S13 SR20 Engine part out:Greddy Garrett ISR AEM etc

[drewr4411]

Hello. Im am parting out my S13 SR20 engine. Found out cylinder 2 is not good. I will be going a different direction with the car. Please contact me for any SR related parts. Some prices are negotiable. Everything is very high quality on this car. Please take the time to look. Most parts are still on the car. Once I have enough inquires I will start to take them off. please text me with any questions. I have much more not listed. If you don't see something just PM me with what your looking for.

S13 SR20 Engine part out:
-No reasonable offers turned down.
-Shipping and paypal fees are on the buyer.
-Location Manassas, VA 20110

Parts list:
AEM V1 ECU: $600.00 sold
AEM IAT sensor/ MAP sensor $75.00 apiece sold
Wiring Specialties Pro harness $400.00sold
Authentic Greddy Intake manifold: $300.00 (Sold as of 1/5/16)DY MI
Authentic Greddy Oil Pan: $200.00 sold
Garrett GT2871 BB: $500.00sold
HKS Injectors 740CC $300.00sold
ISR Turbo Manifold: $125.00sold
ISR Turbo Elbow $50.00 PENDING
Greddy Downpipe $40.00 (Sold as of 1/5/16)JL Texas
SR Coil Packs x8 $10.00 apiece. (SOLD 4 of them as of 1/5/16) JH Flordia x4 left
SR Coil ignitor $40.00(Sold as of 1/5/16)JL Texas
isis intercooler core sold sold
SR turbo piping still for sale. COLD SIDE only. Hot Side SOLD
Greddy Type S BOV $60.00(Sold as of 1/5/16)JL Texas
BC 264 Cams $200 OBO sold
CAS (Crank angle sensor) $50.00
Throttle Body for sale $75.00
SR IACV $35.00
SR Knock Sensor $30.00
TPS (Throttle position sensor) $40.00
Oil pressure sensor $20.00
SR alternato Rebuilt $80.00 sold
Mishimoto Starter $80.00 sold
ISR Short shifter $50.00 sold
Spec Clutch $100.00 sold
Spec Flywheel $100.00 sold
SR Tranny $100.00 PICKED UP only ZIP 20110
ARP Flywheel Bolts $20.00 sold
SR Driveshaft w/bracket $75.00
SR Valve cover w/hardware (Blue) $60.00
SR Fuel Rail $15.00 sold
SR upper oil Pan sold sold one have one left
ISR mid sr20 mid pipe $30.00
SR Crank pulley x2 sold both sets sold
SR Rocker arm stoppers X2 Both sets sold. Sold
Eagle Rods Sold
CP pistons x3 Sold
Stock SR pistons and Rods SOLD
Upper Water Neck x2 Sold 1 have 1 left
Block (IF good, which I believe it is asking $100.00)
Crank (If good, which I believe it is asking $100.00)
Head TBD (No good, but filled with BC springs retainers, 1 retainer looks damaged. but everything on the head is for sale.) PM offers


http://images.craigslist.org/00H0H_b6EpRcgYrje_600x450.jpg
http://images.craigslist.org/00z0z_f2t0NLqIr60_600x450.jpg
http://images.craigslist.org/00v0v_6dtEayfIgaK_600x450.jpg
http://images.craigslist.org/00H0H_kYeImc1YXCE_600x450.jpg
http://images.tapatalk-cdn.com/16/01/06/bae6796798c93f5aaa25d0c0bea405b9.jpg

[Chichos95]

You got a number? Interested in the injectors

[drewr4411]

You got a number? Interested in the injectors

pm'd with contact info

please send me a message with any inquires or if you need quicker contact info. I am on here fairly often.

[drewr4411]

Greddy Intake Manifold sold, throttle bracket and fuel rail spacers sold as of 1/5/16

[drewr4411]

Garrett turbo pending sale. Accepting higher bid on turbo.

Also added more items to the list. Please also reference new picture above.

[Smokey_Paz]

What intercooler do you have ? Couldn't load pics. My phone is stupid .and condition on cams?

[drewr4411]

Ecu harness sold
Turbo sold
Injectors sold
Manifold sold
Ignitor sold
Dp sold
Bov sold
Fmic sold
Isr isis shifter sold

Pulling more stuff off this weekend let me know if you Guys need something

[drewr4411]

What intercooler do you have ? Couldn't load pics. My phone is stupid .and condition on cams?

Fmic core is sold.

I'll pm you my cell and send you pics of the cams

[drewr4411]

Cams look like part#205 which is a 264 cam from Brian crower.

So update on that

[JAStirrett]

Interested in the 264's and the other 4 coilpacks shipped to 33579.

[rpierce]

Whats the mileage on the turbo? Does it have the internal wastegate and actuator? Any closeup pictures?

[imthedirector]

Selling that fpr?

[drewr4411]

Fpr not for sale as of now.
Turbo manifold are sold

I will pm you about the cams and coils

[Big Ben]

Sent you a PM

[90_S13]

Pics of oil pan?

[drewr4411]

Bump.

Block and head are fully removed. I can ship any piece at this time.

[crzsteveo]

I can vouch for Andrew... Met him personally and bought things from him. 110% satisfaction

[drewr4411]

I can vouch for Andrew... Met him personally and bought things from him. 110% satisfaction

Hey bud glad to hear you were happy with our transaction.

maybe you could leave me some feed back on my profile?
http://zilvia.net/f/member.php?u=189282

[vJilly]

What kind of clutch is it and do you have any gauges?

[S14kouki805]

+1 on the clutch how many miles on it?

[drewr4411]

No gauges @vjilly

Clutch is Spec drift style it's the 355mm setup over the 240mm setup

Link
http://www.enjukuracing.com/products/spec-d-complete-clutch-system-nissan-sr20det.html


Pics http://images.tapatalk-cdn.com/16/01/11/03698f316f8afcc0c2275f2ab04f2bf9.jpg
http://images.tapatalk-cdn.com/16/01/11/d00f5097b1dcf47cbd545a8d168c412b.jpg
http://images.tapatalk-cdn.com/16/01/11/6259ec673f3f82e8f9cea44e5415a4bc.jpg
http://images.tapatalk-cdn.com/16/01/11/f41f827d5797c68a5d0715c62d33abcc.jpg


Sent from my iPhone using Tapatalk

[drewr4411]

Greddy Pan and Cusco motor mounts for sale

http://images.tapatalk-cdn.com/16/01/11/8e8e0e13b578a2522e38e9ad61023b6d.jpg
http://images.tapatalk-cdn.com/16/01/11/31906a983aa0019e05088d185a530e67.jpg


http://images.tapatalk-cdn.com/16/01/11/67c3f9741100064936df9bc0b9430d4c.jpg
http://images.tapatalk-cdn.com/16/01/11/a4242e5b1c0d6405186d3dba31ccda82.jpg


Sent from my iPhone using Tapatalk

[RalliartRsX]

What kind of motor mounts are those and are they solid??

[drewr4411]

What kind of motor mounts are those and are they solid??

CUSCO Mounts

[monkichi57]

Any chance the pulleys (except for crank) for sale? shipped to 96789 please.

[drewr4411]

Any chance the pulleys (except for crank) for sale? shipped to 96789 please.

Yes


Ill send you a pm

[drewr4411]

S13 SR20DET aluminum radiator pics


https://uploads.tapatalk-cdn.com/20160112/2921d3ccca22b3d9f317bc7156cdb890.jpg


Sent from my iPhone using Tapatalk

[Slow96240sx]

How much for just the oil pan

[drewr4411]

How much for just the oil pan

I sent you a PM

[drewr4411]

More pics of stuff I have for sale

https://uploads.tapatalk-cdn.com/20160112/ddebf478d7c09ed26e709d880468c14b.jpg
https://uploads.tapatalk-cdn.com/20160112/aecd993285e5284e24e384185cb47624.jpghttps://uploads.tapatalk-cdn.com/20160112/bb63c97de1ac5875a83b2d599abb0099.jpg
https://uploads.tapatalk-cdn.com/20160112/f2e58741d6a264b4093e6eb354be724e.jpg
https://uploads.tapatalk-cdn.com/20160112/cfb7b7bc6da6e4529efef32d3343f829.jpg

This harness got burnt up on the Cas wire. Other sensors are fine. Willing to part out the harness $10.00 a sensor with wire leads.
https://uploads.tapatalk-cdn.com/20160112/0fd45ef89aa48fd0abfc7eea6afb228a.jpg


Sent from my iPhone using Tapatalk

[AVs14zz]

I'm interested on turbo elbow flywheel bolts and brake master cylinder shield

[drewr4411]

I'm interested on turbo elbow flywheel bolts and brake master cylinder shield

send me a PM thanks

[drewr4411]

Clutch flywhee sold
Alternator sold
Starter sold
Shifter sold
Fuel rail sold
Greddy oil pan sold

[Jason9011]

Hey, are you willing to sell the intercooler coldpipe?

[NDRTSR20240]

What's the story on the pistons and rods? Condition and price?

[drewr4411]

Hey, are you willing to sell the intercooler coldpipe?

Im willing to sell the cold pipe section yes please keep in mind that this was setup for a Greedy intake manifold also. Send me a pm and I will give you my cell.

[drewr4411]

What's the story on the pistons and rods? Condition and price?

Cyl 2 piston is done. Valve dropped. Rods should be ok and will be up for sale soon. send me a pm

[drewr4411]

Bump

Still have the following for sale.
Sr20 tranny
Block
Crank
throttle body
Motor sensor. TPS, CAS, Knock, and more
SR stock flywheel
SRT25 turbo condition unknown $25.00
Upper coolant neck
Lower coolant neck
Under intake manifold coolant lines
SR oem cam sprockets
SR oem upper oil pan
ISR test pipe
ISR Turbo elbow 3"
After makert pulleys
SR oem alt condition unknow sell cheap
SR oem coil packs condition unknow sell cheap

message me!

[S14kouki805]

Price on elbow

[drewr4411]

Elbow shipped is $75.00
3" only ran once, come with gaskets,

http://uploads.tapatalk-cdn.com/20160115/d95136efa02b078fee9ea30ce9574dff.jpg


Sent from my iPhone using Tapatalk

[cotbu]

Cold pipe to intercooler section, still available? Shipped to 19706.

Sent from my SM-N910T3 using Tapatalk

[s14sliding]

water neck have the coolant return fitting or is it the s13 neck?

[Paradoxx123]

Does the elbow fit t25 and t28? As in if I go from stock turbo to gt2871 I can remain with this elbow.

Sent from my Nexus 6P using Tapatalk

[drewr4411]

Cold pipe to intercooler section, still available? Shipped to 19706.

Sent from my SM-N910T3 using Tapatalk

$60.00 shipped

[drewr4411]

Does the elbow fit t25 and t28? As in if I go from stock turbo to gt2871 I can remain with this elbow.

Sent from my Nexus 6P using Tapatalk

Looks like its pending sale. And yes it fits that size as well.

[drewr4411]

water neck have the coolant return fitting or is it the s13 neck?

Sold an upper one. The others are gone, do you have a pic of what you need I might have it .

[cotbu]

$60.00 shipped
I'll take it if it comes with tbolt clamps and couplers


Sent from my SM-N910T3 using Tapatalk

[drewr4411]

I'll take it if it comes with tbolt clamps and couplers


Sent from my SM-N910T3 using Tapatalk

sure send me a pm

[thizzen4]

I need a Ignitor chip dm me if ones available

[Paradoxx123]

Let me know on the elbow. I am PayPal ready.

Sent from my Nexus 6P using Tapatalk

[drewr4411]

I need a Ignitor chip dm me if ones available

ignitor chip gone.

[drewr4411]

Let me know on the elbow. I am PayPal ready.

Sent from my Nexus 6P using Tapatalk

The 3" turbo elbow is kinda pending sale. But I would do $65.00 shipped.

[drewr4411]

Still got sensors, and throttle body.