Bleakley
01-28-2016, 12:15 AM
I have decided to sell my car. The intent is to use the money to better myself and go to school. Would love to sell this thing tomorrow if possible.
I was building the car with longevity in mind. The typical 555cc/S15 turbo package.
The way I built it is I used parts and components that far exceed the requirements of this setup. That way, as planned, I would be able to step up when money became available.
DISCLAIMER: NO TITLE --> But, all the painful fucking hard work has been done.
Long story short - Car sold to me, lady lied, had loan on it, about grand and a half.
I have negotiated and I just need to make one more phone call with money to purchase the car for $400 from the lien holder. They'll do what they need to do and then send the title to whatever address I want. If you purchase the car, I'll give you info you need and you can get a nice clean title. :)
Also, have car fax and whatnot..
So here it is:
1992 Nissan 240sx w/ ~220,000 miles
S13 '54c' redtop SR20DET rebuilt by some dude who tried putting it into a camaro..
Was 100% stock and running when I got it. Really needed some TLC though.
The car was also 115% stock with a ka24de factory 5-speed. I was actually able to get it running and drive it around for awhile before putting her under for the swap.
NOTE: The only cutting/alterations to the body/chassis are 4-8 holes for a few bolts, a battery tray that was grinded flush to the frame rail by the rad/core support, and a couple holes through the firewall for 1/0 welding cables for the battery relocation. I wanted to avoid cutting and hacking the car up as much as possible.
Mods list:
Engine internals are stock as far as I know (crank, rods, pistons, head, and cams)
Fuel, Ignition, and exhaust:
·S15 '91F00' ball bearing turbo (ran for one year with zilvia member Dalaz_68 and then sold to me. Has sat for ~ 2-3 years. VERY LOW miles) New DIF stainless steel oil and coolant lines
·Tomei L fpr
·Z32 fuel filter
·Bosch 044 fuel pump w/ Pegasus adapter and fuel sock
·LS2 truck coilpack conversion
·New plug wires
·New NGK BKR7EIX-11 spark plugs
·New yoke washers and stage 8 hardware for the exhaust manifold
·New S15 7-layer exhaust manifold gasket
·New turbo to manifold studs, gasket, and stage 8 hardware
·Tomei Turbo outlet, New gasket, New studs, again with stage 8 hardware
·New Nissan OEM S13 redtop 'skinny' O2 sensor
·New circuit sports 3" flex downpipe
·New Apexi 3" test pipe
·Apexi N1 dual exhaust
·Custom mid-mounted GREDDY intercooler that is baf... Intercooler is sandwiched between radiator and condenser.
·All couplers are HPS or ATP, no exceptions
·All connections (intake and charge) were made using T-bolt clamps.
·Tial QR BOV that is recirculated
·3.5" intake that transitions down to stock
·J30/Z32 N62 MAF sensor
·Apexi air filter
Electronics and Interior:
·Altima electric fans
·Quest alternator
·Wiring Specialties engine and trans harnesses
·Innovate LC-1 wideband with DB red gauge
·Autometer Sport-Comp electric fuel pressure gauge
·Autometer Sport-Comp mechanical boost/vac gauge
·Autometer Sport-Comp mechanical oil pressure gauge
·Autometer Sport-Comp electric oil temperature gauge
·Autometer Sport-Comp electric water temperature gauge
·Autometer Sport-Comp voltmeter gauge
·Battery relocated to hatch cargo area. 1/0 power and grounds. Lots of additional fuses for fans, gauges, and etc electronics. Lots of heat shrink, lots of conduit.
·S14 leather seats, stock rails
·Black, crackless dash
·ENTIRE interior converted from tan to black
Brakes, wheels, tires, and suspension:
·Stock brakes all around (have everything to run Z32 brakes other than the brakes themselves. Brand new 2+2 cables, brackets, Z32 e-brake backing plates, PDM SS conversion lines)
·DIF black drift knob for handbrake
·Xxr 522 16x7, +25, two bent rims.
·205/50-16 tires, barely any tread.
·100% stock suspension (circuit sports adjustable RUCA and traction links in box)
·J30 VLSD
Miscellaneous:
·S14 water outlet w/ temp sensor tapped and installed
I can include in the sale every spare part and knick knack I have in my storage unit as well, most expensive pieces being a couple transmissions, some suspension components, and a cheap engine crane.
$4,000
I know there is so much more I forgot/am not listing, but I'll answer any and all questions. Please feel free to get a hold of me @ (863)532-8831. My name is Chris. Again, $4,000 or best offer.
edit: deleted attachments...
I was building the car with longevity in mind. The typical 555cc/S15 turbo package.
The way I built it is I used parts and components that far exceed the requirements of this setup. That way, as planned, I would be able to step up when money became available.
DISCLAIMER: NO TITLE --> But, all the painful fucking hard work has been done.
Long story short - Car sold to me, lady lied, had loan on it, about grand and a half.
I have negotiated and I just need to make one more phone call with money to purchase the car for $400 from the lien holder. They'll do what they need to do and then send the title to whatever address I want. If you purchase the car, I'll give you info you need and you can get a nice clean title. :)
Also, have car fax and whatnot..
So here it is:
1992 Nissan 240sx w/ ~220,000 miles
S13 '54c' redtop SR20DET rebuilt by some dude who tried putting it into a camaro..
Was 100% stock and running when I got it. Really needed some TLC though.
The car was also 115% stock with a ka24de factory 5-speed. I was actually able to get it running and drive it around for awhile before putting her under for the swap.
NOTE: The only cutting/alterations to the body/chassis are 4-8 holes for a few bolts, a battery tray that was grinded flush to the frame rail by the rad/core support, and a couple holes through the firewall for 1/0 welding cables for the battery relocation. I wanted to avoid cutting and hacking the car up as much as possible.
Mods list:
Engine internals are stock as far as I know (crank, rods, pistons, head, and cams)
Fuel, Ignition, and exhaust:
·S15 '91F00' ball bearing turbo (ran for one year with zilvia member Dalaz_68 and then sold to me. Has sat for ~ 2-3 years. VERY LOW miles) New DIF stainless steel oil and coolant lines
·Tomei L fpr
·Z32 fuel filter
·Bosch 044 fuel pump w/ Pegasus adapter and fuel sock
·LS2 truck coilpack conversion
·New plug wires
·New NGK BKR7EIX-11 spark plugs
·New yoke washers and stage 8 hardware for the exhaust manifold
·New S15 7-layer exhaust manifold gasket
·New turbo to manifold studs, gasket, and stage 8 hardware
·Tomei Turbo outlet, New gasket, New studs, again with stage 8 hardware
·New Nissan OEM S13 redtop 'skinny' O2 sensor
·New circuit sports 3" flex downpipe
·New Apexi 3" test pipe
·Apexi N1 dual exhaust
·Custom mid-mounted GREDDY intercooler that is baf... Intercooler is sandwiched between radiator and condenser.
·All couplers are HPS or ATP, no exceptions
·All connections (intake and charge) were made using T-bolt clamps.
·Tial QR BOV that is recirculated
·3.5" intake that transitions down to stock
·J30/Z32 N62 MAF sensor
·Apexi air filter
Electronics and Interior:
·Altima electric fans
·Quest alternator
·Wiring Specialties engine and trans harnesses
·Innovate LC-1 wideband with DB red gauge
·Autometer Sport-Comp electric fuel pressure gauge
·Autometer Sport-Comp mechanical boost/vac gauge
·Autometer Sport-Comp mechanical oil pressure gauge
·Autometer Sport-Comp electric oil temperature gauge
·Autometer Sport-Comp electric water temperature gauge
·Autometer Sport-Comp voltmeter gauge
·Battery relocated to hatch cargo area. 1/0 power and grounds. Lots of additional fuses for fans, gauges, and etc electronics. Lots of heat shrink, lots of conduit.
·S14 leather seats, stock rails
·Black, crackless dash
·ENTIRE interior converted from tan to black
Brakes, wheels, tires, and suspension:
·Stock brakes all around (have everything to run Z32 brakes other than the brakes themselves. Brand new 2+2 cables, brackets, Z32 e-brake backing plates, PDM SS conversion lines)
·DIF black drift knob for handbrake
·Xxr 522 16x7, +25, two bent rims.
·205/50-16 tires, barely any tread.
·100% stock suspension (circuit sports adjustable RUCA and traction links in box)
·J30 VLSD
Miscellaneous:
·S14 water outlet w/ temp sensor tapped and installed
I can include in the sale every spare part and knick knack I have in my storage unit as well, most expensive pieces being a couple transmissions, some suspension components, and a cheap engine crane.
$4,000
I know there is so much more I forgot/am not listing, but I'll answer any and all questions. Please feel free to get a hold of me @ (863)532-8831. My name is Chris. Again, $4,000 or best offer.
edit: deleted attachments...