tunermt
09-04-2015, 01:58 AM
Went to Seoul/Incheon last month to tune a couple cars, long story short the S15 wasn't ready so i spent a week fabricating some exhaust and then putting it all together :P
S15 Silvia Power FC speed density tuned with Datalogit
stock bore CP pistons (stock compression)
manley H beam
ACL bearing WPC coated
264 cams (need to be changed to 272 or 280* easily another 50 HP)
Velocity Element Vband manifold (http://brewedmotors.com/velocity-element) with Tial MVR
GTX3582R .63ar turbine (small for this size turbine wheel)
stock intake manifold (30-40 HP available with Velocity Element intake manifold)
R34 GTR HKS Fcon
The owner of the car said the motor had forged pistons and the turbos were supposed to be Nismo units. With out any way to get the proper history of the car I pulled the injectors to check the part # and re gaped the spark plugs before doing a boost leak test. Unfortunately the injectors were only 555cc so i knew we would be limited on how much boost I could get before maxing out the injector duty cycle.
Check out the full article for all the details, more pictures and videos of the cars in action. brewedmotors-twin-turbo-r34-gtr-vs-s15-gtx35-30psi-nitrous (http://brewedmotors.com/blog/twin-turbo-r34-gtr-vs-s15-gtx35-30psi-nitrous)
Video of the S15 on the Dyno ***I did not love the fact the dyno room was serving as a giant EGR system... Not safe at all.***
watch?v=ukGflhuXhbM
S15 Silvia Power FC speed density tuned with Datalogit
stock bore CP pistons (stock compression)
manley H beam
ACL bearing WPC coated
264 cams (need to be changed to 272 or 280* easily another 50 HP)
Velocity Element Vband manifold (http://brewedmotors.com/velocity-element) with Tial MVR
GTX3582R .63ar turbine (small for this size turbine wheel)
stock intake manifold (30-40 HP available with Velocity Element intake manifold)
R34 GTR HKS Fcon
The owner of the car said the motor had forged pistons and the turbos were supposed to be Nismo units. With out any way to get the proper history of the car I pulled the injectors to check the part # and re gaped the spark plugs before doing a boost leak test. Unfortunately the injectors were only 555cc so i knew we would be limited on how much boost I could get before maxing out the injector duty cycle.
Check out the full article for all the details, more pictures and videos of the cars in action. brewedmotors-twin-turbo-r34-gtr-vs-s15-gtx35-30psi-nitrous (http://brewedmotors.com/blog/twin-turbo-r34-gtr-vs-s15-gtx35-30psi-nitrous)
Video of the S15 on the Dyno ***I did not love the fact the dyno room was serving as a giant EGR system... Not safe at all.***
watch?v=ukGflhuXhbM