R33 calipers complete set (rebuilt)

[rob_240]

set of rebuilt with new pads and hardware of R33 calipers. high temp candy red, has some nics on them. 500$ for the set. dont want to seperate them either. can reach me at 714 260 1467 for any other info. locals get priority.

[Agamemnon]

Yikes! If skyline calipers have gone up in price this much, I should start thing about selling my gtr calipers.

[rob_240]

Yikes! If skyline calipers have gone up in price this much, I should start thing about selling my gtr calipers.

really dont see where your coming from with that,z32 calipers rebuilt and complete are nearly going for that much. i referenced off a few of them for sale on here as well and they were only fronts and being sold for 250.

[rbpwrd240]

Not realy sure of either of yalls points.

R33 Calipers are GTR Calipers of the R33 Spec arent they? Maybe the GTR had a slightly larger rotor but both are 4 piston fronts and chances are your probably not using enough of the brakes to see the difference in the larger rotor. And Z32 Calipers are always more for the fronts then the rears. Hell you get twice the pistons? Your set will probably hang around for a while at this price. GLWS.

I have zeen Z32 sets go as low as 250 front and rear for just the calipers... And yes Iv seen people ask 500 for a set but never seen one sell at that price.....

[rob_240]

Not realy sure of either of yalls points.

R33 Calipers are GTR Calipers of the R33 Spec arent they? Maybe the GTR had a slightly larger rotor but both are 4 piston fronts and chances are your probably not using enough of the brakes to see the difference in the larger rotor. And Z32 Calipers are always more for the fronts then the rears. Hell you get twice the pistons? Your set will probably hang around for a while at this price. GLWS.

I have zeen Z32 sets go as low as 250 front and rear for just the calipers... And yes Iv seen people ask 500 for a set but never seen one sell at that price.....


:ugh:not really sure you got what i was talking about either i referenced "r33" calipers for sale on here... thanks for the lesson on calipers as well. not all r33 calipers are the same, and have different "specs" you have seen z32 sets.. not R33 sets, almost similar but not. hard for you to know what they sold for unless your the one that bought them.

[rbpwrd240]

:ugh:not really sure you got what i was talking about either Im sure I didnt I started my last post with that fact. i referenced "r33" calipers for sale on here... thanks for the lesson on calipers as well. not all r33 calipers are the same, and have different "specs" you have seen z32 sets.. not R33 sets, almost similar but not. hard for you to know what they sold for unless your the one that bought them.

Or sold them.... I have basterdized several Z32's and sold several sets.... I was being nice..... But since you were defensive while lacking the info that clarified your point I went and got it for you.

R32 T : 280mm x 26mm (single pot sumitomo caliper)
R32 GTS-T (early) : 280mm x 26mm (single pot sumitomo caliper)
R32 GTS-T type m : 280mm x 30mm (4 pot sumitomo caliper)
R32 GTR : 296mm x 32mm (4 pot sumitomo caliper)
R32 GTR VSPEC : 324mm x 30mm (4 pot brembo caliper)
R33 GTS-25 : 280mm x 26mm (single pot sumitomo caliper)
R33 GTS-4 : 280mm x 26mm (single pot sumitomo caliper)
R33 GTS-25T : 296mm x 30mm (4 pot sumitomo caliper)
R33 GTR : 324mm x 32mm (4 pot brembo caliper)
R33 GTR VSPEC : 324mm x 30mm (4 pot brembo caliper)
R34 GT : 296mm x 30mm (4 pot sumitomo caliper)
R34 GTT : 310mm x 30mm (4 pot sumitomo caliper)
R34 GTR : 324mm x 32mm (4 pot brembo caliper)
Z33 NA : 324mm x 32mm (4 pot brembo caliper)
Z32 NA : 280mm x 26mm (4 pot sumitomo caliper)
Z32 TT : 280mm x 30mm (4 pot ali sumitomo caliper)
S14, S15 : 280mm x 30mm (4 pot sumitomo caliper)

So what are the differences in R33 calipers and which are these. Explain to me the difference and why yours are wroth 500 bucks versus Z32 calipers that can go for as little as 250 for a whole set......... Little tip look forward to arguing the difference 16mm makes on brakes that will already lock up a hoosier and both made by sumitomo. If these were brembos it would be a different story.....

[ikennrockdis]

bump. i got my full set of r33 calipers fully rebuilt for $400. GLWS.

[rob_240]

Or sold them.... I have basterdized several Z32's and sold several sets.... I was being nice..... But since you were defensive while lacking the info that clarified your point I went and got it for you.

R32 T : 280mm x 26mm (single pot sumitomo caliper)
R32 GTS-T (early) : 280mm x 26mm (single pot sumitomo caliper)
R32 GTS-T type m : 280mm x 30mm (4 pot sumitomo caliper)
R32 GTR : 296mm x 32mm (4 pot sumitomo caliper)
R32 GTR VSPEC : 324mm x 30mm (4 pot brembo caliper)
R33 GTS-25 : 280mm x 26mm (single pot sumitomo caliper)
R33 GTS-4 : 280mm x 26mm (single pot sumitomo caliper)
R33 GTS-25T : 296mm x 30mm (4 pot sumitomo caliper)
R33 GTR : 324mm x 32mm (4 pot brembo caliper)
R33 GTR VSPEC : 324mm x 30mm (4 pot brembo caliper)
R34 GT : 296mm x 30mm (4 pot sumitomo caliper)
R34 GTT : 310mm x 30mm (4 pot sumitomo caliper)
R34 GTR : 324mm x 32mm (4 pot brembo caliper)
Z33 NA : 324mm x 32mm (4 pot brembo caliper)
Z32 NA : 280mm x 26mm (4 pot sumitomo caliper)
Z32 TT : 280mm x 30mm (4 pot ali sumitomo caliper)
S14, S15 : 280mm x 30mm (4 pot sumitomo caliper)

So what are the differences in R33 calipers and which are these. Explain to me the difference and why yours are wroth 500 bucks versus Z32 calipers that can go for as little as 250 for a whole set......... Little tip look forward to arguing the difference 16mm makes on brakes that will already lock up a hoosier and both made by sumitomo. If these were brembos it would be a different story.....


you just explained exactly what i was saying to you in the first place, not the "same" r33 uses a larger rotor. not bothering arguing stopping power with you. different reasons and different opinions on what calipers to put on ones car. whether its looks or performance there not the "same" why your arguing specs with me i have no idea. thats besides your original lame ass complaint.. that 500 is too much in your opinion. unless your buying then keep your lame ass comments to yourself i see no "firm price" on the post, unless your buying.... :fawkd: off and find a other z to "basterdized"

[rob_240]

bump. i got my full set of r33 calipers fully rebuilt for $400. GLWS.

:eek2: .........

[ikennrockdis]

just my opinion. it is possible to sell it for your price if the demand is there, but theres always the alternative of z32 calipers. these would sell for $500 shipped, or for $450.

[rob_240]

just my opinion. it is possible to sell it for your price if the demand is there, but theres always the alternative of z32 calipers. these would sell for $500 shipped, or for $450.

Thank you....

[rob_240]

bump.........

[rob_240]

bump number 2