Zenki/corner lights to turn signals ... Help

[Andrez10]

Hello, so basically i have a 240sx s14 1996 zenki, & i dont like my front bumper turn signals so im going to remove them, but i drive the car in the street, so i need turn signals, so i want to make my corner lights(next to headlight) my turn signal and parking light if possible? Anyone know how to do this? How do i go about rewiring the bumper signal wires to my corner lights to work as parking and signal light?
I heard the s13 is already like this not sure though
Any info appreciated thanks ...

[Jamaica]

my head hurts.......

[Andrez10]

Im just asking if any have experience with this, i researched it
But didnt really find :confused:exactly what i wanted nd im not the best when it comes to wiring

[Kuma]

you didn't research very long. took me longer to read this post than it did to find this... even without the pictures, it's simple to understand. common sense would lead me to believe you can then delete the turn signal... If it flashes too fast, then try putting a bulb back in the turn signal socket and hiding it behind your bumper.

http://www.240sxforums.com/forums/general-tech/67493-blinking-corner-light-how.html

[JAStirrett]

i researched it

People here on Zilvia are going to tell you that you need to search a topic prior to posting. Reading your post I'm unsure of what you really want to do, but this thread should get you started.

http://zilvia.net/f/showthread.php?t=114133&highlight=jdm+turn+signal

Although it is a different bumper, lights, etc., you will have to figure it out. Check the wiring schematics in the FSM here:

http://zilvia.net/f/showthread.php?t=431245

[silviaks2nr]

The factory 194 bulbs will be insufficient for lighting as turn signals. You will need to retrofit in a custom LED module (not a plug and play "bulb") to get adequate light.

[Andrez10]

okay thanks for the info...

[Andrez10]

People here on Zilvia are going to tell you that you need to search a topic prior to posting. Reading your post I'm unsure of what you really want to do, but this thread should get you started.

http://zilvia.net/f/showthread.php?t=114133&highlight=jdm+turn+signal

Although it is a different bumper, lights, etc., you will have to figure it out. Check the wiring schematics in the FSM here:

http://zilvia.net/f/showthread.php?t=431245


thanks, that helped me now ik where to start atleast.. I appreciate