PDA

View Full Version : VA FS: APEXi copy? SR20det intake suction pipe


kota2240
09-12-2015, 07:28 AM
sold...............

Cold air intake probably a copy. Slightly different than the APEXi and I dont think K&N made one but none the less it is a good price. Looks like the lettering was polished off.

Will come with everything pictured.
Inlet coupler to the turbo is 2.5in
MAF coupler is 2.5in and 3in

http://i197.photobucket.com/albums/aa57/kota2240/20150909_183706_zpskaxriepd.jpg
http://i197.photobucket.com/albums/aa57/kota2240/20150909_183646_zpsejt5pwov.jpg

FaLKoN240
09-12-2015, 08:18 AM
Which MAF is this supposed to work with?

kota2240
09-12-2015, 08:44 AM
i used it with a z32 with the flange cut off. many different ways you can set this up with. 2.5 would be the oem maf.

FaLKoN240
09-12-2015, 10:11 AM
I have a 300zx maf which is why I'm asking.

So this will work with a 300zx maf on an s13/14 SR set up with which turbo??

kota2240
09-12-2015, 04:25 PM
i used clocking adapters and attached the oem t28 curved inlet to it

5280VertDET
09-12-2015, 08:10 PM
I have a 300zx maf which is why I'm asking.

So this will work with a 300zx maf on an s13/14 SR set up with which turbo??

The MAF shouldn't be what you're worried about. The Turbo inlet is, this is designed to work only with stock inlet placement.

Have one sitting on my shelf unuseable due to the inlet on my turbo. :picardfp:

kota2240
09-16-2015, 05:12 PM
sold.............