dluevanos01
09-22-2015, 06:19 PM
Selling these parts to fund my new engine and new aero set up.
Everything is in perfect working condition, better descriptions below.
I can be reached here via pm, or at 562-205 57five5
Prices are firm.
S13/180sx optional Nismo exhaust. $600 (not really looking to ship)
-very clean has scratches/scrapes but nothing too bad.
-I will be going lower and don't want to completely destroy it.
-Best sounding exhaust! Nismo stamped on every Flange!!
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12032410_1214190311927727_1935508649_n_zpsgydpgubj .jpg
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12048547_1214190298594395_796797555_n_zpsxjg5nklr. jpg
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12042121_1214190421927716_1172230240_n_zpsofzzc8ga .jpg
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12042075_1214190295261062_1360446433_n_zpsmnszkhdb .jpg
180sx rear valances SOLD!!!
**center piece is not pictured but it's included. Just been too lazy/been too hot to remove it**
-super clean, only blemishes on paint.
-Missing the tab on the driver side piece when I got it, I drilled out the rivets, and installed a DIY metal tab. I did not drill holes extra holes on it. Other than that all tabs are intact and sturdy.
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12048780_1214190241927734_957757861_n_zpsweffh7nz. jpg
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12047341_1214190238594401_894185664_n_zpseocfylxn. jpg
Blitz Intercooler SOLD
-Piping is marked for s14/s15 sr20 but will work with s13 with ans14/s15 engine, if using a greddy manifold on an s13 sr or by simply using a different cold pipe.
-No leaks or damage
-Blitz logo stenciled onto the core.
-Comes with 4-ply couplers and t-bolt calps.
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12025432_1214190331927725_59721375_n_zpscxgemmfy.j pg
Sr20 block, crank, upper oil pan and head. $500
-selling because I simply don't want to deal with a rebuilt/want a stock set up since I wont be doing anything but driving the car.
-lost compression (30% leak on cylinder 2 and 3 to crankcase). Rings went bad.
-No damage to the cylinder walls whatsoever.
-Crank is in percfect, no damage to journals.
-Head is perfect condition. Needs cams, vts gear/solenoid.
-Also have cp 86 mm pistons and eagle rodsvalve cover, intake, manifold, and other parts for extra cost.
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12032393_1214190268594398_896790171_n_zpsaggps97y. jpg
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12016550_1214190278594397_2045491626_n_zpsjygrsccg .jpg
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12042163_1214190261927732_2066281215_n_zpsaqqfb1ue .jpg
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12030703_1214190251927733_647517754_n_zps4bx7x4je. jpg
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12042208_1214190245261067_1465084462_n_zpsi0iflhdy .jpg
Everything is in perfect working condition, better descriptions below.
I can be reached here via pm, or at 562-205 57five5
Prices are firm.
S13/180sx optional Nismo exhaust. $600 (not really looking to ship)
-very clean has scratches/scrapes but nothing too bad.
-I will be going lower and don't want to completely destroy it.
-Best sounding exhaust! Nismo stamped on every Flange!!
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12032410_1214190311927727_1935508649_n_zpsgydpgubj .jpg
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12048547_1214190298594395_796797555_n_zpsxjg5nklr. jpg
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12042121_1214190421927716_1172230240_n_zpsofzzc8ga .jpg
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12042075_1214190295261062_1360446433_n_zpsmnszkhdb .jpg
180sx rear valances SOLD!!!
**center piece is not pictured but it's included. Just been too lazy/been too hot to remove it**
-super clean, only blemishes on paint.
-Missing the tab on the driver side piece when I got it, I drilled out the rivets, and installed a DIY metal tab. I did not drill holes extra holes on it. Other than that all tabs are intact and sturdy.
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12048780_1214190241927734_957757861_n_zpsweffh7nz. jpg
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12047341_1214190238594401_894185664_n_zpseocfylxn. jpg
Blitz Intercooler SOLD
-Piping is marked for s14/s15 sr20 but will work with s13 with ans14/s15 engine, if using a greddy manifold on an s13 sr or by simply using a different cold pipe.
-No leaks or damage
-Blitz logo stenciled onto the core.
-Comes with 4-ply couplers and t-bolt calps.
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12025432_1214190331927725_59721375_n_zpscxgemmfy.j pg
Sr20 block, crank, upper oil pan and head. $500
-selling because I simply don't want to deal with a rebuilt/want a stock set up since I wont be doing anything but driving the car.
-lost compression (30% leak on cylinder 2 and 3 to crankcase). Rings went bad.
-No damage to the cylinder walls whatsoever.
-Crank is in percfect, no damage to journals.
-Head is perfect condition. Needs cams, vts gear/solenoid.
-Also have cp 86 mm pistons and eagle rodsvalve cover, intake, manifold, and other parts for extra cost.
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12032393_1214190268594398_896790171_n_zpsaggps97y. jpg
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12016550_1214190278594397_2045491626_n_zpsjygrsccg .jpg
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12042163_1214190261927732_2066281215_n_zpsaqqfb1ue .jpg
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12030703_1214190251927733_647517754_n_zps4bx7x4je. jpg
http://i1061.photobucket.com/albums/t473/s13sr20detblktp/12042208_1214190245261067_1465084462_n_zpsi0iflhdy .jpg