How many miles do you think are on my clutch?

[ANVIL]

Or what % worn do you think it is?

Stage 4 competition clutch put in new when i first swapped summer 06.
http://img.photobucket.com/albums/v708/ANV1L/Mobile%20Uploads/20160123_225109.jpg (http://smg.photobucket.com/user/ANV1L/media/Mobile%20Uploads/20160123_225109.jpg.html)

http://img.photobucket.com/albums/v708/ANV1L/Mobile%20Uploads/20160123_225200.jpg (http://smg.photobucket.com/user/ANV1L/media/Mobile%20Uploads/20160123_225200.jpg.html)
http://img.photobucket.com/albums/v708/ANV1L/Mobile%20Uploads/20160123_225135.jpg (http://smg.photobucket.com/user/ANV1L/media/Mobile%20Uploads/20160123_225135.jpg.html)
http://img.photobucket.com/albums/v708/ANV1L/Mobile%20Uploads/20160123_225147.jpg (http://smg.photobucket.com/user/ANV1L/media/Mobile%20Uploads/20160123_225147.jpg.html)

[KAT-PWR]

You're joking!? You want us to eyeball a few thousandths? Take some mic's and see what it measures compared to stock and what the service recommendation is.

[ANVIL]

I will eventually. Just wanted to see opinions. Waiting for email from CC on specs and recommendation for replacement

[Kingtal0n]

some clutch manufacturers use different thickness, I know when I wanted to buy a spec clutch they mentioned that spec uses a thicker disc

[Mitsubayati]

The pads look pretty close to the rivets. I'd say at this point, since you have it all apart, at least replace the clutch disc.

[ANVIL]

I measured it and its closer to new than it is at the discard limit. Real close to new so ill be reusing it

[ANVIL]

Its well within spec, im reusing it. Is it necessary to have the flywheel and clutch resurfaced?

[Hatemy7]

i say 100,000

[derass]

If you were previously using the same disc and flywheel together, you can get away without resurfacing as they have worn into each other.

Resurfacing is only required when you install a new disc with an old flywheel.

It wouldn't hurt anything to get yours resurfaced, it's just not absolutely required in this case.