ferrariowner123
11-29-2015, 08:28 PM
Hello all,
I've got some random bits I've been hoarding and i feel that its time to finally part with them. This is my first time selling on this forum, so i'll try and be as upfront and timely in reply's as I can. Paypal is a must and buyer will pay for 3% fees and shipping. I will get as accurate of shipping charges as i can. Everything is OBO but please limit the offers to something reasonable. Everything will be packed well and insured for the final agreed price.
First up, The first of two Digital NX1600 dashes. i don't recall the years, but i think i might be able to source that info, should you require it.
It does have some minor marks and cracks, most notably is the crack at the base of the RPM gauge. Wiring pigtails are included. Pulled from a junkyard $200 plus shipping
https://c1.staticflickr.com/1/726/23069452150_e84c56dece_c.jpg
https://c2.staticflickr.com/6/5760/23365232325_791f69db99_c.jpg
https://c1.staticflickr.com/1/566/22997312089_959eeb2f4b_c.jpg
https://c1.staticflickr.com/1/610/23282674961_1116c0aeb5_c.jpg
The second is in FAR better condition. Nothing really wrong with it, but its not factory perfect, it just came from a well taken care of, but definitely used car. The pictures will show some of the work i did to the loom, trying to make it work with my application, no modification were done to the housing. My Interest in the project faded and i never got around to putting it in my car. All my wiring will be cut off when shipped to you. I cannot confirm this works, but i bought this from someone parting out an intact car, so i really doubt it will have any issues. $275 plus shipping
https://c1.staticflickr.com/1/571/22736860634_861da05ac0_c.jpg
https://c2.staticflickr.com/6/5810/23256870452_db0334b9fc_c.jpg
https://c1.staticflickr.com/1/778/22738079023_218c8cd621_c.jpg
I also made this panel to make the Rev gauge and speedo work with my application. I would be willing to sell each unit off for $75 each or the whole panel for $180.
https://c2.staticflickr.com/6/5711/23365225305_871c7d77ba_c.jpg
https://c1.staticflickr.com/1/737/23365223775_03b7925071_c.jpg
Next i have some Nismo rear upper control Arms, Part number (from Box) is 55135 RS580. Near new condition. These will work on the S13 and R32 GTR and i think GTS-T (if there is a difference, please speak up) $185 Plus shipping.
https://c1.staticflickr.com/1/737/23282662181_2336190bec_c.jpg
https://c2.staticflickr.com/6/5811/23069434510_9295745f0d_c.jpg
https://c1.staticflickr.com/1/735/23339089416_c1f021716b_c.jpg
https://c1.staticflickr.com/1/748/23339087956_767e6678fe_c.jpg
https://c1.staticflickr.com/1/760/23069428670_1ee6fb19c7_c.jpg
Also Nismo is a set of R32/S13 traction links. Used condition, minor surface rust (VERY MINOR) and some dirt here and there, nothing that coat of paint and a new sticker wouldn't fix (if it really bothers you). $80 Plus shipping.
https://c1.staticflickr.com/1/641/23282653221_6e0d223ea3_c.jpg
https://c1.staticflickr.com/1/668/23339082446_7b1a550fdd_c.jpg
https://c2.staticflickr.com/6/5735/22997285399_7a5a1ce498_c.jpg
https://c2.staticflickr.com/6/5657/22738060623_cd2c8d527f_c.jpg
Next is an S13 HUD, was bought from a member on here a year or two ago. Was advertised as in working condition. $30 plus shipping.
https://c1.staticflickr.com/1/597/22997282129_0df4bcdf51_c.jpg
https://c2.staticflickr.com/6/5829/23365205195_7c90e9e3d2_c.jpg
Now were on the rare pieces I have. Two JDM S14 HUD Clusters!
First up is just a cluster, so you will need to track down the HUD on your own. Its in great shape, AND includes all the wiring you will need to make it work! $240 Plus Shipping
https://c2.staticflickr.com/6/5818/22736831024_8a675d3f41_c.jpg
https://c2.staticflickr.com/6/5784/22738051723_fb333aabb0_c.jpg
Saved the BEST FOR LAST! A nearly complete JDM S14 HUD Set! I say nearly complete because i don't have the factory Trim piece, but it wouldn't a LHD car anyway. Clear plastic is in great shape for its age, what you see in the photos is just smudges. I can take some better pictures for any weary buyer. The whole unit itself is in fantastic condition, no broken tabs, no discoloring of the cluster, virtually flawless. Wiring pigtails are included, and the one for the HUD is uncut! $440 plus shipping.
https://c2.staticflickr.com/6/5719/22736824124_c62fd482d2_c.jpg
https://c2.staticflickr.com/6/5797/23365192555_aaa684607d_c.jpg
https://c1.staticflickr.com/1/642/23365194045_becc2e2ace_c.jpg
https://c1.staticflickr.com/1/652/22997271309_53703cef26_c.jpg
https://c2.staticflickr.com/6/5692/23069412180_6388352147_c.jpg
That's all for now, please don't hesitate to ask questions.
Thank you
-Kyle
I've got some random bits I've been hoarding and i feel that its time to finally part with them. This is my first time selling on this forum, so i'll try and be as upfront and timely in reply's as I can. Paypal is a must and buyer will pay for 3% fees and shipping. I will get as accurate of shipping charges as i can. Everything is OBO but please limit the offers to something reasonable. Everything will be packed well and insured for the final agreed price.
First up, The first of two Digital NX1600 dashes. i don't recall the years, but i think i might be able to source that info, should you require it.
It does have some minor marks and cracks, most notably is the crack at the base of the RPM gauge. Wiring pigtails are included. Pulled from a junkyard $200 plus shipping
https://c1.staticflickr.com/1/726/23069452150_e84c56dece_c.jpg
https://c2.staticflickr.com/6/5760/23365232325_791f69db99_c.jpg
https://c1.staticflickr.com/1/566/22997312089_959eeb2f4b_c.jpg
https://c1.staticflickr.com/1/610/23282674961_1116c0aeb5_c.jpg
The second is in FAR better condition. Nothing really wrong with it, but its not factory perfect, it just came from a well taken care of, but definitely used car. The pictures will show some of the work i did to the loom, trying to make it work with my application, no modification were done to the housing. My Interest in the project faded and i never got around to putting it in my car. All my wiring will be cut off when shipped to you. I cannot confirm this works, but i bought this from someone parting out an intact car, so i really doubt it will have any issues. $275 plus shipping
https://c1.staticflickr.com/1/571/22736860634_861da05ac0_c.jpg
https://c2.staticflickr.com/6/5810/23256870452_db0334b9fc_c.jpg
https://c1.staticflickr.com/1/778/22738079023_218c8cd621_c.jpg
I also made this panel to make the Rev gauge and speedo work with my application. I would be willing to sell each unit off for $75 each or the whole panel for $180.
https://c2.staticflickr.com/6/5711/23365225305_871c7d77ba_c.jpg
https://c1.staticflickr.com/1/737/23365223775_03b7925071_c.jpg
Next i have some Nismo rear upper control Arms, Part number (from Box) is 55135 RS580. Near new condition. These will work on the S13 and R32 GTR and i think GTS-T (if there is a difference, please speak up) $185 Plus shipping.
https://c1.staticflickr.com/1/737/23282662181_2336190bec_c.jpg
https://c2.staticflickr.com/6/5811/23069434510_9295745f0d_c.jpg
https://c1.staticflickr.com/1/735/23339089416_c1f021716b_c.jpg
https://c1.staticflickr.com/1/748/23339087956_767e6678fe_c.jpg
https://c1.staticflickr.com/1/760/23069428670_1ee6fb19c7_c.jpg
Also Nismo is a set of R32/S13 traction links. Used condition, minor surface rust (VERY MINOR) and some dirt here and there, nothing that coat of paint and a new sticker wouldn't fix (if it really bothers you). $80 Plus shipping.
https://c1.staticflickr.com/1/641/23282653221_6e0d223ea3_c.jpg
https://c1.staticflickr.com/1/668/23339082446_7b1a550fdd_c.jpg
https://c2.staticflickr.com/6/5735/22997285399_7a5a1ce498_c.jpg
https://c2.staticflickr.com/6/5657/22738060623_cd2c8d527f_c.jpg
Next is an S13 HUD, was bought from a member on here a year or two ago. Was advertised as in working condition. $30 plus shipping.
https://c1.staticflickr.com/1/597/22997282129_0df4bcdf51_c.jpg
https://c2.staticflickr.com/6/5829/23365205195_7c90e9e3d2_c.jpg
Now were on the rare pieces I have. Two JDM S14 HUD Clusters!
First up is just a cluster, so you will need to track down the HUD on your own. Its in great shape, AND includes all the wiring you will need to make it work! $240 Plus Shipping
https://c2.staticflickr.com/6/5818/22736831024_8a675d3f41_c.jpg
https://c2.staticflickr.com/6/5784/22738051723_fb333aabb0_c.jpg
Saved the BEST FOR LAST! A nearly complete JDM S14 HUD Set! I say nearly complete because i don't have the factory Trim piece, but it wouldn't a LHD car anyway. Clear plastic is in great shape for its age, what you see in the photos is just smudges. I can take some better pictures for any weary buyer. The whole unit itself is in fantastic condition, no broken tabs, no discoloring of the cluster, virtually flawless. Wiring pigtails are included, and the one for the HUD is uncut! $440 plus shipping.
https://c2.staticflickr.com/6/5719/22736824124_c62fd482d2_c.jpg
https://c2.staticflickr.com/6/5797/23365192555_aaa684607d_c.jpg
https://c1.staticflickr.com/1/642/23365194045_becc2e2ace_c.jpg
https://c1.staticflickr.com/1/652/22997271309_53703cef26_c.jpg
https://c2.staticflickr.com/6/5692/23069412180_6388352147_c.jpg
That's all for now, please don't hesitate to ask questions.
Thank you
-Kyle