PDA

View Full Version : PA FS Sikky LSX Swap Long Tubes, LSX Swap Intake, and S14 Fortune 500's


Frew
12-12-2015, 03:57 PM
I have for sale my Sikky long tube headers for the s13/14 chassis. They are mild steel, I media blasted them before I put them on and sprayed them with high temp paint to stop rust. They are 1" 3/4 primaries and 3" collectors with PRL motorsports 3" self aligning stainless steel flanges leading to my custom 3" aluminized steel y pipe, the y pipe is wrapped in dei titanium heat wrap with summits steel clamps holding it on. It has another PRL vband flange out back leading to the stock location catback so you can add whatever axle back section you want. This is the complete solution to any s chassis ls swap, it includes 2 vband clamps to join the y pipe to the headers. SOLD
Next is my custom made 4" intake, it comes with a k&n filter and clamps. The silicone couplers are high quality five ply and even includes the intake air temp sensor and rubber bung. SOLD
All items have less than 3k miles on them and we're used for 6 months. Let me preface this by saying I do not put junk on my car nor do I sell junk, these are high quality parts and are priced accordingly. If you have any questions feel free to message me.

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xlp1/v/t1.0-9/12341051_10153880568921812_8898226948957689655_n.j pg?oh=1ca87568987537a7a3d484dd6ae8a5a4&oe=56EA7185

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/12310506_10153880568941812_814167469350804632_n.jp g?oh=c2fa488256ae0a669fc3e89f3320d88e&oe=572046EB

For sale the fortune 500 series coilovers off my s14, they have 4k miles on them. They come with the standard perches and the 60mm over perches (great if you're trying to fit a 28" tall tire). They are setup with 6k in the front and 5k in the rear, it also comes with 4k and 10k springs (pictured). SOLD

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/12241733_10153838603021812_816171237721974823_n.jp g?oh=4302b5c681f9498c34c8b1ac1ac5621d&oe=571EDA4A

Climb385
12-12-2015, 05:56 PM
Bump for a great dude and for quality parts!!! Can vouch for his stuff will be exactly as described

Frew
12-13-2015, 06:25 AM
Thanks bud!

Gandalgorph
12-13-2015, 06:59 PM
The Y pipe will definitely fit an s14?

Climb385
12-13-2015, 07:21 PM
They came off of the cleanest s14 zenki I've ever seen!!

Frew
12-13-2015, 08:07 PM
Yes, the long tubes and y pipe came off my s14

Frew
12-13-2015, 08:15 PM
It came off my personal car, as I said, I take alot of pride in my builds, I'm not the type to put shit parts on it or sell them for that matter
https://scontent-iad3-1.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/11032448_10153883058696812_3488747701860934213_n.j pg?oh=6f570801ea6daa166e664c1920dac67d&oe=56E1CA1E

my240issex
12-15-2015, 05:18 PM
How much for y pipe only

Frew
12-15-2015, 06:55 PM
350 plus shipping and fees

Gandalgorph
12-16-2015, 09:08 AM
Sorry I didn't follow up on this earlier. Come the beginning of January I'll check back if you haven't sold headers or y pipe cause I'm in need but I've got to wait for the holidays to pass

Frew
12-16-2015, 09:20 AM
No worries, I figure most of this stuff will move during tax season, I'm really not in a rush to sell any of the stuff I have, I don't need the money or anything.

Frew
12-23-2015, 07:42 AM
Exhaust is sold. Coilovers and intake still available

flipmike22
12-23-2015, 09:30 AM
Will definitely be contacting for the coils if some of my parts sell


Sent from my iPhone using Tapatalk

1993fdrx7
12-23-2015, 11:29 AM
dasmn i just saw this and wanted the exhaust.

Frew
12-28-2015, 08:47 AM
Intake sold coils still available

Frew
01-05-2016, 12:12 PM
Bump bump bump bump

Frew
01-10-2016, 06:58 AM
Bump, who needs quality coilovers?

Frew
01-14-2016, 05:29 PM
Bump to the top

Frew
01-22-2016, 05:21 PM
Coilovers sold