S13 ka24de turbo hits master cylinder

[sil80arthur]

Hey guys, I've been looking around for a while and I can't really find much info on this. I found one post but there wasn't a solution on it so yeah I'll start my own. Specs: ka24de t3 turbo on a t3/t4 manifold. The turbo is a 70 trim, it's decently big but the issue I'm having is my manifold seems to be slightly bent towards the master cylinder. I believe this is because the manifold was made for rhd 240's? Anyways, any help or info will be greatly appreciated. I don't want to buy another manifold but if that's my last option then I will. so far I can only think of two options: 1 being cutting and re-welding the manifold, 2nd option being buying an adapter and use it as a spacer.. Then dealing with the hood not closing. Thanks for reading and again, any help is greatly appreciated.

[KAT-PWR]

It's a KA manifold it was never designed for RHD. You have a ghetto mani. Get it clocked/rewelded

[sil80arthur]

It's a KA manifold it was never designed for RHD. You have a ghetto mani. Get it clocked/rewelded
Oh I read that somewhere, not completely saying its a rhd manifold but thanks for the input!

[kruked]

Get rid of the master cylinder. Problem solved

[zerodameaon]

Dude, really, two threads? I get that you are new and from Florida but it is not needed. From now on one post per problem/period of time.

http://zilvia.net/f/showthread.php?t=620419

[sil80arthur]

Dude, really, two threads? I get that you are new and from Florida but it is not needed. From now on one post per problem/period of time.

http://zilvia.net/f/showthread.php?t=620419
Sorry, I thought since they were different problems in wouldn't matter, not sure what you're getting at by saying i'm from Florida though, completely irrelevant.

[waioeyu]

Get rid of the master cylinder. Problem solvedhttp://goo.gl/3uUr5c

[sil80arthur]

Update: I turned the manifold upside down so i guess it works as a bottom mount, but was sold to me as a top mount