PDA

View Full Version : FS: S13 SR20DET Swap, R32 Skyline rims, plus more


keske
09-07-2004, 10:02 AM
I have a few things leftover in my garage that I'd like to get rid of. All parts are located in the FS bay area. Local buyer prefered, but I can ship the smaller parts if needed. Please email me at kesket at covad dot net if you have questions. Do NOT PM as I do not always check my PM's. Thanks!

-1995-1996 S13 Blacktop SR20DET: Longblock, Ecu, Ignitor, wiring harness (plus near the battery were cut off, but you can solder on your KA24 plugs), accessories, SR20DET radiator, SMIC (w/ all piping), downpipe (stock), mounts, shifter, cluster, etc. This was purchased from Venus and compression tested. The SR20DET tranny is on its way out (I suspect a bad bearing from being run w/ little to no tranny oil), but I will throw in a KA24DE tranny w/ it so you can swap the bell housing (I can do this too for an extra cost). It's a complete swap. PRICE: $1350

-R32 GTS-T Rims (Kevin's old wheels) w/ tires. $250 Pickup only

-S14 SMIC w/ recirc valve and all piping: $75

-S14 SR20DET Radiator w/ shroud: $50

-Russel SS braided Z32 front brake lines, New in box: $50

-JDM 98 S14 Digital climate control, no harness: $5


Now for the FREE STUFF:

-JDM 97-98 S14 OEM (white) Side skirt end caps driver and passenger sides (fronts only): FREE (I took them off my clip since I figured someone could use them.)

-JDM 98 RHD S14 crossmember (good shape): FREE

-93 S13 4lug front and rear rotors, calipers, knuckles, parking brake: FREE

-93 S13 suspension front and rear: FREE

-93 S13 KA24DE Exhaust: FREE

-93 S13 front bumper support w/ foam (white): FREE

Email is key:
kesket at covad dot net

Xracer
09-07-2004, 03:33 PM
have an SR valve cover?

s13 Convertiable
09-07-2004, 04:56 PM
I may know someone who may want to get those knuckles of your hands
where exactley are you located

keske
09-07-2004, 05:53 PM
sorry, typo. I'm in CA. The knuckles will probably get picked up this week (locally).

sorry, no valve cover.

Ghettokracker71
09-08-2004, 12:57 PM
How much shipped for the SR swap with the bellhousing swapped to 23237?

Heh,its time for me to go turbo :rawk:

keske
09-08-2004, 03:44 PM
i'd rather not ship the swap unless i have to unless you know of a shipping company that will come to my house to pick it up (i just sold my truck too..).

speeddreamz
09-08-2004, 05:24 PM
where is SFBA , san francisco bay area im assuming, i'll take your gts rims !

email/ aim/ pm or call me on the cel

[email protected], aim: l240sxedl, 415-568-5551

Ricer240sx
09-08-2004, 10:18 PM
can u do $50 shipped on the lines?? if so u got pay pal??

keske
09-15-2004, 09:03 AM
Update, free stuff that's left:

-JDM 97-98 S14 OEM (white) Side skirt end caps driver and passenger sides (fronts only): FREE (I took them off my clip since I figured someone could use them.)

-JDM 98 RHD S14 crossmember (good shape): FREE

-93 S13 front bumper support w/ foam (white): FREE

Also, the SS brake lines are for the Z32 to S13 brake caliper conversion.

Email me if you are interested. thanks

lv-180sx
09-15-2004, 09:31 AM
Update, free stuff that's left:

-JDM 97-98 S14 OEM (white) Side skirt end caps driver and passenger sides (fronts only): FREE (I took them off my clip since I figured someone could use them.)

-JDM 98 RHD S14 crossmember (good shape): FREE

-93 S13 front bumper support w/ foam (white): FREE

Also, the SS brake lines are for the Z32 to S13 brake caliper conversion.

Email me if you are interested. thanks

how much to ship the bumper to 89135?

tar0icy_w/tapioca
09-15-2004, 07:56 PM
hi
u want to give away that sidemount w/ recirculation valve for $75 shipped, pretty please pleaseeeeeeeee, pretty pretty pleaseeeeeee, i'm in ATL, GA 30080

mrmephistopheles
09-15-2004, 08:02 PM
OMG hi2u, keske!
You get replacements for the GTS-ts?

nissan_driver24
09-15-2004, 11:23 PM
u got mail...

keske
09-16-2004, 08:45 AM
lol, how's japan kevin? yup, getting rid of the s13, so the wheels are going too. i never used them actually since i put the s14 se's on the car. time to clean out the garage for new projects!

replied to the emails. in regards to shipping the smic, there are a few local folks who are interested. sorry, but they get first dibs since shipping the entire thing would be a pain. thanks

mrmephistopheles
09-16-2004, 05:34 PM
lol, how's japan kevin? yup, getting rid of the s13, so the wheels are going too. i never used them actually since i put the s14 se's on the car. time to clean out the garage for new projects!


It's not bad. Tell me you at least got some use out of those wheels and tires, man!

drunkmonkalan
09-17-2004, 10:18 AM
hey
about that sr, what will i need to get it running other than swapping the bellhousing and soldering the plugs? i might be able to come pick this up, depending on whether or not i sell my tein he's. thx

95Blue240sx
09-17-2004, 10:48 AM
still got the wheels?

keske
09-17-2004, 11:14 AM
the wheels are available (pick up only).

the swap doesn't need much else to run other than the basics (vac lines, fuel lines, etc) that you would provide for any swap. if you want more information about the swap you can email me offline.

kevin - nope, i ended up getting an evo a while ago and never finished the s13 until recently. since the r32's were the 3rd set of wheels i had for the car, i'm getting rid of them and then i will get rid of the s13.

DRO916
09-17-2004, 03:46 PM
any pics of the wheels?

95Blue240sx
09-17-2004, 03:56 PM
im very interested about the wheels and i emailed you.

thanks.

evilimport
09-17-2004, 11:37 PM
you still got the s14 shroud? Email me if so, thats something I need...

[email protected]

keske
09-20-2004, 08:51 AM
Update: wheels, brake lines, bumper support (and foam), end caps, and s14 radiator are sold.

thanks

mrmephistopheles
09-20-2004, 09:10 AM
Ahhh.. well, enjoy the Evo! I'd probably buy your motorset if I were still there, but alas! I'm not!