King of doing it wrong. LOOK AT MY SPACERS!

[mhubeny180sx]

http://i166.photobucket.com/albums/u116/waxball88/5F50C31A-51A3-486F-881D-AA5779B0D766_zpsrvqf045l.jpg

Hey guys I've attached some pics to show you what I'm trying to deal with, circled in red are the spots im getting major rub on the back tires, and on the front wheels also circled in red is where my tires are rubbing very hard on my front fenders when i turn, I have the little over fenders shown in the last pic, but I dont really wanna just jump in and start cutting my fenders without some tips or advice, because even if i do cut them, the front wheels are rubbing on mount points for the front bumper kit and the side skirts where they bolt on. Its already sitting pretty high, I just want some tips on how to make it work at this height, and what you guys would do to make it go lower, without changing tires every 50miles from cutting lol. I do wanna keep this offset though.
IF YOU ARE GOING TO BE RUDE MOVE ALONG, CUZ IM BORED OF REK'IN AMATEUR TROLLS 2EZ KTHXBAI
Rears showing fender rub

http://i.imgur.com/8a0jKxQ.jpg

http://i.imgur.com/kL6zbO1.jpg

Fronts

http://i.imgur.com/6SuUSSu.jpg

http://i.imgur.com/hHRixyP.jpg

And the old z flares that will be installed, might also just put v2 rb flares not sure yet.

http://i.imgur.com/F2jjGOc.jpg

[Sileighty_85]

Remove your 50mm spacers add a little camber and that should fix your issue.


Why run that much of a spacer for some what looks like 8.5J wheels just to use those flares?


If you had some 11J wheel I could understand that.




Looks retarded.

[silviaks2nr]

Why do you have huge ass spacers? It looks retarded. Tires are way too tall for a 240 that low too. This is another case of don't do something unless you know what the fuck you're doing.

[mhubeny180sx]

Remove your 50mm spacers add a little camber and that should fix your issue.


Why run that much of a spacer for some what looks like 8.5J wheels just to use those flares?


If you had some 11J wheel I could understand that.




Looks retarded.

its a 9.5 in the front and 10.5 in the rears

[Sileighty_85]

those pics are very deceiving then. regardless if you have to run flares cuz you are using 50mm spacers it looks stupid.

[mhubeny180sx]

those pics are very deceiving then. regardless if you have to run flares cuz you are using 50mm spacers it looks stupid.

ok but im asking for suggestions on how to make it work, dont care what you think of how it looks because it doesn't even have the side skirts or bumper on if i wanted to know how you think it looks I would ask what people think, you don't see me looking at your avatar and saying your face looks stupid right? If you don't have anything constructive to say or an answer to what im looking for they why bother commenting? post count? god... :picardfp:

[Sileighty_85]

I already told you, remove the 50mm spacers and add some camber.


Bumper and side skirts aren't gonna make that look any better.


post count? That means nothing to me.


Im trying to help you from destroying a perfectly nice S13 and making you look like an idiot when ppl look at your setup.

[mhubeny180sx]

I already told you, remove the 50mm spacers and add some camber.


Bumper and side skirts aren't gonna make that look any better.


post count? That means nothing to me.


Im trying to help you from destroying a perfectly nice S13 and making you look like an idiot when ppl look at your setup.

http://i.imgur.com/eEH7Dxo.jpg

yeah you're right that looks SOO retarded lol... god u have no taste.

[Sileighty_85]

Yeah, good luck with your version...


Ok yeah I have no taste (Sarcasm)

[omgRWDgoodness!]

If having "taste" means not having glass on the car, then yeah I guess I don't have any taste either.


Retards...

[OBEEWON]

"Doc it hurts when I do this..."

[turbo2nr]

This guy should move to Florida...

[greddy2die]

Ughhh no please not Florida, there are already plenty of other people here ruining it for the small minority of us not doing it wrong.

[5280VertDET]

Here's the deal dude, you will have to cut your panels AND get over fenders or flares.

End of story.

[turbo2nr]

Give RWB a call and see how to stack spacers to get the "look" you want to achieve.

[ILoveJDM]

another classic case of I saw it on the internet, and I have zero idea of how to build cars.

[deolio]

you can't leave it as-is and not have any rubbing. contrary to popular belief, offset isn't everything. remove the dumbfuck spacers, pull the fenders (please have a professional do it), lower the car, and add some camber.

[1on1]

Don't bother putting flares on stock body. Car will not flow. Also, the car you posted is...whatever and I don't understand the rear lip spoiler when he has a gt wing....but its just an opinion.

I would rather drive a stock body s-chassis with wheels and rolled fenders before you destroy your rear qtr panel (assuming the other side is fine).

If you're thinking of getting any aero in the future, I suggest going with sileighty_85's suggestion until you acquire the pieces so you can look at it and decided to go with it or not.

Take the advice or not, this is what you wanted.

[mhubeny180sx]

Here's the deal dude, you will have to cut your panels AND get over fenders or flares.

End of story.

ok, thank you. glad someone said something helpful other than be jealous of my spacers that cost more than their wheels lol.

Give RWB a call and see how to stack spacers to get the "look" you want to achieve.

RWB ?

[greenwood]

Dog hang time is the best http://i.imgur.com/8a0jKxQ.jpg

I miss my boy so much. Wish I could have spent more time with him :picardfp:

Enjoy your time with them my man and do whatever you want to your car, it's YOUR CAR not theirs.

http://thewolfweb.com/photos/00530421.jpg

[deolio]

http://i31.photobucket.com/albums/c400/mexfoodisgood/384D0611-3565-438A-9C87-23D006B625E5_zpsssh2u4wl.jpg (http://s31.photobucket.com/user/mexfoodisgood/media/384D0611-3565-438A-9C87-23D006B625E5_zpsssh2u4wl.jpg.html)

[dizzariot]

Hahahaahahahaha and this is the asshole bashing FS threads. What a fucking tool. You can't even be a StanceQueen without fucking training wheels.

[japslapsilvia]

ok, thank you. glad someone said something helpful other than be jealous of my spacers that cost more than their wheels lol.



RWB ?

:picardfp: wow....just wow.

[ILoveJDM]

than be jealous of my spacers that cost more than their wheels lol.


=

This is the problem with people these days. Are you actually bragging about using spacers? wtf

People aren't hating because they're jealous, your car actually is terrible.

[mhubeny180sx]

whats wrong with buying custom high end spacers to fit wheels I like?

Like i said, more than ppls wheels:
http://i.imgur.com/QQtOZwu.png

Sorry my car is full of only quality parts 55,000 original kilometers 180sx brick front end, its not shit m8.

lol sorry i didnt wash, add a filter to my ipad photo, and put all my aero pieces in my "need help" pictures lol

[jsu1012]

way to go.. now your dog hates you.

http://i1231.photobucket.com/albums/ee504/jsu1012/8a0jKxQ_zpsznh0kcsd.jpg (http://s1231.photobucket.com/user/jsu1012/media/8a0jKxQ_zpsznh0kcsd.jpg.html)

[japslapsilvia]

whats wrong with buying custom high end spacers to fit wheels I like?

.


umm they dont fit, if they did you wouldn't have posted

[Almighty So]

whats wrong with buying custom high end spacers to fit wheels I like?

What's wrong? they don't fit hahaha

hahahha maybe someone will feel sorry for you lol and donate some money to take this stuff to the dump for you. This is why I dont post here toxic teenagers like you with swagged out slammed to piss dildo shifter crown royal sticker bomb crew that ruin nissans one car at a time.

hey man, at least those kids know how to get their cars "slammed to piss" by themselves.

[mhubeny180sx]

umm they dont fit, if they did you wouldn't have posted

they will fit. seems like most ppl here is mad about my spacers and wheels and cant understand simple english and hate my idea of a car rather than suggest something constructive, if i wanted to have the rolled fender look like every 240 fanboi I wouldnt have gotten the spacers or these wheels. So i guess i need to state myself again.

I intend on keeping this width/offset
Ride height - no it doesnt need to be fanboi slammed nor do i want it to be
I will be using the z fenders in the pic or rb v2 fenders
suggestions on what to do plz n thks

[mhubeny180sx]

What's wrong? they don't fit hahaha



hey man, at least those kids know how to get their cars "slammed to piss" by themselves.

dude u dont even have a running car, all u got is ur zilvia account and ur rusted fake c's shifter with missing boot and fake brides lol.

[Almighty So]

suggestions on what to do plz n thks

can you read?

Remove your 50mm spacers add a little camber and that should fix your issue.

Tires are way too tall for a 240 that low too.

Here's the deal dude, you will have to cut your panels AND get over fenders or flares.

remove the dumbfuck spacers, pull the fenders (please have a professional do it), lower the car, and add some camber.

Don't bother putting flares on stock body.

This guy should move to Florida...

seems like everyone in here has given you advice. you just aren't happy because they aren't all idiots with horrible taste like yourself.



Take the advice or not, this is what you wanted.

and uh.. i have two running cars, the bride sold. and authentic clean C's will likely be in my coupe. :fawkd:

[Ka24Power]

>Buys wheels in okay offsets, no rub
>Hmm not stance enough
>spends LOL amounts of money on spacers to make it look siq


>guys now my wheels rub. Pls dont make fun of my taste how do i fix it. guys. pls help

[mhubeny180sx]

Dont stress about it guys, seems you guys don't know a whole lot about 240s, body work or just dont know how to read.
SPACERS OR NOT MY WHEELS STILL HIT THE FENDERS
By reading some of the responses I can tell some guys aren't very intelligent, few helpful comments, but seems as if everyone is in tldr mode or just a lot of jealousy b/c ppl here can barely afford rotas or battles, I'll figure something out I'm very smart. Ill build the car how I want with my money thank you very much :)

[japslapsilvia]

Dont stress about it guys, seems you guys don't know a whole lot about 240s, body work or just dont know how to read.
SPACERS OR NOT MY WHEELS STILL HIT THE FENDERS
By reading some of the responses I can tell some guys aren't very intelligent, few helpful comments, but seems as if everyone is in tldr mode or just a lot of jealousy b/c ppl here can barely afford rotas or battles, I'll figure something out I'm very smart. Ill build the car how I want with my money thank you very much :)

Well then the answer is simple. Mock up the flares. Cut accordingly. Whatever it hits, relocate, or remove accordingly.

[dizzariot]

Dont stress about it guys, seems you guys don't know a whole lot about 240s, body work or just dont know how to read.
SPACERS OR NOT MY WHEELS STILL HIT THE FENDERS
By reading some of the responses I can tell some guys aren't very intelligent, few helpful comments, but seems as if everyone is in tldr mode or just a lot of jealousy b/c ppl here can barely afford rotas or battles, I'll figure something out I'm very smart. Ill build the car how I want with my money thank you very much :)


- Your wheels are 9.5F and 10.5R? Nothing new, even on a stock-bodied S13.
- Calls the rest of the community fanboiz but wants to rock overfenders so hard he bought stupidly priced spacers. Pretty sure overs are the most fan-fucking-fukkboi thing you can do in recent times.


Seems like you have a headache from dealing with all these rude dudes. Go take an aspirin. I recommend a 9mm dose.

[mhubeny180sx]

- Your wheels are 9.5F and 10.5R? Nothing new, even on a stock-bodied S13.
- Calls the rest of the community fanboiz but wants to rock overfenders so hard he bought stupidly priced spacers. Pretty sure overs are the most fan-fucking-fukkboi thing you can do in recent times.


Seems like you have a headache from dealing with all these rude dudes. Go take an aspirin. I recommend a 9mm dose.

yeah totally you see s13s with z fenders or rb v2s all the time i bet. You're just mad because I made you look like a fool for trying to sell louvers for $800 when you can easily get them for $450 on yaj all day long (idk why anyone would want them but to each their own)

so much money on me it wont even fold
https://www.youtube.com/watch?v=jVhMt26F7gA

[ILoveJDM]

Seems like you have a headache from dealing with all these rude dudes. Go take an aspirin. I recommend a 9mm dose.

With his tax bracket, he can afford a .50 bmg

[mhubeny180sx]

Well then the answer is simple. Mock up the flares. Cut accordingly. Whatever it hits, relocate, or remove accordingly.

Thanks, problem is,its hitting in the spots on the front wheels right on that body line, basically exactly where the front bumper mounts, and where the side skirt mounts (you know the 2 small holes about 6 inches apart vertically) so if i cut this I'm not sure what to do next, i could make new mounting points, but them my side skirts will be too long you know what I mean and my bumper wont fit right, it will be pulled too far forward, so this is basically where im kinda stumped.

[TheRealSy90]

Seems like you don't know a whole lot about 240's, or body work.

[mhubeny180sx]

Seems like you don't know a whole lot about 240's, or body work.

hence the thread kek :picardfp:

I'm pretty cavalier and don't get bothered by much to the point where I could stand still in one spot in -10 degree weather with people throwing eggs at me for hours (assuming the eggs aren't frozen)

[ehhhregartless]

What kind of suspension work have you done?

[PeaceOnesxWai]

What are your wheel specs? What are your tire specs? Spacer sizes? This info would have given half the members here a solid answer for you besides your pics. If you had posted this on your very first post this would have gone differently.

There are countless threads that give you info on wheel fitment but yet you want to be spoon fed and take constructive criticism negatively. Im gonna say this is not the forum for you.

[Almighty So]

so much money on me it wont even fold
https://www.youtube.com/watch?v=jVhMt26F7gA

:picardfp:

there's a huge difference between buying nice parts and wasting $800 on wheel spacers like a dumb fuck.

(idk why anyone would want them but to each their own)

says market prices are too high for discontinued items that could be shipped from japan.
buys wheel spacers with 1000% mark up.

[mhubeny180sx]

What kind of suspension work have you done?

Only thing I've done to it myself are new coil overs to replace the old tiens the rears were blown so I just tossed all 4. But there are aftermarket control arms and tension rods the whole works, I thought about changing the caster so the wheels come more toward the rear wheels, but then the wheels will just hit the back of the fender, and this is where I started to think about the rocketbunny v2 fenders as you just cut a whole hunk of fender out and slap those puppies on.

What are your wheel specs? What are your tire specs? Spacer sizes? This info would have given half the members here a solid answer for you besides your pics. If you had posted this on your very first post this would have gone differently.


There are countless threads that give you info on wheel fitment but yet you want to be spoon fed and take constructive criticism negatively. Im gonna say this is not the forum for you.

Its not about being spoon fed, in my original unedited post and several times in the thread, I specify that I don't plan on changing the wheels (which i did specify the size 18 x 9.5/10.5j), or the spacers, nor do i plan changing the tires, constructive criticism is not "luks retardid bor" I'm not asking for criticism, nor do I give a hoot lol.


:picardfp:

there's a huge difference between buying nice parts and wasting $800 on wheel spacers like a dumb fuck.



says market prices are too high for discontinued items that could be shipped from japan.
buys wheel spacers with 1000% mark up.

what do you know about quality mister replica. Have a read and learn something mister ebay spec r http://www.wheelspacers.ca/.

[Almighty So]

asks for advice on how other users would try to make horribly sized wheels fit providing no info.
gets shit on.
claims he doesn't care what other users would do because it's his car and it can be ugly if he wants it to.

if you're going to try and sound smug about the OP
("which i did specify the size")
then at least edit the OP to specify the size.. Lol.

[mhubeny180sx]

asks for advice on how other users would try to make horribly sized wheels fit providing no info.
gets shit on.
claims he doesn't care what other users would do because it's his car and it can be ugly if he wants it to.

if you're going to try and sound smug about the OP
("which i did specify the size")
then at least edit the OP to specify the size.. Lol.

Its in my second post on the thread lol I think your fake raybans are messing with your ability to read.

[Almighty So]

http://i1382.photobucket.com/albums/ah247/Almighty-So/adc6f4a3-c99d-4172-b69e-aa01c5622636_zps9jy3sz2i.jpg (http://s1382.photobucket.com/user/Almighty-So/media/adc6f4a3-c99d-4172-b69e-aa01c5622636_zps9jy3sz2i.jpg.html)

Lol last post making you look stupid.
but i'll be lurking cause I know some other people have plenty left before this gets locked/deleted :mrmeph:

[mhubeny180sx]

thanks for taking a picture just for me :) and the precious advice to my op jk lol keep spamming that post count, I guess some ppl need a sense of belonging. In the years Ive been lurking zilvia you definitely are amongst the most dense of the characters found here.

[silviaks2nr]

Wastes $800 spacers, a few thousand on wheels the wrong size and still has stock brakes. Priorities.

[PeaceOnesxWai]

Its not about being spoon fed, in my original unedited post and several times in the thread, I specify that I don't plan on changing the wheels (which i did specify the size 18 x 9.5/10.5j), or the spacers, nor do i plan changing the tires, constructive criticism is not "luks retardid bor" I'm not asking for criticism, nor do I give a hoot lol.


:facepalm: you are on another type of retard level..
What is the wheel offset? 9.5/10.5...? You are by asking a question with no facts. This clearly shows what a fuckboi you are not knowing jack about cars.

Skimming 2 pages of your idiocy, I can point out that you went online, bought your fanboy shit that you did 30 minutes of research on, got it, installed it, post this shit b/c it didnt fit, then realized what a moron you are and wont accept the fact and plus youre broke after spending $750 on spacers so you really cant change the set up...

all because you think this is a sweet fking car bro and you gotta make it look like that n be broski (very original)
http://i.imgur.com/eEH7Dxo.jpg

[mhubeny180sx]

peaceone people like you are the reasons op companies like arc and hks nismo stop making awesome parts for the 240 and why companies like greddy lower their standards to keep up with fagboys like you that go around spreading replicas like the plague. What the hell does the offset matter? Am I going to change the offset or wheel size, you cant understand that how many times I hammer into your thick skull that "wheels/spacer/tire size will NOT change" broke after spending 750 on spacers lol please, you have no idea. Is it wrong to like someones wheel set up??? If you are going to be rude to me, yes, I will be rude back to you. Btw nice gypsy shack of a house you have there. I dont understand why people on here are so quick to attack someone, lol i dont even know you kid get outta my thread.

[ehhhregartless]

It looks like you'll either have to do a bunch of cutting and feel it out as you go or cut a little bit and run crazy stiff spring rates without much travel.

[1on1]

What's the offset of your wheels?

[mhubeny180sx]

+35 front + 25 rear

[Stiveno]

ruining your car with "expensive baller quality parts" ≠ taste

beg that company to return those 2 foot spacers and put the wheels back on normally.

if it still rubs have a professional give the quarters a slight roll/pull because it is obvious you have no fucking clue what you are doing. You keep talking about "fuckboys" but ruining your clean quarters with "sik widebody" is step on to being one.

[1on1]

What size are your custom spacers?

[mhubeny180sx]

ruining your car with "expensive baller quality parts" ≠ taste

beg that company to return those 2 foot spacers and put the wheels back on normally.

if it still rubs have a professional give the quarters a slight roll/pull because it is obvious you have no fucking clue what you are doing. You keep talking about "fuckboys" but ruining your clean quarters with "sik widebody" is step on to being one.

Will they also roll and pull my coilovers? Wow all of the sudden someone spends money on something of quality and instant baller status. ehh. $700 spacers aren't baller, its a safety thing, just how like I bought real brides rather than fuckboi step 2: purchase bride reps and get paralyzed from the neck down when your rep seats snap in a collision. Nice baller wheelchair and medical bills bro.

[Stiveno]

Will they also roll and pull my coilovers? Wow all of the sudden someone spends money on something of quality and instant baller status. ehh. $700 spacers aren't baller, its a safety thing, just how like I bought real brides rather than fuckboi step 2: purchase bride reps and get paralyzed from the neck down when your rep seats snap in a collision. Nice baller wheelchair and medical bills bro.

this response literally made no sense, and wasn't really a response to what I said.

[mhubeny180sx]

let me walk you through it since you have difficulty following a conversation
stiveno: remove spacers
stiveno: while ur at it get someone to pull/roll fenders <insert cheeky commments in attempt to compensate for something>

Me: remove spacers ok
me: ok i removed spacers but my wheels hit my coilovers, since im absolutely clueless I will ask the professional to roll and pull my coilovers, if it worked on my fenders, it should work on my coilovers right <sarcasm incase you fail at following that too>

[Stiveno]

let me walk you through it since you have difficulty following a conversation
stiveno: remove spacers
stiveno: while ur at it get someone to pull/roll fenders <insert cheeky commments in attempt to compensate for something>

Me: remove spacers ok
me: ok i removed spacers but my wheels hit my coilovers, since im absolutely clueless I will ask the professional to roll and pull my coilovers, if it worked on my fenders, it should work on my coilovers right <sarcasm incase you fail at following that too>

Where did you write that your wheels hit your coilovers without spacers before that? I don't see it anywhere.

Here's the new solution buy wheels that fit

[mhubeny180sx]

l2read to your question, and to your solution. :)

[tetsuon18]

mother of fucking fucks... And just when i though I've seen retarded. So you think you can justify expensive ass spacers, (which you could have spent that money on engine upgrades, MORE suspesion, etc) with posting a picture of a REAL tuner? Guess what... he might be slightly lower, but I guarran fucken tee you that he has a ton of supporting mods to compensate with the modifications made to the roll center. Get rid of your stupid fucking spacers, your wheels are wide enough and look great. Spend your money on more functional stuff instead of trying to make your car what it really isn't. Don't cut into the body because eventually you'll just ruin a perfectly nice car all because you're a stubborn retard.:picardfp:

[harris180]

wait your wheels are 10.5 +25 rears and they hit the coilover? What brand are your coilovers?

[Sileighty_85]

Bro... There are only 4 ways to fix your problem (5 if you count setting your car ablaze until the tires melt off, Which sounds pretty good right now). They are all easy to figure out.

If you cannot figure out how to fix this easy solution then I highly suggest you stop what you are doing before you go past the PONR and have to resort to #5.

[KiLLeR2001]

Holy fuck those spacers honestly look like they are 65mm thick, LMAO!

Hope you have a case of wheel bearings on hand.

P.S., nice spacer bro...

http://i.imgur.com/04CsZw5.jpg

[ehhhregartless]

I knew something like that would show up lol

[turbo2nr]

So who is this RWB fella?

Does he use bigger spacers then this guy?

Will OP get his wheel and fenders to fit?

http://cdn.meme.am/instances2/500x/1075124.jpg


0_o Find out on the next episode of Zilvia....

[1on1]

Can you provide a photo of your spacers? Also, do you have any suspension parts installed?

[mhubeny180sx]

Bro... There are only 4 ways to fix your problem (5 if you count setting your car ablaze until the tires melt off, Which sounds pretty good right now). They are all easy to figure out.

If you cannot figure out how to fix this easy solution then I highly suggest you stop what you are doing before you go past the PONR and have to resort to #5.

why would i set my mint car on fire? so it can look like a combination of your wifes' face and your cars? multi colored unfinished panels and all droopy/saggy? nthx.

[mhubeny180sx]

lol all these ppl hating on me got the 900k mileage cars with gt wings to keep downforce on their garage dormant (due to not running) 240. My vehicle is not even 25% done and its miles past (from what ive seen) any of these hater's cars.

[Hiighboost2]

Digging that hole pretty deep I see.
Why don't you go ahead and figure it out on your own since you're so much more intelligent than the rest of us combined.
As a matter of fact.. why did you even start this thread seeing that your obviously some type of genius when it comes to car setups.

[Sileighty_85]

why would i set my mint car on fire? so it can look like a combination of your wifes' face and your cars? multi colored unfinished panels and all droopy/saggy? nthx.



hahaha ok bro, Now who's hating?


My 5 built cars out preform your soon to be dumpster spec S13 in every way.


Im more of a function over form kinda guy. Paint and body work is the last thing I worry about on all my cars. Not to mention none of my cars are anywhere close to being finished.


I leave all the easy stuff for last.


Since you can't understand the concept.


Rubber melts/burns when exposed to extreme temps. so when your tires melt and burn off the wheels then you don't have a problem with the tires hitting the fenders.

[mhubeny180sx]

My 5 built cars out preform your soon to be dumpster spec S13 in every way.


Im more of a function over form kinda guy. Paint and body work is the last thing I worry about on all my cars. Not to mention none of my cars are anywhere close to being finished.


I leave all the easy stuff for last.




lol such a lame excuse for not being able to afford to properly build a car. maybe if you focused your attention on building one very nice car, rather than 5 pieces of junk, you would have some credibility. feels nice when someone makes fun of your unfinished project right? Alot of ppl fail to see that this a thread asking for a suggestion that I possibly havent thought of, and not "hei guys my car finally finished look" FOLLOW ME ON GOOGLE PLUS.

[Sileighty_85]

lol such a lame excuse for not being able to afford to properly build a car. maybe if you focused your attention on building one very nice car, rather than 5 pieces of junk, you would have some credibility. feels nice when someone makes fun of your unfinished project right? Alot of ppl fail to see that this a thread asking for a suggestion that I possibly havent thought of, and not "hei guys my car finally finished look" FOLLOW ME ON GOOGLE PLUS.



HAHAHA Really? You are joking right? None of my cars are properly built?


Please enlighten me on how none of my cars are properly built? Aside from My AE86 which the engine was in an unknown state and I was on a time crunch to get running before I had to leave the US.


Maybe you should take a closer look at my build threads and notice the quality of parts that are installed in them.




My GT-R. Yeah so haggard
http://i73.photobucket.com/albums/i235/Neil_85/GTR/C58683AE-1663-45D6-80F3-B3B8CB0BF3C4_zpsdcxrse1n.jpg

[5280VertDET]

lol such a lame excuse for not being able to afford to properly build a car. maybe if you focused your attention on building one very nice car, rather than 5 pieces of junk, you would have some credibility. feels nice when someone makes fun of your unfinished project right? Alot of ppl fail to see that this a thread asking for a suggestion that I possibly havent thought of, and not "hei guys my car finally finished look" FOLLOW ME ON GOOGLE PLUS.

Dude, what is your deal? For real? Why such a chip on your shoulder?

Serious. Calm the fuck down and stop trying "win" every argument. The bottom line is that you simply can not run those wheels, those spacers without A LOT of body work.

Also, you keep mentioning safety for the justification for your spacers. The bottom line is that spacers aren't safe. If you want safe, buy wheels that fit with out the use of spacers. (I understand that you love these discontinued wheels)

Spacers put extra wear and tear on your drive line components, messes with the geometry and adds an additional failure point per wheel. (I don't care if they are made from titanium)

Please stop. This isn't a dick measuring contest, you are a keyboard cowboy and responding to the other trolls. If it is your car, and this is how you want it to look, you honestly should not be asking for advice here. You know what the answer is (also it's been post by me and others). You will need to pay someone to do the work for you and they will tell you that it's not possible or they will charge you a ton to do it (which clearly isn't a concern for you).

Honestly, do you think the hatch you referenced earlier made a post like this? No, he wanted to do it had the skills, or knew someone who does, to make it happen.

You can't ask a dumb question and not expect snarky responses.

[mhubeny180sx]

HAHAHA Really? You are joking right? None of my cars are properly built?


Please enlighten me on how none of my cars are properly built? Aside from My AE86 which the engine was in an unknown state and I was on a time crunch to get running before I had to leave the US.


Maybe you should take a closer look at my build threads and notice the quality of parts that are installed in them.




My GT-R. Yeah so haggard


you think its impressive, its an average gtr, there is one that looks exactly like it in my small ass mining town a few streets away from me with all the nismo goodies. cool you read zilvia and fanboy arc parts to get sik jdm status, that spoiler looks terrible. why dont you show us your rainbow 240s? Do i go bash your 240s, I have the mental capacity to understand people post things here that are a work in progress, so im not gonna chirp someones car, but if someone is gonna trash talk me of course I will defend myself, and Im very good at it. You dont see me posting my cadillac escalade ext or lincoln navigator around here rite why would i 240/fariladyz forum bro...

[mhubeny180sx]

Dude, what is your deal? For real? Why such a chip on your shoulder?

Serious. Calm the fuck down and stop trying "win" every argument. The bottom line is that you simply can not run those wheels, those spacers without A LOT of body work.

Also, you keep mentioning safety for the justification for your spacers. The bottom line is that spacers aren't safe. If you want safe, buy wheels that fit with out the use of spacers. (I understand that you love these discontinued wheels)

Spacers put extra wear and tear on your drive line components, messes with the geometry and adds an additional failure point per wheel. (I don't care if they are made from titanium)

Please stop. This isn't a dick measuring contest, you are a keyboard cowboy and responding to the other trolls. If it is your car, and this is how you want it to look, you honestly should not be asking for advice here. You know what the answer is (also it's been post by me and others). You will need to pay someone to do the work for you and they will tell you that it's not possible or they will charge you a ton to do it (which clearly isn't a concern for you).

Honestly, do you think the hatch you referenced earlier made a post like this? No, he wanted to do it had the skills, or knew someone who does, to make it happen.

You can't ask a dumb question and not expect snarky responses.


oh im sorry I didn't realize you had degree in engineering and physics from the university of google. Spacers are as safe as you make them. These spacers were made by a company professionally with a lot of experience making spacers (mostly for 4x4 applications) so I think they know what they are talking about when they sent me instructions to follow, making sure i had enough thread to attach to, proper torque, adjusting and adding lock tite after a certain amount of kilometers. I fail to see how a literal extension of the hub puts any more wear and tear on drive line components than a no spacer wheel would with the exact same offset.

[TheRealSy90]

oh im sorry I didn't realize you had degree in engineering and physics from the university of google.

Apparently you do so, please, teach us master.

[Sileighty_85]

you think its impressive, its an average gtr, there is one that looks exactly like it in my small ass mining town a few streets away from me with all the nismo goodies. cool you read zilvia and fanboy arc parts to get sik jdm status, that spoiler looks terrible. why dont you show us your rainbow 240s? Do i go bash your 240s, I have the mental capacity to understand people post things here that are a work in progress, so im not gonna chirp someones car, but if someone is gonna trash talk me of course I will defend myself, and Im very good at it. You dont see me posting my cadillac escalade ext or lincoln navigator around here rite why would i 240/fariladyz forum bro...



I never said it was hot shit. Like I said body work is last on my cars so yeah its gonna look similar to most. You said all my cars were not properly built and look like shit. Still waiting on your explanation on how they are poorly built too.


I am just proving you wrong.


It is also an ARC spoiler. Mounts to the Factory wing mounts and is lighter weight and more functional.


so its fan boy to have quality parts? interesting. So I guess those SSR's you have make you a fan boy as well then right? According to your logic.


I build my cars to what I like not other ppl. and defiantly don't copy other ppls style like you are doing. I try to be original.

[1on1]

What size are your custom spacers?

Can you provide a photo of your spacers? Also, do you have any suspension parts installed?

msglength......

[5280VertDET]

oh im sorry I didn't realize you had degree in engineering and physics from the university of google. Spacers are as safe as you make them. These spacers were made by a company professionally with a lot of experience making spacers (mostly for 4x4 applications) so I think they know what they are talking about when they sent me instructions to follow, making sure i had enough thread to attach to, proper torque, adjusting and adding lock tite after a certain amount of kilometers. I fail to see how a literal extension of the hub puts any more wear and tear on drive line components than a no spacer wheel would with the exact same offset.

OMFG. I learned this shit 6th grade.

https://www.youtube.com/watch?v=U7WYk1B-lNM

[mhubeny180sx]

this is the KEY problem im dealing with when it comes to cutting fenders, which will not solve anything because the tires are hitting on the mounting points of the bumper (which is just mocked up)

with wheel turned showing contact point
http://i.imgur.com/lTpdOv3.jpg

with wheel turned away to show the point where the bumper attaches to the fender
http://i.imgur.com/imN1zqP.jpg

edit:
I was thinking of adjusting the caster, but i only have about 1/4 inch - 1/2 inch of space back there when the wheels are turned so i don't think it would get me very far

[turbo2nr]

^ pls dioe.

ktnxbye

<3

[OBEEWON]

This cat is making some of yall look real dumb.

[KoukiMonsta]

step one. sell your car
step two. buy a kia

[OBEEWON]

Just to stoke the fire, have you thought about dropping down two sidewall series?

Also, very serious question. Have your spacers been heat cycled and shot peened?

[Sileighty_85]

This cat is making some of yall look real dumb.



Meh... Its 1am, I'm at work and extremely bored.. This is kinda entertaining to me. although not fun anymore when he doesn't answer my questions.

[mhubeny180sx]

Just to stoke the fire, have you thought about dropping down two sidewall series?

Also, very serious question. Have your spacers been heat cycled and shot peened?

I have, yes but...
http://i.imgur.com/vY34Z9x.jpg

nthx

To the serious question, I can't say I have an answer for you, so there is no safe assumption to be made yaknowutimean.

[OBEEWON]

Haha I like you.

[KoukiMonsta]

where did you get dem rimZ?

[blueshark123]

OMFG Just take wheel Spacers the fuck off. Why did you spend so much for spacers is beyond me. Not even if they were conversion spacers would they have cost that much. Are they made of titanium or some shit. You paid 800 for something you can get for 140 and yet you call other people stupid and poor, but you own a shitty 240 still.

[mhubeny180sx]

where did you get dem rimZ?

Too jdm 4u

OMFG Just take wheel Spacers the fuck off. Why did you spend so much for spacers is beyond me. Not even if they were conversion spacers would they have cost that much. Are they made of titanium or some shit. You paid 800 for something you can get for 140 and yet you call other people stupid and poor, but you own a shitty 240 still.

m8 240 hahahhaha kid you think I still try hard to be all jdm by getting a 240 and slapping an sr20 with non functioning ac lol m8, I'm the real deal not like all these posers here "so ahh thinkin of gettin dat rhd conversion to be more jdm with my 2k craigs list special.Im only defending myself, you are gonna be an asshole to me, I'll be an asshole right back, do it way better than you can. Its almost too easy to be honest, but what am I supposed to expect from a crowd of american hoonigan hillbilies that have sat in america all their life and had their brains pumped full of shit. Feel bad tbh.

[KiLLeR2001]

this is the KEY problem im dealing with when it comes to cutting fenders, which will not solve anything because the tires are hitting on the mounting points of the bumper (which is just mocked up)

with wheel turned showing contact point
[IMG]

with wheel turned away to show the point where the bumper attaches to the fender
[IMG]

edit:
I was thinking of adjusting the caster, but i only have about 1/4 inch - 1/2 inch of space back there when the wheels are turned so i don't think it would get me very far

Yep, I've seen that before... You have an extreme amount of full frontal frame damage (FFFD). Did you verify that your numbers were matching before purchasing that car? Looks like you got got m8. Time for a new car or get someone with a truck and some chains to pull on your front end as hard as possible until the space you need is achieved.

[mhubeny180sx]

Yep, I've seen that before... You have an extreme amount of full frontal frame damage (FFFD). Did you verify that your numbers were matching before purchasing that car? Looks like you got got m8. Time for a new car or get someone with a truck and some chains to pull on your front end as hard as possible until the space you need is achieved.

no, there is no damage frontal dmg. the purple paint is actually original as well.

If you wanna talk frontal dmg, check 2 things
1) Your frontal lobe
2) That s15 front end on a stock looking hatch (lol wtf were u thinking maybe when i was 13 i thought that kinda conversion was cool). Thats a write off bruh.

[KiLLeR2001]

no, there is no damage frontal dmg. the purple paint is actually original as well.

If you wanna talk frontal dmg, check 2 things
1) Your frontal lobe
2) That s15 front end on a stock looking hatch (lol wtf were u thinking maybe when i was 13 i thought that kinda conversion was cool). Thats a write off bruh.

http://i.imgur.com/NR5OY5I.jpg

I see you reading my threads, you must be a bored little troll, got your feelings hurt because everyone is pointing and laughing at your ridiculous spacers. Again I ask, do you have a box full of wheel bearings on the ready?

Also, real ballers buy real 1998 Sileighty's. Only 500 were made so better start searching now.

[KoukiMonsta]

you you got got got got m8 m8

[mhubeny180sx]

http://i.imgur.com/NR5OY5I.jpg

I see you reading my threads, you must be a bored little troll, got your feelings hurt because everyone is pointing and laughing at your ridiculous spacers. Again I ask, do you have a box full of wheel bearings on the ready?

Also, real ballers buy real 1998 Sileighty's. Only 500 were made so better start searching now.

When did I say i was a baller lol, its this community that titled me a baller for buying $800 spacers, dont hate the player hate the game. Whats a real sil80, kidsheart made them lol, and by "made" they took a 180sx and slapped fenders, lights, a hood and bumper from silvia, and put sileighty on the rear tail light garnish. you're just mad I got the true jdm, while ur sprayin ether to get ur auto 215sx started lol

edit: why are you watching what i look at lol, dam u creepy son.

[1on1]

What size are your custom spacers?

Can you provide a photo of your spacers? Also, do you have any suspension parts installed?

you must be trolling hard since you've been ignoring this.

[mhubeny180sx]

you must be trolling hard since you've been ignoring this.

I dont understand what the spacer size matters to you so badly, and im tired of repeating myself 1000x spacer/wheel/tire/lug nut/center cap WILL NOT CHANGE, are you gonna conjure up something magical with my spacer numbers??

[silviaks2nr]

Enjoy the rubbing m8. Looks great. This car will be next speedhunters feature I'm sure.

[Kuma]

When did I say i was a baller lol, its this community that titled me a baller for buying $800 spacers, dont hate the player hate the game. Whats a real sil80, kidsheart made them lol, and by "made" they took a 180sx and slapped fenders, lights, a hood and bumper from silvia, and put sileighty on the rear tail light garnish. you're just mad I got the true jdm, while ur sprayin ether to get ur auto 215sx started lol

edit: why are you watching what i look at lol, dam u creepy son.

Is your dad Donald Trump?

[Hoffman5982]

I don't think anyone has said it but I think you're rubbing because of those stupid fucking spacers. Hope this helps

[OBEEWON]

Let us equate spacers to the mamories of a female human for a moment.
As we all know mamories are the greatest object to grace this planet. But there is a point on the 3 dimentional curve of optimization relative to tig ole bitties where the tig oles reach terminal prime bitty. That point we will call 0,0,0. If you travel further up the curve x being mass, y being pepperoni, and z being sag you will see that the bitty begins to sag independent of pepperoni but directly proportional to mass. Pepperoni is a non constant variable relative only to genetic mutation. See the human muscle has an optimal range per mass. Inside this window the bitties can be a tig ole as you like. But once you cross this barrier flacid johnson emerges and it's just weird.

[AKsamuraiS14]

your knowledge seems to amaze me. please tell and show me more...

[PeaceOnesxWai]

^:bowrofl: Dying

[AKsamuraiS14]

Let us equate spacers to the mamories of a female human for a moment.
As we all know mamories are the greatest object to grace this planet. But there is a point on the 3 dimentional curve of optimization relative to tig ole bitties where the tig oles reach terminal prime bitty. That point we will call 0,0,0. If you travel further up the curve x being mass, y being pepperoni, and z being sag you will see that the bitty begins to sag independent of pepperoni but directly proportional to mass. Pepperoni is a non constant variable relative only to genetic mutation. See the human muscle has an optimal range per mass. Inside this window the bitties can be a tig ole as you like. But once you cross this barrier flacid johnson emerges and it's just weird.



lol haha winner winner chicken dinner

[1on1]

I dont understand what the spacer size matters to you so badly, and im tired of repeating myself 1000x spacer/wheel/tire/lug nut/center cap WILL NOT CHANGE, are you gonna conjure up something magical with my spacer numbers??

I want to see and understand why you paid $775 for custom spacers.

Lol at obee

[jr_ss]

I don't think anyone has said it but I think you're rubbing because of those stupid fucking spacers. Hope this helps

No no no, he rubs because he has massive amounts of stupid...

All kidding aside, you're right.

[mhubeny180sx]

can u missle poser kids with 240s pls stop spamming my thread and dreaming you have an og 40k miles (yes i converted it just for you guys), mint, parts-you-wish-you-could-afford 180sx???
Stick to drooling over isis, replicas, ebay, and rotas/xxr/whatever else u flamers are into lol.
It must suck to sit on the internet all day and look at things you wish you could afford.

[1on1]

You still didn't answer two simple questions I asked for.

[KiLLeR2001]

http://i.imgur.com/eNLm28w.jpg

[jr_ss]

can u missle poser kids with 240s pls stop spamming my thread and dreaming you have an og 40k miles (yes i converted it just for you guys), mint, parts-you-wish-you-could-afford 180sx???
Stick to drooling over isis, replicas, ebay, and rotas/xxr/whatever else u flamers are into lol.
It must suck to sit on the internet all day and look at things you wish you could afford.

I remember my first beer... For someone that asked for a mature response, you sure are very immature yourself. I've forgotten what it's like to sit in the basement of mommy and daddy's house playing Xbox all night while eating their food and spending their money. Care to take me down memory lane young one?

You still didn't answer two simple questions I asked for.

Do you really need more fuel for this fire?

[ehhhregartless]

So you're set on keeping the same tires, wheels andspacers. And... if you remove the spacer, the wheels will hit the coilover. And you don't want to change the tire size to reduce rubbing. You can't adjust the suspension much. I got the impression that you want to keep stock fenders. You do have really good research skills pulling info on the haterZ. Have you tried contacting the owner of your inspiration for guidance?

[yomisiu]

get an even bigger spacer so you dont rub

(image repost to help you)
http://i601.photobucket.com/albums/tt95/Arishegayosso/Mobile%20Uploads/IMG_8191.jpg

http://40.media.tumblr.com/5d9b1f78d05e9ad086751eac7c1d579b/tumblr_nryc9pk6J01rohi97o1_500.jpg

stay away from hub centric and wheel centric spacers. they're a scam.

[Hoffman5982]

Too jdm 4u



m8 240 hahahhaha kid you think I still try hard to be all jdm by getting a 240 and slapping an sr20 with non functioning ac lol m8, I'm the real deal not like all these posers here "so ahh thinkin of gettin dat rhd conversion to be more jdm with my 2k craigs list special.Im only defending myself, you are gonna be an asshole to me, I'll be an asshole right back, do it way better than you can. Its almost too easy to be honest, but what am I supposed to expect from a crowd of american hoonigan hillbilies that have sat in america all their life and had their brains pumped full of shit. Feel bad tbh.

Until your sr swap has ac AND cruise control, gtfo.

[mhubeny180sx]

Until your sr swap has ac AND cruise control, gtfo.

SR swap? lol its og sr, no swap m9, 420% jdm.

you think jdm cars have cruise control hahahahhahahahahha?

m8 while u cruisin around trying to stay under 4500 rpm to avoid misfires, im cornering at light speed in the fast lane

cruise control is not jdm at all bro its usdm trash cuz americans lazy.

[Hoffman5982]

I know they didn't come with it. Legit guys go above and beyond. Misfires? Haven't had a single misfire in the 50k+ miles I've put on my swap.

Lol at you criticizing other people's swaps and talking about how great your work is and you didn't even do your swap, you bought the car with it already in there. Great job!

[mhubeny180sx]

I know they didn't come with it. Legit guys go above and beyond. Misfires? Haven't had a single misfire in the 50k+ miles I've put on my swap.

Lol at you criticizing other people's swaps and talking about how great your work is and you didn't even do your swap, you bought the car with it already in there. Great job!

lol yeah im sorry nissan did my sr20 "swap" straight out of the factory lol, my sincere apology.

[Hoffman5982]

Shouldn't be apologizing for that, you should be apologizing for being a twat and talking down to people about their swaps, claiming you're more legit. You aren't more legit. You bought a car with an SR already in it, which takes no effort and gives you no room from criticism, and then you ruined it because you are so far from legit that you didn't follow the most simple rule of proper wheel setups: buy wheels that fit. Not only did you ignore that rule, you also bought terrible looking wheels and then made it 100x worse by spending a retarded amount of money on the dumbest spacers I've ever seen in my life. You fail at literally everything in life.

[Hoffman5982]

I'm both surprised and relieved that you aren't from Florida

[mhubeny180sx]

Shouldn't be apologizing for that, you should be apologizing for being a twat and talking down to people about their swaps, claiming you're more legit. You aren't more legit. You bought a car with an SR already in it, which takes no effort and gives you no room from criticism, and then you ruined it because you are so far from legit that you didn't follow the most simple rule of proper wheel setups: buy wheels that fit. Not only did you ignore that rule, you also bought terrible looking wheels and then made it 100x worse by spending a retarded amount of money on the dumbest spacers I've ever seen in my life. You fail at literally everything in life.

lol you seem mad.

[Almighty So]

im cornering at light speed in the fast lane

[/B]cruise control is not jdm at all bro its usdm trash cuz americans lazy.

usdm trash in a motor that was never produced here :goyou:

http://thefunniestpictures.com/wp-content/uploads/2014/07/so-hard-to-be-an-alpha-male.jpg

[graycob]

Just bondo your whole car together until it's a unibody then you don't have to have bumper mounting points. Then carve 10 pound foam on top of it just like that guy we all saw on youtube and get one more set of spacers. Then you will have race car young man, is that the advice you were looking for?

[mhubeny180sx]

Just bondo your whole car together until it's a unibody then you don't have to have bumper mounting points. Then carve 10 pound foam on top of it just like that guy we all saw on youtube and get one more set of spacers. Then you will have race car young man, is that the advice you were looking for?

well i was thinking about just making a mold of my awesome car to create a unibody shell from it with carbon kevlar infused with versace diamonds kinda like how my dolce and gabanna edition macbook pro is set up.
ty for the tip bro, will make a build thread asap.

btw dont call me young man im 17 years old.

[graycob]

I had a similar idea regarding my own penis once.

[Dat_SilEighty]

mfw this entire thread

https://lh3.googleusercontent.com/-hFSD4zXsRzE/AAAAAAAAAAI/AAAAAAAAAAA/GNc7gj0VCWU/photo.jpg

also Ontario holla

[FaLKoN240]

This thread sucks. mhubeny180sx I'm so happy you decided to recently become an active member of the forum.

Please refrain from posting threads if you're going to be contradictory and condescending when people disagree with your modifications.