racepar1
08-24-2015, 10:04 PM
SOHC Injen intake
This is a COMPLETE Injen intake system for a SOHC KA. EVERYTHING you need is included, just bolt it in and go. Also included is a custom bracket if you do not have the stock fan shroud. You would need to get a rubber mounting bushing or put together a spacer arrangement to mount the bracket though as I re-used the mount bushing on my dualcam intake.
$60
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2932_zpsuw30ukbj.jpg
KADE Unorthodox Racing pulley w/belts
This is an Unorthodox Racing crank pulley for any DUALCAM KA. The pulley's in great shape, it's just too aggressive for my car. Also included are the alternator and power steering belts, which are shorter than the stock belts. The belts are nearly new gates belts, only used for 1-2K miles. The pulley has a steel sleeve around where the crank seal rides so it won't wear and leak. The pulley has been painted black, originally silver.
SOLD!
Cone filter w/MAF adapter
This is a K&N style oiled air filter with the MAF adapter for ANY S13 with a stock MAF sensor. The filter is pretty dirty and needs to be cleaned and oiled, but is in good shape, no damage. The adapter is good quality cast aluminum and has the port for the air injection, if you wanted to keep that. It does not have the port for the intake temp sensor, so it's not quite right for a SOHC KA.
$20
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2853_zps5qeo9b7a.jpg
SOHC TPS
This is a TPS sensor off a SOHC KA. The sensor was replaced only a year or two ago and it is an OE sensor.
SOLD!
S13 GP Sports style sideskirts
This is a pair of KNOCKOFF GP Sports S13 sideskirts. The skirts have never been mounted. One skirt was slightly damaged while in storage.
$40
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3067_zpsnjc9kgg0.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3068_zpsnfjpg5fv.jpg
S13 Silvia front bumper
This is a complete S13 silvia front bumper with the foam, lights, and all brackets. The bumper is scuffed up and the paint is peeling, but it is not cracked or warped and the scuffs are not deep. All in all it's a pretty clean bumper.
$75
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3063_zpsnxts4jnm.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3064_zpsjg1vieml.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3066_zpslf4ccogk.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3065_zpsrlsr3asd.jpg
S13 Silvia triple projector headlights
This is a pair of S13 Silvia triple projector headlights. The lenses are clean and they have no broken tabs. One light is complete, including the subharness, which is rare anymore. The other light is missing the harness and a couple of the boots for the lights. The boots and clips are not very hard to source.
$180
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3061_zps4oi3ynbk.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3062_zpsivoyhsam.jpg
S13/14/15 passenger's side Buddy Club seat rail
This is a Buddy Club super low seat rail for any S-chasis. This is the PASSENGER'S SIDE and is for a side-mount seat. The rail is in good shape, no issues.
$75
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3058_zpscy5fktkw.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3059_zpsngf1jpff.jpg
Weds aluminum lugnuts
This is a set of 16 Weds blue anodized aluminum lugnuts. 12 regular hex nuts, 4 lock nuts. This set is INCOMPLETE as I do NOT have the lock key for them. These would be good for spares or to complete another incomplete set.
$20
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3054_zpst7zhnft9.jpg
30mm 5x114.3 bolt-on spacers
This is a pair of 5x114.3 30mm bolt-on wheel spacers. The spacers are in good shape, no damage, all the studs are good. A couple of the short lugnuts are missing so you'll have to source them.
$40
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3055_zpsvxhrhmof.jpg
MOMO Corse horn button
This is an AUTHENTIC MOMO Corse horn button. The button is is good shape, only very minor scuffing on the face.
$30
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3104_zpsmapn74br.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3053_zpsnh8zu8tv.jpg
Craftsquare style mirrors
This is a pair of BRAND NEW Craftsquare style knockoff mirrors. The mirrors are REAL carbon fiber and are in BRAND NEW condition. All hardware and the allen wrenches that came with them are included.
SOLD!
Blitz BOV W/pipe
This is a used, 100% authentic Blitz BOV with the hotpipe adapter. It's in good shape, no issues. Just bolt it on and go!
SOLD!
180sx quarter windows
This is a set of 180sx quarter windows. The glass is in good shape, co cracks, chips, or pitting. No rubber trim on the windows so you'll have to re-use yours.
$100
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3075_zps7pn8p09h.jpg
RSR 3" exhaust
This is a RSR 3" catback exhaust, I forget the model name. The exhaust is in good shape overall. Only minor scrapes and a couple minor dents. The center exhaust bracket is bent though. It could be straightened pretty easily, or you could just cut it off as it's not necessary.
$200
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3072_zpsfik3nnqe.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3074_zpsohlmn6kv.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3073_zpshatpnj3h.jpg
PBM 15mm spacers
This is a pair of 15mm PBM 5x114.3 spacers. The spacers are bolt-on, but the studs are missing. They can be used as slip-on spacers with long wheel studs or you could get some studs for them and bolt them on. The wheel studs are the stock S13 size.
$25
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3098_zpsqagp3qkv.jpg
This is a COMPLETE Injen intake system for a SOHC KA. EVERYTHING you need is included, just bolt it in and go. Also included is a custom bracket if you do not have the stock fan shroud. You would need to get a rubber mounting bushing or put together a spacer arrangement to mount the bracket though as I re-used the mount bushing on my dualcam intake.
$60
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2932_zpsuw30ukbj.jpg
KADE Unorthodox Racing pulley w/belts
This is an Unorthodox Racing crank pulley for any DUALCAM KA. The pulley's in great shape, it's just too aggressive for my car. Also included are the alternator and power steering belts, which are shorter than the stock belts. The belts are nearly new gates belts, only used for 1-2K miles. The pulley has a steel sleeve around where the crank seal rides so it won't wear and leak. The pulley has been painted black, originally silver.
SOLD!
Cone filter w/MAF adapter
This is a K&N style oiled air filter with the MAF adapter for ANY S13 with a stock MAF sensor. The filter is pretty dirty and needs to be cleaned and oiled, but is in good shape, no damage. The adapter is good quality cast aluminum and has the port for the air injection, if you wanted to keep that. It does not have the port for the intake temp sensor, so it's not quite right for a SOHC KA.
$20
http://i275.photobucket.com/albums/jj283/racepar1/DSCN2853_zps5qeo9b7a.jpg
SOHC TPS
This is a TPS sensor off a SOHC KA. The sensor was replaced only a year or two ago and it is an OE sensor.
SOLD!
S13 GP Sports style sideskirts
This is a pair of KNOCKOFF GP Sports S13 sideskirts. The skirts have never been mounted. One skirt was slightly damaged while in storage.
$40
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3067_zpsnjc9kgg0.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3068_zpsnfjpg5fv.jpg
S13 Silvia front bumper
This is a complete S13 silvia front bumper with the foam, lights, and all brackets. The bumper is scuffed up and the paint is peeling, but it is not cracked or warped and the scuffs are not deep. All in all it's a pretty clean bumper.
$75
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3063_zpsnxts4jnm.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3064_zpsjg1vieml.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3066_zpslf4ccogk.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3065_zpsrlsr3asd.jpg
S13 Silvia triple projector headlights
This is a pair of S13 Silvia triple projector headlights. The lenses are clean and they have no broken tabs. One light is complete, including the subharness, which is rare anymore. The other light is missing the harness and a couple of the boots for the lights. The boots and clips are not very hard to source.
$180
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3061_zps4oi3ynbk.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3062_zpsivoyhsam.jpg
S13/14/15 passenger's side Buddy Club seat rail
This is a Buddy Club super low seat rail for any S-chasis. This is the PASSENGER'S SIDE and is for a side-mount seat. The rail is in good shape, no issues.
$75
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3058_zpscy5fktkw.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3059_zpsngf1jpff.jpg
Weds aluminum lugnuts
This is a set of 16 Weds blue anodized aluminum lugnuts. 12 regular hex nuts, 4 lock nuts. This set is INCOMPLETE as I do NOT have the lock key for them. These would be good for spares or to complete another incomplete set.
$20
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3054_zpst7zhnft9.jpg
30mm 5x114.3 bolt-on spacers
This is a pair of 5x114.3 30mm bolt-on wheel spacers. The spacers are in good shape, no damage, all the studs are good. A couple of the short lugnuts are missing so you'll have to source them.
$40
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3055_zpsvxhrhmof.jpg
MOMO Corse horn button
This is an AUTHENTIC MOMO Corse horn button. The button is is good shape, only very minor scuffing on the face.
$30
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3104_zpsmapn74br.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3053_zpsnh8zu8tv.jpg
Craftsquare style mirrors
This is a pair of BRAND NEW Craftsquare style knockoff mirrors. The mirrors are REAL carbon fiber and are in BRAND NEW condition. All hardware and the allen wrenches that came with them are included.
SOLD!
Blitz BOV W/pipe
This is a used, 100% authentic Blitz BOV with the hotpipe adapter. It's in good shape, no issues. Just bolt it on and go!
SOLD!
180sx quarter windows
This is a set of 180sx quarter windows. The glass is in good shape, co cracks, chips, or pitting. No rubber trim on the windows so you'll have to re-use yours.
$100
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3075_zps7pn8p09h.jpg
RSR 3" exhaust
This is a RSR 3" catback exhaust, I forget the model name. The exhaust is in good shape overall. Only minor scrapes and a couple minor dents. The center exhaust bracket is bent though. It could be straightened pretty easily, or you could just cut it off as it's not necessary.
$200
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3072_zpsfik3nnqe.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3074_zpsohlmn6kv.jpg
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3073_zpshatpnj3h.jpg
PBM 15mm spacers
This is a pair of 15mm PBM 5x114.3 spacers. The spacers are bolt-on, but the studs are missing. They can be used as slip-on spacers with long wheel studs or you could get some studs for them and bolt them on. The wheel studs are the stock S13 size.
$25
http://i275.photobucket.com/albums/jj283/racepar1/DSCN3098_zpsqagp3qkv.jpg