Ls1 Wiring specialties harness s14

[laurentj23]

I bought this last year. Plugged it in the engine but project has been going south. I have decided to used Holley HP +. The harness comes with 5 wire truck maf so you don't need any provision for iat sensor. I'll also includes the 411 PCM already been flashed by vengeance racing and cam spec of tick sis stage 2 mild cam. Add 30 for shipping.


Specs:
F body engine
T56 trans
Add AC
Vortex 5 pin
EV1 injectors
No ABS
Calibration wiring

411 pcm tuning specs :Engine and Chassis info:
-----------------------
Engine: LS1 5.7L V8 from a 1999 trans am with 243 heads
Transmission: t56 from 2000 camaro 6 speed
Rear End Ratio: 3.96
Tire Height: not sure but the size for the rear is 215 45 17


Modifications:
-------------
Headers: 1 3/8 primary long tube header
Exhaust: dual 3" with x pipe cat delete to 3.5 inches muffle
Intake: Open air 3.5" with K&N Cone Filter.
Fast 92 mm Intake with nw 92 tb
Stock fuel rails with 72 lbs injectors
Aftermarket cam 226/234 .605/.612 LsA110

Feature Changes:
---------------
-Disable VATS
-Disable CAGS/Skip Shift
-Disable EVAP
-Disable Rear O2 Sensors
-Disable Speed Limiter
-Disable Oil Level Sensor
-Disable Fuel level Sensors
-Disable Fuel Tank Pressure Sensor
-PCM should never turn off car
-Manual A/C Type (only needed for certain cars)

$800

[Cisco357]

A lot of info and possibly interested but what's the price ?

[laurentj23]

A lot of info and possibly interested but what's the price ?

fixed.I just posted the price

[laurentj23]

bump. price drop to 700 shipped.