PDA

View Full Version : S13 ka-t. Car wont stay running


thekyroshon
10-14-2015, 03:28 PM
Ok to start out I have a ka24det. The motor has ran good ever since I've had it. One day it just took a shit and wouldn't stay running. After I started it up. I've changed maf 5 times to see if it's the problem but it's not. I unplug the maf the car will idle and rev up to 3 grand that's it. If I plug it in the car bogs and dies when plugged in. It starts and idles for 4 seconds the dies. Can't give it any gas. No vacuum leaks that I found. Maf works on other cars. Someone help.

Sent from my SM-S975L using Tapatalk

Gingersmurf
10-14-2015, 03:30 PM
Is your fuel pump dying? Might be fine when you start due the the lesser pressure but cant keep up to the idle? My ka-t had a similar sounding problem and ended up being the pump

thekyroshon
10-14-2015, 03:32 PM
Car runs and idles good and says running with maf unplugged though.

Sent from my SM-S975L using Tapatalk

thekyroshon
10-14-2015, 03:33 PM
Getting 12 volts to maf

Sent from my SM-S975L using Tapatalk

Gingersmurf
10-14-2015, 03:35 PM
What kind of ECU Tune do you have?

thekyroshon
10-14-2015, 03:37 PM
Emance

thekyroshon

thekyroshon
10-14-2015, 03:43 PM
Has 370 cc injectors from sr and t25. That's what the tune is for

thekyroshon

Gingersmurf
10-14-2015, 04:13 PM
Stock maf or Z32?

thekyroshon
10-14-2015, 04:14 PM
Stock maf or Z32?
Stock

thekyroshon

Gingersmurf
10-14-2015, 04:16 PM
I guess you have to start tracing wires and see if you have a short somewhere, or check and make sure all your plugs are plugged in all the way and not loose, i'm out of ideas... Maybe wait and see if anyone else chimes in

thekyroshon
10-14-2015, 04:21 PM
Alright thanks

thekyroshon

kruked
10-17-2015, 08:14 PM
Try running a secondary ground for the MAFS directly to the chassis.