racepar1
09-05-2015, 12:09 PM
SOHC Injen intake
This is a COMPLETE Injen intake system for a SOHC KA. EVERYTHING you need is included, just bolt it in and go. Also included is a custom bracket if you do not have the stock fan shroud. You would need to get a rubber mounting bushing or put together a spacer arrangement to mount the bracket though as I re-used the mount bushing on my dualcam intake.
SOLD!
Cone filter w/MAF adapter
This is a K&N style oiled air filter with the MAF adapter for ANY S13 with a stock MAF sensor. The filter is pretty dirty and needs to be cleaned and oiled, but is in good shape, no damage. The adapter is good quality cast aluminum and has the port for the air injection, if you wanted to keep that. It does not have the port for the intake temp sensor, so it's not quite right for a SOHC KA.
SOLD!
S13 RSR 3" EX-Mag GT2 exhaust
This is a S13 RSR 3" EX-Mag GT2 catback exhaust. The exhaust is in good shape overall. Only minor scrapes and a couple minor dents. The center exhaust bracket is bent though. It could be straightened pretty easily, or you could just cut it off as it's not necessary.
$200
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3072_zpsfik3nnqe.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3074_zpsohlmn6kv.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3073_zpshatpnj3h.jpg
This is a COMPLETE Injen intake system for a SOHC KA. EVERYTHING you need is included, just bolt it in and go. Also included is a custom bracket if you do not have the stock fan shroud. You would need to get a rubber mounting bushing or put together a spacer arrangement to mount the bracket though as I re-used the mount bushing on my dualcam intake.
SOLD!
Cone filter w/MAF adapter
This is a K&N style oiled air filter with the MAF adapter for ANY S13 with a stock MAF sensor. The filter is pretty dirty and needs to be cleaned and oiled, but is in good shape, no damage. The adapter is good quality cast aluminum and has the port for the air injection, if you wanted to keep that. It does not have the port for the intake temp sensor, so it's not quite right for a SOHC KA.
SOLD!
S13 RSR 3" EX-Mag GT2 exhaust
This is a S13 RSR 3" EX-Mag GT2 catback exhaust. The exhaust is in good shape overall. Only minor scrapes and a couple minor dents. The center exhaust bracket is bent though. It could be straightened pretty easily, or you could just cut it off as it's not necessary.
$200
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3072_zpsfik3nnqe.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3074_zpsohlmn6kv.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3073_zpshatpnj3h.jpg