TOMEI KA24DE Turbo Kit!!!!

[tougefactory]

Hey Guys,

Tomei has finally started to release their KA24DE turbo kit! We will be stocking most of these items as they get release, so keep a eye out. Currently only the exhaust manifold is and with limited stock available these will sell quick. Feel free to contact us for pricing!!

http://www.tomeipowered.com/BTE/wp-content/uploads/2015/11/20151104_main.jpg
http://www.tomeipowered-usa.com/usa/2015enews/20151104/zentaizu.jpg

http://www.tomeipowered-usa.com/usa/2015enews/20151104/ka-exmani_tanpin.jpg
http://www.tomeipowered-usa.com/usa/2015enews/20151104/ka-exmani_flange.jpg

[tougefactory]

Call for a special Zilvia package price.

http://www.tomeipowered-usa.com/usa/2015enews/20151104/arms_sr.jpg
http://www.tomeipowered-usa.com/usa/2015enews/20151104/outletpipe_sr.jpg
http://www.tomeipowered-usa.com/usa/2015enews/20151104/muffler_sr.jpg
http://www.tomeipowered-usa.com/usa/2015enews/20151104/st-pipe_sr.jpg
http://www.tomeipowered-usa.com/usa/2015enews/20151104/ka-exmani_engine2.jpg

[hellaslows13]

can't wait to see some videos of this setup

[ZenkiKid]

There already are. Go on youtube and search them.

[tougefactory]

Got a PM from you, but your inbox is full. Make some space and I'll send you pricing!
There already are. Go on youtube and search them.

[gostrider]

how much for the kit?

[DMiller]

PM Pricing for manifold?

[sr23det]

pm me price individually for all items except turbo and elbow. assuming the sr20 turbo, elbow, dp are compatible.

[hellaslows13]

Yeah I found the videos by Tomei. Pretty cool.

https://www.youtube.com/watch?v=5iC0Ech0DSc

[beeracing s14]

Do i have to change ecu? Im still running auto ecu on 5 spd. Lol

[tougefactory]

PM's sent

beeracing, it depends on what goals you have for the car. You can get a ROM tune, or you can go as far as switching to Power FC, AEM EMS or something like that.

Again, it depends on what supporting modifications you plan on doing, as well as horsepower goals and what the car will be used for.

Feel free to contact me should you have any questions about that and I'd be happy to help you out.

[tlieberman240]

Where was this way back when I had a KA-T?!?! :(

[Gingersmurf]

Any hope for single cam ka-t stuff?

[tougefactory]

No word on any single cam stuff from Tomei at this point.

[JesusFreakDrifter]

great looking kit. I know the sr20 kit is relatively inexpensive. im happy to know these are available for when im ready

[r34sr]

Nice...but about 3 years too late.
I can't see the price being more affordable or worth while over an isis manifold and turbo.

[Z32TwinTurbo]

Nice...but about 3 years too late.
I can't see the price being more affordable or worth while over an isis manifold and turbo.

Lol you're really going to compare ISIS to tomei??:picardfp:

[royale]

Does the downpipe or elbow still need to be extended with the tomei manifold?

[r34sr]

Lol you're really going to compare ISIS to tomei??:picardfp:

http://www.ka-t.org/viewtopic.php?f=3&t=57158

Why can't i compare isis to tomei? I've been running mine for 3+ years at 280whp 340tq.

T2 setups dont flow very well on a KA after 5k rpm....they are responsive and torquey but literally choke the engine after that torque spike.

[KAT-PWR]

http://www.ka-t.org/viewtopic.php?f=3&t=57158

Why can't i compare isis to tomei? I've been running mine for 3+ years at 280whp 340tq.

T2 setups dont flow very well on a KA after 5k rpm....they are responsive and torquey but literally choke the engine after that torque spike.

Eh depends on the t2 you run, usually its the poor stock cams that cause the KA to fall off at higher rpms 5.5k+
Mine did that with a t3 50 trim, its just less noticeable because youre making more power. Switching to 264 cams will change the feel of your KA T3 or t2

[Silverbullet]

wow, only 8 years too late!

I'm sure its a fine kit though.


I wonder why they decided on a casted ex manifold rather than a tube one like the Tomei SR20 one.

[collegekid]

They should also make a oversized ka oil pan with the proper fitting for an oil line, or do their turbo not use oil and only coolant?

[spooled240]

Pm a price for the exhaust manifold plz. Thx!

[RalliartRsX]

They should also make a oversized ka oil pan with the proper fitting for an oil line, or do their turbo not use oil and only coolant?

:picardfp:

Huh??

[Srk2vane]

Could you pm price for the manifold.
Thanks you.

[Rusker]

Currently running an SR but this is great news for the 240 community.


Sent from my iPhone using Tapatalk

[RedRedWine]

Does the downpipe or elbow still need to be extended with the tomei manifold?

I would like confirmation of this as well.

[omgRWDgoodness!]

Lol you're really going to compare ISIS to tomei??:picardfp:
Aaaand this is a major factor in why I'm trying to get away from this "community"...

Have you seen Nissanparts' OEM Type-X front bumper thread? People asking about free shipping when they're selling the real thing for $200. Jesus fucking Christ.

[Razi]

Price on the manifold please!!

[SteeleBrothersDrifting_Mike]

Please PM me price for manifold and intercooler kit

[kamilitaryman]

Awesome job Tomei! I've been keeping an eye on their KA build since it was announced. Who the fk cares if it's "too late." Better late than never! I'd like to run this kit on my next KA-T build.

[KAT-PWR]

This kit is not a/c compatible?

[FaLKoN240]

Oh hell no. If you can't keep AC with this manifold I don't want it.

[tougefactory]

You should be able to run A/C with this manifold. Not sure about with the full kit yet though, as it has not been released by Tomei yet and is still in the development phase.

[royale]

You should be able to run A/C with this manifold. Not sure about with the full kit yet though, as it has not been released by Tomei yet and is still in the development phase.

Is it necessary to make a custom downpipe with this manifold or is it a direct bolt on to the turbo elbow with an sr downpipe?

[spooled240]

Is it necessary to make a custom downpipe with this manifold or is it a direct bolt on to the turbo elbow with an sr downpipe?

SR downpipe will work as noted in the second pic of the first post. Bolt this ish on and GO!

@Tougefactory: I didn't get a PM, please re-send if pricing is available. Thx!

[2.5T_/<ouki]

I think I'm gonna go with this manifold for my setup.

[KAT-PWR]

Cams are now available 270/270 9.8mm lift, work with stock valve springs

[MR209]

Hi tougefactory. I would like pricing on the Tomei Cast KA24DE Turbo Manifold. Also, has Tomei released the "Turbo Fitting Kit" or "Intercooler Piping" yet? If not, any idea of possible release dates? Thanks in advance!

[tougefactory]

PM sent!

These items are in stock ready to go! Hit us up for special pricing guys.

TF-WORKS

[Ayy_mo]

Sent you a pm 4 days ago. Still no reply

[Z_Roots]

Anyone have any links to builds for the KA Tomei Expreme setup???

[rg3777]

How can I use an after market water temp sensor if this kit uses the hose adapter?