925-628-7956 if you have info for me

https://farm2.staticflickr.com/1682/25851641586_6e56663ec1_c.jpg (https://flic.kr/p/Foqqoo)https://farm2.staticflickr.com/1593/25782622481_d342ec0e2c_c.jpg (https://flic.kr/p/FhjFpP)
https://farm2.staticflickr.com/1529/25576990070_4523f37fb1_c.jpg (https://flic.kr/p/EY9L4q)
https://farm2.staticflickr.com/1706/25576990020_97f0c784ef_c.jpg (https://flic.kr/p/EY9L3y)
https://farm2.staticflickr.com/1705/25248830623_54765f1a18_c.jpg (https://flic.kr/p/Et9RFV)
https://farm2.staticflickr.com/1623/25782622121_793f18cae4_c.jpg (https://flic.kr/p/FhjFiB)
https://farm2.staticflickr.com/1647/25851641166_90fa0efd31_c.jpg (https://flic.kr/p/Foqqg9)
https://farm2.staticflickr.com/1709/25851641086_3f5e95ec67_c.jpg (https://flic.kr/p/FoqqeL)
https://farm2.staticflickr.com/1633/25877575195_028fe4dbfb_c.jpg (https://flic.kr/p/FqHkxz)
https://farm2.staticflickr.com/1706/25244869094_1629880529_c.jpg (https://flic.kr/p/EsNy4G)
https://farm2.staticflickr.com/1542/25756773692_d25809e67d_c.jpg (https://flic.kr/p/Ff3ct3)
https://farm2.staticflickr.com/1680/25244868974_a9a08ec46c_c.jpg (https://flic.kr/p/EsNy2C)
https://farm2.staticflickr.com/1575/25244868894_35a3446194_c.jpg (https://flic.kr/p/EsNy1f)
https://farm2.staticflickr.com/1561/25877574785_2ea714fec2_c.jpg (https://flic.kr/p/FqHkqv)
https://farm2.staticflickr.com/1524/25877574715_307703505b_c.jpg (https://flic.kr/p/FqHkpi)
https://farm2.staticflickr.com/1500/25782621431_53db5615f0_c.jpg (https://flic.kr/p/FhjF6H)
https://farm2.staticflickr.com/1677/25248829693_d5ec5756c3_c.jpg (https://flic.kr/p/Et9RpT)

[shinobiendo]

Do the right thing

I'm not really sure what good this can do other than raise awareness,

Famous GS300 Purple fuckboi scammed me on his engine!

https://farm2.staticflickr.com/1478/25782621271_311ab31008_c.jpg (https://flic.kr/p/FhjF3X)246777_1225672020796144_8892432319997444026 _n (https://flic.kr/p/FhjF3X) by Nico Davila (https://www.flickr.com/photos/[email protected]/), on Flickr
https://farm2.staticflickr.com/1651/25851640416_e4e301f35a_c.jpg (https://flic.kr/p/Foqq3d)12871442_1225672100796136_88355785376012159 46_n (https://flic.kr/p/Foqq3d) by Nico Davila (https://www.flickr.com/photos/[email protected]/), on Flickr

Here's the post/ story:

**Got screwed over** Looking for any help** Share around**

Anybody good friends with Adam Mao, willing to help me out?

He fucked me over on his engine and has denied to compensate for the parts?
Long story short, I paid 9k$ for the entire setup (engine, tranny, harness, ecu, injectors, etc.)..

I got word last week from a technician at FFtec that they did a leak down test on the motor before I bought it and the motor was shit... So i asked adam, he told me what happened. Regardless, I didn't listen to the nay say, I did a leak down test myself. 5 times with two different testers, all getting the same results:

3 cylinders are bad. 1, 3, 4.

They're leaking over 20%. I contacted him and we argued for hours via text not coming to a resolution. Since then, he's blocked me and denied to pay for the bottom end or give me money back so I can rebuild the bottom, excluding shop labor. YES, I WAS GOING TO DO IT MYSELF.

He posted selling with Eagle Rods. He lied and admitted they are GTE rods. He went and re-edited his post today @ 5:29pm and deleted the rods. I have pictures of everything, and took a screenshot of the post at 2:29pm before he removed it. He lied about who built it or that he did/ instead of buying it.

I'm just trying to get my money back and be whole again and not screwed over. Any help I'd appreciate it guys.
Facebook DM me or text me 925-628-7956 if you have info for me

https://farm2.staticflickr.com/1682/25851641586_6e56663ec1_c.jpg (https://flic.kr/p/Foqqoo)https://farm2.staticflickr.com/1593/25782622481_d342ec0e2c_c.jpg (https://flic.kr/p/FhjFpP)
https://farm2.staticflickr.com/1529/25576990070_4523f37fb1_c.jpg (https://flic.kr/p/EY9L4q)
https://farm2.staticflickr.com/1706/25576990020_97f0c784ef_c.jpg (https://flic.kr/p/EY9L3y)
https://farm2.staticflickr.com/1705/25248830623_54765f1a18_c.jpg (https://flic.kr/p/Et9RFV)
https://farm2.staticflickr.com/1623/25782622121_793f18cae4_c.jpg (https://flic.kr/p/FhjFiB)
https://farm2.staticflickr.com/1647/25851641166_90fa0efd31_c.jpg (https://flic.kr/p/Foqqg9)
https://farm2.staticflickr.com/1709/25851641086_3f5e95ec67_c.jpg (https://flic.kr/p/FoqqeL)
https://farm2.staticflickr.com/1633/25877575195_028fe4dbfb_c.jpg (https://flic.kr/p/FqHkxz)
https://farm2.staticflickr.com/1706/25244869094_1629880529_c.jpg (https://flic.kr/p/EsNy4G)
https://farm2.staticflickr.com/1542/25756773692_d25809e67d_c.jpg (https://flic.kr/p/Ff3ct3)
https://farm2.staticflickr.com/1680/25244868974_a9a08ec46c_c.jpg (https://flic.kr/p/EsNy2C)
https://farm2.staticflickr.com/1575/25244868894_35a3446194_c.jpg (https://flic.kr/p/EsNy1f)
https://farm2.staticflickr.com/1561/25877574785_2ea714fec2_c.jpg (https://flic.kr/p/FqHkqv)
https://farm2.staticflickr.com/1524/25877574715_307703505b_c.jpg (https://flic.kr/p/FqHkpi)
https://farm2.staticflickr.com/1500/25782621431_53db5615f0_c.jpg (https://flic.kr/p/FhjF6H)
https://farm2.staticflickr.com/1677/25248829693_d5ec5756c3_c.jpg (https://flic.kr/p/Et9RpT)

[Nirun]

:eek: Wow, that sucks.
I hope everything works out.

[Sergio180sx]

Oh damn that blows dude, well that being said i highly doubt we will a reply back from Adam lol

[Chachacha]

Sry for your lost, hope everything works out.. I'm not sure what a ATI super damper looks like but im sure that those are just driftmotion pulleys.. Best of luck to u bro.

[Magnezee]

I'm not really sure what good this can do other than raise awareness,

Famous GS300 Purple fuckboi scammed me on his engine!

Here's the post/ story:

**Got screwed over** Looking for any help** Share around**

Anybody good friends with Adam Mao, willing to help me out?

He fucked me over on his engine and has denied to compensate for the parts?
Long story short, I paid 9k$ for the entire setup (engine, tranny, harness, ecu, injectors, etc.)..

I got word last week from a technician at FFtec that they did a leak down test on the motor before I bought it and the motor was shit... So i asked adam, he told me what happened. Regardless, I didn't listen to the nay say, I did a leak down test myself. 5 times with two different testers, all getting the same results:

3 cylinders are bad. 1, 3, 4.

They're leaking over 20%. I contacted him and we argued for hours via text not coming to a resolution. Since then, he's blocked me and denied to pay for the bottom end or give me money back so I can rebuild the bottom, excluding shop labor. YES, I WAS GOING TO DO IT MYSELF.

He posted selling with Eagle Rods. He lied and admitted they are GTE rods. He went and re-edited his post today @ 5:29pm and deleted the rods. I have pictures of everything, and took a screenshot of the post at 2:29pm before he removed it. He lied about who built it or that he did/ instead of buying it.

I'm just trying to get my money back and be whole again and not screwed over. Any help I'd appreciate it guys.
Facebook DM me or text me 925-628-7956 if you have info for me


Sucks man, good thing you have plenty of documentation. I would start off by send him a general demand letter asking for money. This program will help you write one http://www.courts.ca.gov/11145.htm

Suggest you research small claims court, learn how it works.
http://www.courts.ca.gov/1007.htm

If I were you, I'd write a demand letter, asking you want all your money back and you return all his parts due to the damaged engine. Or you can ask for enough money to cover the repairs AND include labor, will need a quote from a repair shop on labor cost.

$10,000 limit in California small claims court, lots of non-profit that will help you through the process, it's time consuming but it actually moves fast once you get the ball rolling. Even the threat of a demand letter may have him opening up the wallet.

GL!

[slowass14]

I was on this untill it was 10k for a gs300 shell wih no wheels or wing...u can buy a running gs these days for 1000$ I doubt there's 9k in cage suspension and paint...unless you pay a shop 150$ an hour to put suspension in