FS: 2JZ-GTE Power FC (AP Engineering)

[Ninjabread]

Hey guys,

Upgraded to a standalone so I no longer need this power FC. It's a rare unit, and I bought it from Ryan Tuerck 4 years ago. Very hard to find these now and they are nice since they are PnP.

It comes with the commander, and a 3bar map sensor kit. This ecu will work for non-vvti 2jz, as well as non-vvti 1jz with minor wiring mods. The instructions will be included with the ECU.

If it makes any difference, the current tune is for 1jz/sard850cc/precision6262/26psi Made 513hp/485tq on a dynapack

NEW PRICE Asking $1050 shipped anywhere in the world.

Currently located in Ontario, Canada.

Cheers.

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/11990518_10206443367756778_1767697366054388165_n.j pg?oh=0fb9baada708e51149a278daf51a0a92&oe=5668836B

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/12002150_10206443368316792_1283338509784369398_n.j pg?oh=8301d75bc5634a77190f7af254c68572&oe=566ABDBF

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xtp1/v/t1.0-9/11988396_10206443368436795_8576821300730319888_n.j pg?oh=84d0544828bd6094febf121d3499d581&oe=5668359D

[efrain_n7]

Post a pic of the ecu plug. JZA80/JZS147 and JZX90/100 use completely different ecu plugs.

[Ninjabread]

This has jzx90/soarer plugs. I do have all the plugs if any buyer would want them to re-pin their US harness. I know there is also an adapter harness to plug into a us 2jz.

[eDmSiL80]

Holycow much rare much want. Can you get more of these if this one sells? Also, where's your chaser been dude!

[Ninjabread]

Not sure if they still make it... and yes its pretty rare!

Jzx90 has been good! Just slow progress this year.

[eDmSiL80]

wish this was being sold later :-/ bout to pick up a 1jz sc300 and this would of been perfect haha

I use to drive at clubloose when you and mats first came out. Hope all is well!

[Ninjabread]

Oh nice! Ya I haven't been to e town in 3 years and I REALLY miss it! Can't wait to go back and shred there.

[efrain_n7]

This has jzx90/soarer plugs. I do have all the plugs if any buyer would want them to re-pin their US harness. I know there is also an adapter harness to plug into a us 2jz.
Gotcha.
You can't just swap plugs, the pins on the jzz30/jzx90/100 are a different size from the jza80/jzs147, they would have to cut and repin the harness in order for it to work.
This ECU setup was originally sold with the 2jz jumper harness from AP Engineering. It is disco'd as well.


Super rare ecu none the less, Apexi discontinued it about 10 years ago. Perfect for any JZX90 non-vvti 1j guys.

[Ninjabread]

Ahhhh OK good to know!

Well I suppose this is good for anyone with soarer/jzx90 1jz/harness. You do have to add 3 wires since this converts from batch fire to sequential.

[Ninjabread]

Bump, 1050$ Shipped anywhere!