r20crazy
12-16-2015, 11:31 AM
ALL are sold. SOLD SOLD SOLD
I have ZERO (2 pictured) unused SKULLWORKS legit KA (works on DE or E blocks) oil blocks I had for 3 different ka-t projects. real deals not copies. You will need to purchase 2 fittings for the connections as I pulled them for use in a dry sump setup. also if u don't need to use the 3 sensor/gage ports you will need to source up to 3, 1/8" NPT (aka pipe thread) plugs, which can be found at home depot.
these blocks are -8 AN sized. the fittings (need 2) needed to use these are in link below. A regular AN fitting on oil block side will not work. for mounting oil block to engine after removing stock oil filter mount, order a new paper gasket or us grey RTV silicone just don't clog ports.
http://www.jegs.com/i/Russell/799/670700/10002/-1
SOLD SOLD SOLD SOLD SOLD
http://i3.photobucket.com/albums/y81/r20crazy/240%20part/DSC05819_zpsva4e1vj9.jpg (http://s3.photobucket.com/user/r20crazy/media/240%20part/DSC05819_zpsva4e1vj9.jpg.html)
I have ZERO (2 pictured) unused SKULLWORKS legit KA (works on DE or E blocks) oil blocks I had for 3 different ka-t projects. real deals not copies. You will need to purchase 2 fittings for the connections as I pulled them for use in a dry sump setup. also if u don't need to use the 3 sensor/gage ports you will need to source up to 3, 1/8" NPT (aka pipe thread) plugs, which can be found at home depot.
these blocks are -8 AN sized. the fittings (need 2) needed to use these are in link below. A regular AN fitting on oil block side will not work. for mounting oil block to engine after removing stock oil filter mount, order a new paper gasket or us grey RTV silicone just don't clog ports.
http://www.jegs.com/i/Russell/799/670700/10002/-1
SOLD SOLD SOLD SOLD SOLD
http://i3.photobucket.com/albums/y81/r20crazy/240%20part/DSC05819_zpsva4e1vj9.jpg (http://s3.photobucket.com/user/r20crazy/media/240%20part/DSC05819_zpsva4e1vj9.jpg.html)