PDA

View Full Version : **WSRD Brake Line Relocation Kits!**

PoorMans180SX
07-28-2015, 04:22 PM
http://i.imgur.com/M206GjE.jpg

Our brake line relocation kits route under the factory crossmember, cleaning up the bay and making room for turbo setups. They're compatible with S13/Z31/Z32/Pathfinder master cylinders and are made in the USA! Teflon braided stainless line coated in a protective teflon outer shell means these are built to last! (Pictured with V1 High pressure power steering line).

Comes with all the fittings to connect your master cylinder to the caliper and rear brake line(s).

http://www.whalentuned.com/nissan-240sx.html

Zilvia price: $199 shipped! PM me to order!
TheRealSy90
07-28-2015, 04:56 PM
Do you offer the lines from the front and rear calipers also? Or can you recommend a good brand for those of similar quality.
PoorMans180SX
07-28-2015, 05:14 PM
Do you offer the lines from the front and rear calipers also? Or can you recommend a good brand for those of similar quality.

We don't currently offer the caliper lines, but we recommend and install Goodridge lines here at the shop on a variety of vehicles. We can get them both to you in the same box.
K_style
07-29-2015, 06:14 AM
Nice !!!
Is it made to order? if so, what is turn around time?
ChaseBays took 391 weeks... LOL
PoorMans180SX
07-29-2015, 10:36 AM
Nice !!!
Is it made to order? if so, what is turn around time?
ChaseBays took 391 weeks... LOL

HAHA, they are made to order, but the maximum turn around time is four weeks. We usually get them done in two.
Freddy
07-29-2015, 06:50 PM
Damn I should have waiting till this special to order mine.
driftage240
07-29-2015, 11:34 PM
Price on these brake lines and also the clutch line (from master to slave) shipped to 91042 lmk
Zero-Offset
07-30-2015, 12:56 AM
installed my kit finally, went in fantastic! more than enough line and everything went together smoothly. kit is easy to figure out. would support Whalen again!!!
PoorMans180SX
07-30-2015, 08:24 AM
Damn I should have waiting till this special to order mine.

You have a PM good sir.

Price on these brake lines and also the clutch line (from master to slave) shipped to 91042 lmk

I'll shoot you a quote later today.

installed my kit finally, went in fantastic! more than enough line and everything went together smoothly. kit is easy to figure out. would support Whalen again!!!


Thanks for the kind words! Good to hear!
hellion240sx
08-07-2015, 07:09 AM
do you have before and after shots of engine bay?
Mitsubayati
08-07-2015, 03:11 PM
Is the fitting with the o-ring seal that goes into the high pressure side of the rack an off the shelf item or is it custom made? I've read that the off the shelf fittings do not correctly seal because they are slightly short and what people have done is machine it to get the o-ring to fit correctly.
PoorMans180SX
08-10-2015, 10:24 AM
do you have before and after shots of engine bay?

I only have after shots unfortunately!

http://i.imgur.com/r4ObvcA.png


Is the fitting with the o-ring seal that goes into the high pressure side of the rack an off the shelf item or is it custom made? I've read that the off the shelf fittings do not correctly seal because they are slightly short and what people have done is machine it to get the o-ring to fit correctly.

We use off-the-shelf fittings, but we've never had an issue with them leaking. I feel like people are often afraid to tighten them all the way.
Halfamazing
08-10-2015, 06:07 PM
I know this says s13,z31,z32 but... I have a s14 master and I need this kit. Would it work or can you make me one?
PoorMans180SX
08-11-2015, 01:01 PM
I know this says s13,z31,z32 but... I have a s14 master and I need this kit. Would it work or can you make me one?

This kit won't work with a S14 master. If you were local, we could make you a kit, but I don't feel comfortable building a kit without the ability to test fit it. I've been trying to get a S14 in here for a while now, but so far haven't been able to. When we do, we'll build a kit and post it up!