Tein tire rods, SPL outers, lug nuts, injectors, ruca

[zainracer]

LOCATION: Collierville, TN
BEST CONTACT METHOD: PM
PAYMENT OPTIONS: Cash or Paypal
SHIPPING: At Buyers expense

ITEM: SPL S13/S14 outer tie rods
DESCRIPTION: only used for about 8K miles, switched to a different inner/outer tie rod setup for knuckles
PRICE: $165($175 shipped) SOLD
http://i1151.photobucket.com/albums/o624/ZainRacer/Parts%20For%20Sale%20Compressed/190b0e60-40de-463d-822e-1c5496cc533e_zpsio6mumpb.jpg (http://s1151.photobucket.com/user/ZainRacer/media/Parts%20For%20Sale%20Compressed/190b0e60-40de-463d-822e-1c5496cc533e_zpsio6mumpb.jpg.html)

ITEM: Inner Tie Rods
DESCRIPTION: Z33 Tein inner tie rods, only used for about 8k miles, needed longer tie rods because I got different knuckles. In very good condition.
PRICE:$60 ($70 shipped) SOLD
http://i1151.photobucket.com/albums/o624/ZainRacer/20150329_002506_zpsoylrzbs3.jpg (http://s1151.photobucket.com/user/ZainRacer/media/20150329_002506_zpsoylrzbs3.jpg.html)

ITEM: OEM S15 480cc injectors, with S15 fuel rail and FPR
DESCRIPTION: Good condition, working injectors pulled from a S15 SR20
PRICE: $100 ($115 shipped)
http://i1151.photobucket.com/albums/o624/ZainRacer/Parts%20For%20Sale%20Compressed/b2174fe1-f31d-4d34-a32a-e7fd74111529_zps4avnqvb6.jpg (http://s1151.photobucket.com/user/ZainRacer/media/Parts%20For%20Sale%20Compressed/b2174fe1-f31d-4d34-a32a-e7fd74111529_zps4avnqvb6.jpg.html)
http://i1151.photobucket.com/albums/o624/ZainRacer/Parts%20For%20Sale%20Compressed/80fca30c-1c12-462c-b773-7c127ab89477_zpss0qfrfgy.jpg (http://s1151.photobucket.com/user/ZainRacer/media/Parts%20For%20Sale%20Compressed/80fca30c-1c12-462c-b773-7c127ab89477_zpss0qfrfgy.jpg.html)

ITEM: OEM S14 SR20 370cc injectors
DESCRIPTION:working injectors pulled from a S14 SR20, some of the tips on the end are cracked/ missing the little tabs. Connectors pictured but not included.
PRICE: $80 ($90 shipped)
http://i1151.photobucket.com/albums/o624/ZainRacer/Parts%20for%20sale%20V2/SR20370ccinjectors800x600_zpse573b12b.jpg (http://s1151.photobucket.com/user/ZainRacer/media/Parts%20for%20sale%20V2/SR20370ccinjectors800x600_zpse573b12b.jpg.html)

ITEM: 2.5" I.D. springs
2x Eibach 7" long 275lb (0700.250.0275)
2x GC/Eibach 5" long, ~430 lbs (GC125.64.75)
2x GC/Eibach 8" long, ~380lbs (GC200.64.67)

PRICE: $70 shipped per pair

ITEM: S13 Rear Upper control arms
DESCRIPTION: Used, old RUCA. Will need new rod ends.
PRICE: $10 ($20 shipped)
http://i1151.photobucket.com/albums/o624/ZainRacer/Parts%20For%20Sale%20Compressed/ce6ae3d9-c0fa-4232-9a39-1a7fe890687a_zpsnyoz0iby.jpg (http://s1151.photobucket.com/user/ZainRacer/media/Parts%20For%20Sale%20Compressed/ce6ae3d9-c0fa-4232-9a39-1a7fe890687a_zpsnyoz0iby.jpg.html)

ITEM: Lug nuts
DESCRIPTION: Muteki Lug nuts, Neo chrome, being used for a while and the coating is chipping off but threads are perfect. Only have 17 so it would only work for 4 lug cars
PRICE:$20 ($30 shipped) SOLD
http://i1151.photobucket.com/albums/o624/ZainRacer/22ec36db-729e-45ca-acc3-e44cf7c2efed_zpswczxlafj.jpg (http://s1151.photobucket.com/user/ZainRacer/media/22ec36db-729e-45ca-acc3-e44cf7c2efed_zpswczxlafj.jpg.html)


ITEM: FLCA
DESCRIPTION: Godspeed FLCA. I started modifying these for roll center correction based on this write up: http://www.nissanroadracing.com/showthread.php?t=1407
I have already reamed out the bearing hole and pressed in the ABI-12T bearings. Will also include the 3/4" bolt, lock nuts, and the godspeed rod ends. I don't have the misalignment spacers for the rod ends. ( the bearings and hardware cost ~$50.
PRICE:$100 ($120 shipped)
http://i1151.photobucket.com/albums/o624/ZainRacer/3704f7f0-d7b4-4270-83d7-39026698839d_zpssvxyzwk6.jpg (http://s1151.photobucket.com/user/ZainRacer/media/3704f7f0-d7b4-4270-83d7-39026698839d_zpssvxyzwk6.jpg.html)

ITEM: Stock S13 front spindles
Price: $60 ($80 shipped)

[andisan]

To bad on the lug nuts

Looking for that finish

GLWS

[shephurd]

will the inner/outer tie rods work with +25mm flca s13

[zainracer]

will the inner/outer tie rods work with +25mm flca s13


I believe that the Z33 tie rods are a little shorter than the stock S13. The SPL outers give you extra length but I think the Z33 inner+ SPL outer might not give you a safe amount of thread engagement if you are adding 25mm to the flca. Using S14 inners with SPL outers would probably be a better option.

[zainracer]

Bump! Lug nuts sold, price lowered on everything else!

[zainracer]

SPL outer and Tein inner tie rods sold!