Poly Bushings for Rear Knuckle?

[West]

Just curious if anyone even makes Polyurethane bushings for the rear knuckle. I am pulling the ball joint out of the knuckle to finish the removal of HICAS. So I figured since Nissan wants 8+$ per bushing then I might as well get poly ones if there out there. Thanks!

PS: PDM Racing only has the rear arm bushings.

[MakotoS13]

energy suspension makes the bushings. i got a whole kit for everything under the car but i'm sure they sell smaller sets for specific purposes.

[Kid Zelda]

I'm not sure if they sell each bushing seprate but ES does make a rear suspension kit as Makolos12 said, cost under $40.00.

peep it
http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CP&Product_Code=7-3115G

BTW, part # 7.3115 if you plan to order elsewhere

[MakotoS13]

its only 40 and if ya just do the knuckles you can save the rest for when ya feel like replacing the arms' bushings.

[West]

Sweet! Thanks guys. I will have to order that. I have all aftermarket arms so no need for the other bushings, just the LCA bushings. Still thats a better price from them rather then Nissan.

[projectRDM]

That set does the upright, all the upper arms, and the Aarm. I just did mine a few weeks ago. I've got pillowball arms too so I sold the extra bushings for $25, meaning I paid a total of $15 for the upright and Aarm bushings. Note that you can order either the S13 or Z32 set, they're the same, but the Aarm bushing is actually shorter on both models than the S14 so you'll need to get a longer inner sleeve if you're using it on an S14. I ended up cutting the Aarma bushings in half like the Whitelines are done because they're much stiffer than the upright bushings and I couldn't press them in at all. I'm using Z32 uprights so they were very easy to do, the OE bushings press right out instead of needing to be cut/burned out.