98 240sx rb25 GTX3076r

[crazyboost180]

$10,500 obo

I had this up earlier in the year and couldnt commit to selling it but am ready to build a v8 powered car. I bought the car as a roller part out from Knoxville, TN and the best part of this chassis is it has no rust. The car is a factory 5 speed SE 1998. The entire front end was stripped, side skirts removed, and tail lights taken. It has a clean title but I have never car faxed it to know what history is behind it. All of the body panels are new oem nissan(fenders, grill, headlights, corners, turn signals, hood). It also has a new windshield. The car currently dynod 430 wheel @ 20psi. It has a fairly conservative tune on it and could easily be pushed for more. I have a little more than 18 grand in the build so far and I can back it up with receipts.
Mod List:

r33 rb25det series 1
AEM V2 engine management
greddy style intake manifold
new gasket set
jgy fuel rail
precision 1000cc injectors
custom manifold
custom downpipe
turbosmart 38mm gate
genuine garret GTX3076R .82 R
custom oil and water lines
spec stage 3+ clutch
lq9 chevrolet coils
mishimoto theormostat
n1 waterpump
new oil pump
greddy timing belt
new timing tensioner and idler pulley
zerolift rb25 mounts
megan racing engine mounts
1 piece driveshaft shop aluminum driveshaft
tial 50mm bov
intercooler and piping
koyo radiator
flexalite 440 fans
aem 320 fuel pump
fuellab fuel filter
6an fuel lines and fittings
apex gt spec exhaust
defi boost, water temp, and oil pressure
aem uego wideband
work xd9 wheels 18x9 18x10
265 35 18 rt-615 rear tires 1100 miles on each
235 40 18 nitto nt05 front tires 1100 miles on each
tein HE coilovers
new moog tie rod ends
isis pro rear upper control arms
isis pro rear toe control arms
vlsd from a 98 240sx abs car
new radio trim bezel
new shifter trim bezel
all of the factory gauges are functional
the car doesn not have A/C

http://i217.photobucket.com/albums/cc100/estoril00coupe/1998%20240sx/IMG_20150803_200439.jpg (http://s217.photobucket.com/user/estoril00coupe/media/1998%20240sx/IMG_20150803_200439.jpg.html)
http://i217.photobucket.com/albums/cc100/estoril00coupe/1998%20240sx/IMG_20150803_195911.jpg (http://s217.photobucket.com/user/estoril00coupe/media/1998%20240sx/IMG_20150803_195911.jpg.html)
http://i217.photobucket.com/albums/cc100/estoril00coupe/1998%20240sx/IMG_20150803_194144.jpg (http://s217.photobucket.com/user/estoril00coupe/media/1998%20240sx/IMG_20150803_194144.jpg.html)
http://i217.photobucket.com/albums/cc100/estoril00coupe/1998%20240sx/IMG_20150803_194131.jpg (http://s217.photobucket.com/user/estoril00coupe/media/1998%20240sx/IMG_20150803_194131.jpg.html)
http://i217.photobucket.com/albums/cc100/estoril00coupe/1998%20240sx/IMG_20150803_194101.jpg (http://s217.photobucket.com/user/estoril00coupe/media/1998%20240sx/IMG_20150803_194101.jpg.html)
http://i217.photobucket.com/albums/cc100/estoril00coupe/1998%20240sx/IMG_20150803_194046.jpg (http://s217.photobucket.com/user/estoril00coupe/media/1998%20240sx/IMG_20150803_194046.jpg.html)
http://i217.photobucket.com/albums/cc100/estoril00coupe/1998%20240sx/IMG_20150803_194036.jpg (http://s217.photobucket.com/user/estoril00coupe/media/1998%20240sx/IMG_20150803_194036.jpg.html)
http://i217.photobucket.com/albums/cc100/estoril00coupe/1998%20240sx/IMG_20150803_194026.jpg (http://s217.photobucket.com/user/estoril00coupe/media/1998%20240sx/IMG_20150803_194026.jpg.html)
http://i217.photobucket.com/albums/cc100/estoril00coupe/1998%20240sx/IMG_20150803_194018.jpg (http://s217.photobucket.com/user/estoril00coupe/media/1998%20240sx/IMG_20150803_194018.jpg.html)
http://i217.photobucket.com/albums/cc100/estoril00coupe/1998%20240sx/IMG_20150509_183635.jpg (http://s217.photobucket.com/user/estoril00coupe/media/1998%20240sx/IMG_20150509_183635.jpg.html)
http://i217.photobucket.com/albums/cc100/estoril00coupe/1998%20240sx/IMG_20150301_133333.jpg (http://s217.photobucket.com/user/estoril00coupe/media/1998%20240sx/IMG_20150301_133333.jpg.html)
http://i217.photobucket.com/albums/cc100/estoril00coupe/1998%20240sx/IMG_20150301_132746.jpg (http://s217.photobucket.com/user/estoril00coupe/media/1998%20240sx/IMG_20150301_132746.jpg.html)
http://i217.photobucket.com/albums/cc100/estoril00coupe/1998%20240sx/IMG_20150301_132711.jpg (http://s217.photobucket.com/user/estoril00coupe/media/1998%20240sx/IMG_20150301_132711.jpg.html)
http://i217.photobucket.com/albums/cc100/estoril00coupe/1998%20240sx/IMG_20150301_132702.jpg (http://s217.photobucket.com/user/estoril00coupe/media/1998%20240sx/IMG_20150301_132702.jpg.html)
http://i217.photobucket.com/albums/cc100/estoril00coupe/1998%20240sx/IMG_20150301_132654.jpg (http://s217.photobucket.com/user/estoril00coupe/media/1998%20240sx/IMG_20150301_132654.jpg.html)
http://i217.photobucket.com/albums/cc100/estoril00coupe/1998%20240sx/IMG_20150301_132647.jpg (http://s217.photobucket.com/user/estoril00coupe/media/1998%20240sx/IMG_20150301_132647.jpg.html)
http://i217.photobucket.com/albums/cc100/estoril00coupe/1998%20240sx/IMG_20150301_132637.jpg (http://s217.photobucket.com/user/estoril00coupe/media/1998%20240sx/IMG_20150301_132637.jpg.html)

[Hatemy7]

Wow this thing is beautiful. GLWTS

[taeisbeast]

bet that thing pulls like a mofo

[Koukiii]

bet that thing pulls like a mofo

For sure this thing must be screaming @ 20PSI.

GLWS very nice car and price!

[2muchboost]

So tempting...this car is so clean. But no AC and Central Texas do not mix so I will have to wish you luck on your sale.

[crazyboost180]

Since I have had a few questions regarding what I started with:
This is the day the car rolled off the trailer from Knoxville.
http://i217.photobucket.com/albums/cc100/estoril00coupe/1998%20240sx/IMG_132712272972159.jpeg (http://s217.photobucket.com/user/estoril00coupe/media/1998%20240sx/IMG_132712272972159.jpeg.html)

[SLiDe_WaYz]

Do you have the AC compressor, etc? In order to install the AC at some point if wanted?

[crazyboost180]

I left the rb25 ac compressor on the engine, I also have some of the s14 a/c lines. In order to do A/C you would need to get creative with the factory lines and have them modified to work with the rb25 compressor. You would also need to add some wiring for pressure switch. The last thing you would need would be a condenser. In order to get the condenser in the chassis you would have to modify the core support. I am running flexalite pushers and they wont fit between the engine and the radiator. You would have to notch the core support and bring the radiator further away from the engine. Then move the fans and install the condenser.

[theBoost]

if you would only trade...haha

[crazyboost180]

I will listen to trade offers.

[theBoost]

ive got a ford 302 v8 in an e36 french imported chassis.

[soundboy]

Perfect power plant.

[NY2NV Miner]

Man this car is tempting. Where in Wisconsin is the car located?

[crazyboost180]

I am located ten minutes west of Milwaukee in a town called Waukesha. About five minutes from exit 297 on I94

[crazyboost180]

Before some of you send me any more low ball offers... this is what I have in the car in just parts. Think about this before you send me some crazy offer. I priced this car very fairly. If you have any issues with any of the prices or totals please send me a PM and explain to me how crazy I am.

rb25det front clip $1400
greddy style intake maniofold $350
OEM nissan rb25det gasket set $300
JGY 1000cc Injectors $420
JGY fuel rail $160
top mount turbo manifold and downpipe $900
turbosmart 38mm smartgate $230
genuine garret GTX3076r .82ar $1600
aem v2 engine manegament $1400
spec stage 3+ clutch $450
new lq9 chevrolet coils advance autoparts $300
mishimoto colder thermostat $30
new n1 waterpump $200
new rb25 oil pump $220
greddy timing belt $155
new tensioner setup for timing belt $75

engine build subtotal $8340



zerolift mounts + megan racing sr20 motor mounts $300
aluminum driveshaft shop driveshaft $300
tial 50mm BOV $200
CXracing intercooler and piping $400
koyo radiator $230
flexalite 440 fans $250
aem 320 fuel pump $100
fuel lan 6an fuel filter $135
6an fuel lines and 6an fittings $200
apex GTspec exhaust $400
replacement sideskirts $280
misc interior pieces and clips for sideskirts $240
kouki tail lights $260
NEW oem Nissan kouki fenders, hood, headlights cornerssignals jdm front bumper grill $2800


defi gauges $550.00
aem wide band $150.00

WORK xd9 18x9 18x10 1300 + 300 for powder coating $1600
new tires $800

tein HE coilovers $700
isis pro rucsa and toe control arms $260
new moog tie rod ends $60

car/ chassis subtotal $10265


GRAND TOTAL $18605

[Hatemy7]

Before some of you send me any more low ball offers... this is what I have in the car in just parts. Think about this before you send me some crazy offer. I priced this car very fairly. If you have any issues with any of the prices or totals please send me a PM and explain to me how crazy I am.

rb25det front clip $1400
greddy style intake maniofold $350
OEM nissan rb25det gasket set $300
JGY 1000cc Injectors $420
JGY fuel rail $160
top mount turbo manifold and downpipe $900
turbosmart 38mm smartgate $230
genuine garret GTX3076r .82ar $1600
aem v2 engine manegament $1400
spec stage 3+ clutch $450
new lq9 chevrolet coils advance autoparts $300
mishimoto colder thermostat $30
new n1 waterpump $200
new rb25 oil pump $220
greddy timing belt $155
new tensioner setup for timing belt $75

engine build subtotal $8340



zerolift mounts + megan racing sr20 motor mounts $300
aluminum driveshaft shop driveshaft $300
tial 50mm BOV $200
CXracing intercooler and piping $400
koyo radiator $230
flexalite 440 fans $250
aem 320 fuel pump $100
fuel lan 6an fuel filter $135
6an fuel lines and 6an fittings $200
apex GTspec exhaust $400
replacement sideskirts $280
misc interior pieces and clips for sideskirts $240
kouki tail lights $260
NEW oem Nissan kouki fenders, hood, headlights cornerssignals jdm front bumper grill $2800


defi gauges $550.00
aem wide band $150.00

WORK xd9 18x9 18x10 1300 + 300 for powder coating $1600
new tires $800

tein HE coilovers $700
isis pro rucsa and toe control arms $260
new moog tie rod ends $60

car/ chassis subtotal $10265


GRAND TOTAL $18605

Overall the car is beautiful and well done!!!! Its worth every penny.


I am sure you've gotten some 5k-6k offers. Overall I wish you the best and I am sure you'll get what your asking for her.

[Toomuchboost12]

love those XD9'S . well put together s14 . OEM AERO FTW . to be honest my cousin has had an FD3S with 1jz in it and he loves a buddies of mine rb26 swapped s13 better lol . and the FD And S14 are similar chassis in some way's but its all about preference . anyway GLWS

[Hatemy7]

love those XD9'S . well put together s14 . OEM AERO FTW . to be honest my cousin has had an FD3S with 1jz in it and he loves a buddies of mine rb26 swapped s13 better lol . and the FD And S14 are similar chassis in some way's but its all about preference . anyway GLWS

I would prefer the FD without a doubt ( just bc I am rotary guy ) but these are sexy as well

[Syclone1990]

Please contact asap very interested I live in rice lake wi could look this week 7156513553 brandon

[crazyboost180]

Edit for still a hope of being able to sell this

[NY2NV Miner]

My wallet thanks you, I was tempted to buy this.

[crazyboost180]

I am going to bump this back up as I have decided to start over with a another s14 to build.

[BrokenWhite240]

Anymore pics of the intercooler piping?

[crazyboost180]

I can get some in about 2 1/2 hours when I get home from work.

[Sforteen]

I sold a fairly clean 97 kouki with Oem rebuilt SR20 and a few bolts ons, power FC and cheap wheels/suspension with almost 200k miles for 8200

Your car is worth everybit of what your asking IMO

GLWS sir.

[GGTheSeventh]

decent price. Good luck.

[aubry588]

so in love with this car.

[crazyboost180]

Bring it back up for the day.

[crazyboost180]

Up for the new week.

[Koukiii]

Dude what the fuck is going on here? Mega clean original kouki rb25 swapped with all the goodies and still not sold at 10.5k???

I would give you every dollar you are asking for. Wish I hadn't bought my stock 97 auto!

[crazyboost180]

You know I dont know. Its pretty much every go fast part you could want for one of these builds. The only reason Im selling it is I have decided to go 5.3 turbo v8 as parts are SO much easier cheaper to find. I thought about keeping it over the weekend and spent the last 2 days looking for a rb26 head in the US and cant find one. If I had a chevy engine I could literally have my choice. I want 600+ hp and this just doesnt seem like the best route to get there.

[10psitx]

You know I dont know. Its pretty much every go fast part you could want for one of these builds. The only reason Im selling it is I have decided to go 5.3 turbo v8 as parts are SO much easier cheaper to find. I thought about keeping it over the weekend and spent the last 2 days looking for a rb26 head in the US and cant find one. If I had a chevy engine I could literally have my choice. I want 600+ hp and this just doesnt seem like the best route to get there.

Great car, good luck with the sale... not sure if you mentioned the RB head for comparison on parts availability or if you are really looking for one ....but, my buddy had 3 -RB26 engines and 2 are being parted....if you are interested let me know....

[crazyboost180]

Happy October back to the top.

[crazyboost180]

The car is sold. Thanks to the new owner for making it an easy sell!

[jvtec95]

Congrats on the sale, very nice car!

To anyone who had been looking at this car, I'll be posting an ad for a 1998 black KA24DET car in WI soon. PM me if interested.

[dyost]

Is this still available?