17 x 9.5 on s13

[1FreshS13]

Hey guys, Im buying 17 x 9.5 inch wheels off someone locally. They have a +35 offset. The tires that are mounted are 225/45/17. The s13 is lowered 2" on lowering springs. Im wondering if they will fit, or will I need to pull the fenders?

[bansheeracer2003]

Id say a roll would be enough with that offset

[chris_240sx]

Wheel Fitment Question Thread (http://zilvia.net/f/showthread.php?t=392494&page=119)

[silviaks2nr]

You will need spacers in the front with coilovers and those tires are super skinny.

[adamhanna]

9.5 +12 with stock suspension arms will just clear with a nicely done roll. Only issues you'll have is what silviaks said

[jcrown7]

+35 should be pretty flush with the fender if rolled (http://www.willtheyfit.com/index.php?width=225&aspect=50&diameter=16&wheelwidth=9&offset=25&width2=245&aspect2=40&diameter2=17&wheelwidth2=9.5&offset2=35#content), used to have 16x9 +25 on the front of mine and they baaaaareeeely poked, keep an eye on clearance in the back
...and to piggyback on silvaks2nr's post, a 245/40 tire on 9.5's would give the same spacing/fitment as those 225/45's.
tire fitment link (http://www.willtheyfit.com/index.php?width=225&aspect=45&diameter=17&wheelwidth=9.5&offset=35&width2=245&aspect2=40&diameter2=17&wheelwidth2=9.5&offset2=35#content)


^links

[1FreshS13]

Thanks for the advice guys. Just picked up the wheels and realized they have 215/45 on the rims lol

[tuzzio]

I think the problem youre going to run into is the wheel hitting the spring/strut assembly.

[simmode1]

Terrible offset. Will probably need spacers and a roll.


Next time, check this before you buy:
Wheel Fitment Question Thread (http://zilvia.net/f/showthread.php?t=392494&page=119)


Oh and www.rimtuck.com (http://www.rimtuck.com)