15mm & 30mm wheel spacers, weds aluminum lugnuts

[racepar1]

PBM 15mm spacers
This is a pair of 15mm PBM 5x114.3 spacers. The spacers are bolt-on, but the studs are missing. They can be used as slip-on spacers with long wheel studs or you could get some studs for them and bolt them on. The wheel studs are the stock S13 size.
SOLD...



30mm 5x114.3 bolt-on spacers
This is a pair of 5x114.3 30mm bolt-on wheel spacers. The spacers are in good shape, no damage, all the studs are good. A couple of the short lugnuts are missing so you'll have to source them.

$40

http://i275.photobucket.com/albums/jj283/racepar1/DSCN3055_zpsvxhrhmof.jpg



Weds aluminum lugnuts
This is a set of 16 Weds blue anodized aluminum lugnuts. 12 regular hex nuts, 4 lock nuts. This set is INCOMPLETE as I do NOT have the lock key for them. These would be good for spares or to complete another incomplete set.

$20

http://i275.photobucket.com/albums/jj283/racepar1/DSCN3054_zpst7zhnft9.jpg

[racepar1]

Bump........

[racepar1]

Bump........

[StuckeyOG]

Will either of these spacers fit 5x114.3 ARP studs on my S14? (12x1.5 thread pitch instead of 12x1.25)

Just found out I can't put my center caps on my Works, unfortunately. Studs extend past the wheel face so I'm going to attempt spacing them out.

Also, live in Woodland Hills so picking up will be no problem

[racepar1]

Will either of these spacers fit 5x114.3 ARP studs on my S14? (12x1.5 thread pitch instead of 12x1.25)

Just found out I can't put my center caps on my Works, unfortunately. Studs extend past the wheel face so I'm going to attempt spacing them out.

Also, live in Woodland Hills so picking up will be no problem

The thread pitch doesn't matter as you would be using them a slip-on spacers. The 15mm spacers would definitely work, but the 30mm spacers might be too thick for the studs. Measure how much thread you have sticking past the lugnuts and we should be able to figure it out.

[StuckeyOG]

I'm not really able to see how much thread is sticking out, as I have the extended Muteki SR48 lugnuts. All I'm able to see is around half an inch of the rounded end bit of the stud, sticking past the end of the lugs. But I'm sure they have a good bit of threads to spare, as it takes a while to thread on. I probably should have got the short open ended ones, lesson learned I suppose.

Anyhow, I'll take them off your hands either way. Worst case scenario I'll have a pair of spacers sitting, in case a friend needs to borrow some.

PMd you my number

[Cannonblaster]

805-861-8912 Tex me about spacers

[racepar1]

Bump, 15mm spacers pending sale...

[StuckeyOG]

Never got back to me man!
No worries though, good luck selling the rest of the stuff

[racepar1]

Never got back to me man!
No worries though, good luck selling the rest of the stuff

Sorry man, I've actually gotta hold on to the spacers for a bit. I might need them...

[StuckeyOG]

Sorry man, I've actually gotta hold on to the spacers for a bit. I might need them...

Don't sweat it man, I actually broke my wrist 2 days ago so the money is going in my doctor's pocket now lol. Works out for the better I guess! :bigok:

[racepar1]

Don't sweat it man, I actually broke my wrist 2 days ago so the money is going in my doctor's pocket now lol. Works out for the better I guess! :bigok:

Yeah, I guess wheel spacers aren't going to do much good if you can't put them on because your wrist is broken...

[Calebq69]

Please text me. I'll buy the spacers and lugs 562 879 9093