_n3
01-09-2016, 11:16 PM
Yes, I'll ship everything here. Fedex ground.
I'm looking to sell the turbo setup (turbo, wastegate, manifold, and maybe injectors) as a whole first before I part each of them out. If it doesn't go in a couple of weeks I will part each one out. Thanks!
Up for sale I have a turbo setup that I didn't end up using. I purchased everything from brucebruceRB25 on these forums a little over a year ago.
Genuine Garrett gt3076r Turbo. Comes with all braided AN lines for coolant and oil. asking $700 for turbo and lines. $600 for turbo. - SOLD Normal in/out (as in less than you can visually see) shaft play. NO side to side play. Garrett 700382-5003.
http://i.snag.gy/Z3eWe.jpg
http://i.snag.gy/RG9Nw.jpg
http://i.snag.gy/BZb2z.jpg
http://i.snag.gy/4Zic8.jpg
http://i.snag.gy/Aer8P.jpg
http://i.snag.gy/S1C7P.jpg
here is me trying to show the lack of shaft play in a 70 second clip:
https://www.youtube.com/watch?v=633S8O3TBvI
https://www.youtube.com/watch?v=633S8O3TBvI
RB manifold with single 44mm wastegate port. Was on an rb20 build, fit my rb25 s13. ARP bolts. Ceramic coated. Asking $200 - SOLD
http://i.snag.gy/KQylZ.jpg
Tial 44mm wastegate. Was told it has 200miles on it. Is very clean other than light scratches I made when trying to install it. Comes with all fittings and springs. As well as a straight pipe that would point
towards the ground. Asking $300 - SOLD
http://i.snag.gy/0gA6Y.jpg
http://i.snag.gy/WoqM1.jpg
Eight denso 740cc injectors. comes with pigtails for 6, and the resistor box.
Asking $300 - SOLD
http://i.snag.gy/hRifT.jpg
Will give a package deal to everything above.
http://i.snag.gy/gVwpd.jpg
EVERYTHING ABOVE (TURBO SETUP) IS SOLD.
Other stuff:
rb25det trans clutch slave cylinder
Asking $50
http://i.snag.gy/9SE8r.jpg
8mm wheel spacers. fit my 5x114.3
Asking $20
http://i.snag.gy/9eP4m.jpg
http://i.snag.gy/mWVFc.jpg
RB25det trans speed sensor.
Asking $50
http://i.snag.gy/C9834.jpg
Jensen VM9410. Comes with harness. Flip up screen. Backup camera and video inputs. Nice unit. I'm running no radio at all now though. also comes with remote. (not pictured)
Asking $80.
http://i.snag.gy/D56hK.jpg
s13 pop up assemblies including the motors: (both sides)
asking $80
http://i.snag.gy/Ps5qH.jpg
http://i.snag.gy/r7irQ.jpg
Innovate LC-1 Wideband (actual o2 sensor not pictured, but it is in perfect shape)
Asking $90 - SOLD
http://i.snag.gy/Wrm3I.jpg
http://i.snag.gy/njWPs.jpg
300zx z32 rotors. two front rotors. brand new from 88rotors. asking $60.
http://i.snag.gy/sR5O9.jpg
http://i.snag.gy/kYz4t.jpg
http://i.snag.gy/ieK24.jpg
s13 inner and outer tie rods. bushings are torn..
offer
http://i.snag.gy/Vg6Zs.jpg
s13 rear brake assemblies. needs rebuilt.
offer.
http://i.snag.gy/AAm1s.jpg
Other things I have for sale:
Go pro hero 2 with LCD.
Trifecta FTDI ez flash cable
Regal 2011-2014 KN air filter
brand new beats urbeats earbud headphones
I'm looking to sell the turbo setup (turbo, wastegate, manifold, and maybe injectors) as a whole first before I part each of them out. If it doesn't go in a couple of weeks I will part each one out. Thanks!
Up for sale I have a turbo setup that I didn't end up using. I purchased everything from brucebruceRB25 on these forums a little over a year ago.
Genuine Garrett gt3076r Turbo. Comes with all braided AN lines for coolant and oil. asking $700 for turbo and lines. $600 for turbo. - SOLD Normal in/out (as in less than you can visually see) shaft play. NO side to side play. Garrett 700382-5003.
http://i.snag.gy/Z3eWe.jpg
http://i.snag.gy/RG9Nw.jpg
http://i.snag.gy/BZb2z.jpg
http://i.snag.gy/4Zic8.jpg
http://i.snag.gy/Aer8P.jpg
http://i.snag.gy/S1C7P.jpg
here is me trying to show the lack of shaft play in a 70 second clip:
https://www.youtube.com/watch?v=633S8O3TBvI
https://www.youtube.com/watch?v=633S8O3TBvI
RB manifold with single 44mm wastegate port. Was on an rb20 build, fit my rb25 s13. ARP bolts. Ceramic coated. Asking $200 - SOLD
http://i.snag.gy/KQylZ.jpg
Tial 44mm wastegate. Was told it has 200miles on it. Is very clean other than light scratches I made when trying to install it. Comes with all fittings and springs. As well as a straight pipe that would point
towards the ground. Asking $300 - SOLD
http://i.snag.gy/0gA6Y.jpg
http://i.snag.gy/WoqM1.jpg
Eight denso 740cc injectors. comes with pigtails for 6, and the resistor box.
Asking $300 - SOLD
http://i.snag.gy/hRifT.jpg
Will give a package deal to everything above.
http://i.snag.gy/gVwpd.jpg
EVERYTHING ABOVE (TURBO SETUP) IS SOLD.
Other stuff:
rb25det trans clutch slave cylinder
Asking $50
http://i.snag.gy/9SE8r.jpg
8mm wheel spacers. fit my 5x114.3
Asking $20
http://i.snag.gy/9eP4m.jpg
http://i.snag.gy/mWVFc.jpg
RB25det trans speed sensor.
Asking $50
http://i.snag.gy/C9834.jpg
Jensen VM9410. Comes with harness. Flip up screen. Backup camera and video inputs. Nice unit. I'm running no radio at all now though. also comes with remote. (not pictured)
Asking $80.
http://i.snag.gy/D56hK.jpg
s13 pop up assemblies including the motors: (both sides)
asking $80
http://i.snag.gy/Ps5qH.jpg
http://i.snag.gy/r7irQ.jpg
Innovate LC-1 Wideband (actual o2 sensor not pictured, but it is in perfect shape)
Asking $90 - SOLD
http://i.snag.gy/Wrm3I.jpg
http://i.snag.gy/njWPs.jpg
300zx z32 rotors. two front rotors. brand new from 88rotors. asking $60.
http://i.snag.gy/sR5O9.jpg
http://i.snag.gy/kYz4t.jpg
http://i.snag.gy/ieK24.jpg
s13 inner and outer tie rods. bushings are torn..
offer
http://i.snag.gy/Vg6Zs.jpg
s13 rear brake assemblies. needs rebuilt.
offer.
http://i.snag.gy/AAm1s.jpg
Other things I have for sale:
Go pro hero 2 with LCD.
Trifecta FTDI ez flash cable
Regal 2011-2014 KN air filter
brand new beats urbeats earbud headphones