Eddiesteez
11-04-2015, 09:05 PM
looking to trade my manual converted drift missile is300 for a 240, ae86, cressida, mk3 supra, datsun or rx7 of equal value.
So i will not trade for a stock version of the cars mentioned unless you want to put cash on topor its really special or clean.Im just looking for a nice car that i can slide. this car is used as a drift car. its completely gutted except for the stock front right passanger seat, and the bride bucket seat on the driver side. along with the bride seat comes a corbeau 6 point harness mounted on to an NRG harness bar. the car is white except for the 2 front fenders which were modified to fit the wheel and allow space for the steering angle modifications. it will come with 4 18x8.5 konig wheels. the fronts are wrapped in 245/40/18 falken aziniz RT615. its lowered on eibach lowering springs. it has modified steering knuckles and rack spacers for extra angle as well as 35mm spacers in the front. It still has the stock 2JZGE engine with an aem intake and ProTunning headers and straight piped all the way back. It was manual converted by me and while converting it i added a few things like a fidanza light weight fly wheel exedy stage 1 clutch and i ran a direct hardline from master to slave cylinder so the clutch would drop faster. I also used an mk3 supra clutch master cylinder and clutch pedal. I also had the differential welded the good way, so with the 4 corners of the inner cage welded to the gears plus the plate welded in the middle of both sides. The only reason i want to possibly trade is because i want to try something different with a bigger after market. The car performs amazingly on and off the track and is very reliable. i have had no problems with the car and ive been consistently sliding it for about a year. I keep up with the normal maintenance like all oils including differential trans and engine as well as all other fluids. For trade offers as well as any questions txt me at--- (909)242-6997 ---
So i will not trade for a stock version of the cars mentioned unless you want to put cash on topor its really special or clean.Im just looking for a nice car that i can slide. this car is used as a drift car. its completely gutted except for the stock front right passanger seat, and the bride bucket seat on the driver side. along with the bride seat comes a corbeau 6 point harness mounted on to an NRG harness bar. the car is white except for the 2 front fenders which were modified to fit the wheel and allow space for the steering angle modifications. it will come with 4 18x8.5 konig wheels. the fronts are wrapped in 245/40/18 falken aziniz RT615. its lowered on eibach lowering springs. it has modified steering knuckles and rack spacers for extra angle as well as 35mm spacers in the front. It still has the stock 2JZGE engine with an aem intake and ProTunning headers and straight piped all the way back. It was manual converted by me and while converting it i added a few things like a fidanza light weight fly wheel exedy stage 1 clutch and i ran a direct hardline from master to slave cylinder so the clutch would drop faster. I also used an mk3 supra clutch master cylinder and clutch pedal. I also had the differential welded the good way, so with the 4 corners of the inner cage welded to the gears plus the plate welded in the middle of both sides. The only reason i want to possibly trade is because i want to try something different with a bigger after market. The car performs amazingly on and off the track and is very reliable. i have had no problems with the car and ive been consistently sliding it for about a year. I keep up with the normal maintenance like all oils including differential trans and engine as well as all other fluids. For trade offers as well as any questions txt me at--- (909)242-6997 ---