nismo_bill
10-21-2015, 01:03 PM
S13 SR20DET head.
Head has been fully machined, CBN decked, valves and seats cutu.
Has Supertech valve springs, titanium retainers and Supertech valves stem seals installed (all brand new) no rockers/lifters/shims or guides installed was going to go all brand new OEM for that stuff. (will come with caps and cam gears, you'll need cap bolts though) I might have the old stuff lying around, but I work too much to look for it. It would cost you an easy $800 to build this head to these specs, let alone the cost of the original head at $300-450 for a good one.
Asking $700 picked up. NOW $500
I also have Kelford 266/270 cams BNIB. These are $570-600 new.
Asking $520 picked up. NOW $450
Also have Cosworth Headgasket. 1.1MM 87MM BORE BNIB These are $150-160 new.. best of the best for head gaskets.
Asking $130 picked up. I don't NEED to sell this, as I can easily toss it on my other SR20's if needed. NOW $100
Will sell this whole setup as a package deal for $1175 picked up. NOW $900 MY LOSS IS YOUR GAIN!
This head will be fully capable of 500+hp and 8300rpm+ with the right rockers/dual guide/oil pump set up.
Slightly negotiable on this. More negotiable if picking up, with cash. Will also trade for Work CR Kai or Rays Gram Lites. (must be nicely sized) +Cash from my end for the right set. 17/18 Staggered preferred, but will entertain 18/18 as I can use them for spares.
would also consider trades for Z33 CD0009 Transmission
Reason why I'm selling? I have a few SR20's and I plan to just make one stupid, expensive, asshole sounding one. I don't have room in storage to really order anymore parts, and I don't feel like leaving this sitting around at the shop..
http://i108.photobucket.com/albums/n21/nismo_bill/FBE15A2A-8FCE-430F-A2E9-526374DB61F9.jpg (http://s108.photobucket.com/user/nismo_bill/media/FBE15A2A-8FCE-430F-A2E9-526374DB61F9.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/A5B35302-4B0A-4674-A920-808F71AA84D0.jpg (http://s108.photobucket.com/user/nismo_bill/media/A5B35302-4B0A-4674-A920-808F71AA84D0.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/42B4EFC7-C9FD-4D01-9A80-D8E505E5DFA2.jpg (http://s108.photobucket.com/user/nismo_bill/media/42B4EFC7-C9FD-4D01-9A80-D8E505E5DFA2.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/379AF728-D7C9-430D-AF18-A0D2FD9C12B9.jpg (http://s108.photobucket.com/user/nismo_bill/media/379AF728-D7C9-430D-AF18-A0D2FD9C12B9.jpg.html)
best way to get ahold of me is to text. 517-227-244seven
My name is Billy
Head has been fully machined, CBN decked, valves and seats cutu.
Has Supertech valve springs, titanium retainers and Supertech valves stem seals installed (all brand new) no rockers/lifters/shims or guides installed was going to go all brand new OEM for that stuff. (will come with caps and cam gears, you'll need cap bolts though) I might have the old stuff lying around, but I work too much to look for it. It would cost you an easy $800 to build this head to these specs, let alone the cost of the original head at $300-450 for a good one.
Asking $700 picked up. NOW $500
I also have Kelford 266/270 cams BNIB. These are $570-600 new.
Asking $520 picked up. NOW $450
Also have Cosworth Headgasket. 1.1MM 87MM BORE BNIB These are $150-160 new.. best of the best for head gaskets.
Asking $130 picked up. I don't NEED to sell this, as I can easily toss it on my other SR20's if needed. NOW $100
Will sell this whole setup as a package deal for $1175 picked up. NOW $900 MY LOSS IS YOUR GAIN!
This head will be fully capable of 500+hp and 8300rpm+ with the right rockers/dual guide/oil pump set up.
Slightly negotiable on this. More negotiable if picking up, with cash. Will also trade for Work CR Kai or Rays Gram Lites. (must be nicely sized) +Cash from my end for the right set. 17/18 Staggered preferred, but will entertain 18/18 as I can use them for spares.
would also consider trades for Z33 CD0009 Transmission
Reason why I'm selling? I have a few SR20's and I plan to just make one stupid, expensive, asshole sounding one. I don't have room in storage to really order anymore parts, and I don't feel like leaving this sitting around at the shop..
http://i108.photobucket.com/albums/n21/nismo_bill/FBE15A2A-8FCE-430F-A2E9-526374DB61F9.jpg (http://s108.photobucket.com/user/nismo_bill/media/FBE15A2A-8FCE-430F-A2E9-526374DB61F9.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/A5B35302-4B0A-4674-A920-808F71AA84D0.jpg (http://s108.photobucket.com/user/nismo_bill/media/A5B35302-4B0A-4674-A920-808F71AA84D0.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/42B4EFC7-C9FD-4D01-9A80-D8E505E5DFA2.jpg (http://s108.photobucket.com/user/nismo_bill/media/42B4EFC7-C9FD-4D01-9A80-D8E505E5DFA2.jpg.html)
http://i108.photobucket.com/albums/n21/nismo_bill/379AF728-D7C9-430D-AF18-A0D2FD9C12B9.jpg (http://s108.photobucket.com/user/nismo_bill/media/379AF728-D7C9-430D-AF18-A0D2FD9C12B9.jpg.html)
best way to get ahold of me is to text. 517-227-244seven
My name is Billy