View Full Version : anyone else running L2 quick release??
sideviewcivic
08-25-2004, 01:11 PM
Im running the L2 quick-release/spacer and the horn fuction isnt working i notice the momo horn button has 2 male connectors as the ground and constant power. Since my L2 didnt come with instructions for hooking up the horn function(recieved it as a gift). Could anyone send me an e-mail or post a pic or 2 of the connectors they have setup for the horn to work. Living in so cal with jackasses i need the use of a horn or else imma start using the glock as my horn. :duh:
drift into a curb
08-25-2004, 01:32 PM
http://importnut.net/steeringswap.htm
This should have the procedure for wiring the horn.
twong85
08-25-2004, 05:53 PM
Well for my 91 240 I took the quick release had two connectors on both ends of it but my nismo hub only have 1 connecter. I wired the hot wire to the single wire on the hub and slipped the ground wire connection in between the metal face of the hub and the quick release as I tightened it onto the hub, this way the wire was properly grounded. On an hkb hub i think theres 2 connections on the hub so the procedure would have to be done on the hub/steering column end of the installation.
ch1873857
08-25-2004, 06:06 PM
why the hell do you need to remove the dash?
i have a smaller QR and did what importnut did. the horn is woring great
http://wasabigarage.com/img/pics/quickrelease/Quick_release_2.JPG
http://wasabigarage.com/img/pics/quickrelease/Quick_release_4.JPG
i used a strip of metal from a spare radio sleeve and bolted it to the top bolt that holds the spiral cable set.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.