HOLSET HY35 turbo for sale with downpipe

[brndck]

SOLD SOLD SOLD SOLD


Up for sale is a used Holset HY35 turbo. It is in very good condition with no excess play in the shaft. This turbo made 430hp/350ftlbs on my sr20vet at 18psi ( i will post the dyno chart as soon as i can find it)
https://farm6.staticflickr.com/5757/20205032013_59491475aa.jpg
https://farm1.staticflickr.com/636/20637974818_0befa6714a.jpg
https://farm1.staticflickr.com/721/20639220489_a9d32b6376.jpg
https://farm1.staticflickr.com/700/20833048391_b1ac9ed3b8.jpg
https://farm1.staticflickr.com/687/20825980155_934c2a0e15.jpg
https://farm1.staticflickr.com/591/20816477942_30a8ffe5ba.jpg

it is originally internal wastegate but the flapper is welded shut.

comes with a matching downpipe (o2 sensor not included)

$450 picked up for the turbo and downpipe (manifold, tial W/G, etc NOT INCLUDED, NOT FOR SALE)

562 519 5577
Tyler

[lgsr20swap]

Hey I have the same turbo and getting ready to plumb it. What fitting did u use for oil supply?

Sent from my SM-N915V using Tapatalk

[brndck]

Hey I have the same turbo and getting ready to plumb it. What fitting did u use for oil supply?

Sent from my SM-N915V using Tapatalk

i'll check after work and let you know!

[fullthrottle]

Those are really good numbers. I made 333whp 280tq at 15psi on a stock s14 sr20. Im currently running 20psi And figure I have to be damn close to 400whp. Stock cams are killing me.

[brndck]

86707
This is the oil feed line. I'll include both this and the drain line with the turbo


Sent from my iPhone using Tapatalk

[brndck]

Hey I have the same turbo and getting ready to plumb it. What fitting did u use for oil supply?

Sent from my SM-N915V using Tapatalk
see pix
Those are really good numbers. I made 333whp 280tq at 15psi on a stock s14 sr20. Im currently running 20psi And figure I have to be damn close to 400whp. Stock cams are killing me.

yeah mine is on an sr20vet though, so a bit different numbers are to be expected

[lgsr20swap]

Yea I see pic but we're did u get it or what r the sizes. I'm going crazy looking for it

Sent from my SM-N915V using Tapatalk

[brndck]

Yea I see pic but we're did u get it or what r the sizes. I'm going crazy looking for it

Sent from my SM-N915V using Tapatalk

it came with the engine when i bought it, the size is HY35

[mogli9000]

BuMpZ 4 Ma BoYy Tyler-40oz

[brndck]

bump still have this

[outlawstar1023]

It's probably a 12mm X 1.5 fitting. If not, you can always disassemble the housing and tap it with a 1/4 NPT fitting.

[outlawstar1023]

Hey I have the same turbo and getting ready to plumb it. What fitting did u use for oil supply?

Sent from my SM-N915V using Tapatalk

It's probably a 12mm X 1.5 fitting. If not, you can always disassemble the housing and tap it with a 1/4 NPT fitting.

[brndck]

bump again still have this.

[Detheroni]

im interested would you ship to torrance california? also is the downpipe only for SR or would it work with an RB as well??

[brndck]

im interested would you ship to torrance california? also is the downpipe only for SR or would it work with an RB as well??

um i work in paramount, and i'm in gardena all the time. i can meet up with you . the downpipe should work with SR or RB.

[niSm095]

What is the powerband like with this? I'd be interested if it's a responsive unit

[brndck]

What is the powerband like with this? I'd be interested if it's a responsive unit

It's a diesel turbo. They're designed to spool on an engine that typically only revs to 4k. They spool pretty quickly. I found the Dyno chart for my engine, I'll post it tomorrow.

[brndck]

finally remembered to take a photo of this.


https://scontent-sjc2-1.xx.fbcdn.net/hphotos-xpt1/v/t1.0-9/s720x720/12141736_10153004119041595_8753201989446282825_n.j pg?oh=d3fb4391fd67bb56333e67df4c7f85b9&oe=56C8DFB0