PDA

View Full Version : NV Sr20 parts/manley rods/meth kit/Sard FPR/Built motor


Halfamazing
07-11-2015, 07:56 PM
I still have sr20 stuff up for grabs. Prices OBO shipping and PP fees not included. Thanks.

$2250 OBO S14 sr20det built motor

Weisco pistons 86.5mm 9:1
Manley rods
acl bearings
arp main and Head studs
tomei MLS


Head ported and Polished
Supertech dual valve springs and retainers

This motor is getting blowby and needs rings. Still runs though.
http://imagizer.imageshack.us/v2/640x480q90/538/YKuTtn.jpg
http://imagizer.imageshack.us/v2/640x480q90/911/u3lSXe.jpg

$320 OBO Sr20det Manley Rods BNIB. Only opened to look at them.
http://imagizer.imageshack.us/v2/640x480q90/673/1Cc87A.jpg
http://imagizer.imageshack.us/v2/640x480q90/673/XnMvK1.jpg
http://imagizer.imageshack.us/v2/640x480q90/661/acZkWu.jpg

$250 Sr five speed trans with isis short shifter. Shifts great. Has a intermittent grind going into 4th, happens once in a while.
http://imagizer.imageshack.us/v2/640x480q90/908/0GTvyl.jpg

$75 Intercooler core. No leaks or major bent fins. Held boost perfect. Bottom has a little bend from tow truck loading my car a long time ago.
http://imagizer.imageshack.us/v2/640x480q90/901/675b4b.jpg
http://imagizer.imageshack.us/v2/640x480q90/538/cGzbnh.jpg

SOLD $50 CAS worked fine. http://imagizer.imageshack.us/v2/640x480q90/538/JcDs6h.jpg

$75 used SR starter. Worked fine when pulled. http://imagizer.imageshack.us/v2/640x480q90/661/s7T3F7.jpg

$150 S14 sr20det cam gears.
http://imagizer.imageshack.us/v2/640x480q90/540/Uo1ylH.jpg

$65 Sr20 Stock flywheel. 2k miles on resurface.
http://imagizer.imageshack.us/v2/640x480q90/633/XxCFt2.jpg

SOLD $65 SR20 AC compressor. http://imagizer.imageshack.us/v2/640x480q90/540/0P9GVb.jpg

SOLD $70 Sr20 alternator. Worked when pulled fine. http://imagizer.imageshack.us/v2/640x480q90/910/uE8XXj.jpg

$100 Apexi harness adapter for power fc dejetro. model 4E73G015
http://imagizer.imageshack.us/v2/640x480q90/537/Rev8zv.jpg

$250 Devils own water meth kit. Bought from a member a while ago with plans to run with my sards but never did. Really nice kit with progressive controller.
http://imagizer.imageshack.us/v2/640x480q90/661/bCl7az.jpg
http://imagizer.imageshack.us/v2/640x480q90/910/1BuxZU.jpg

$20 purple water pump pulley. http://imagizer.imageshack.us/v2/640x480q90/540/GFdoeW.jpg

$90 Yashio factory water pump pulley. http://imagizer.imageshack.us/v2/640x480q90/910/r4JgNa.jpg

$50 Sr20 fan and clutch . http://imagizer.imageshack.us/v2/640x480q90/540/vRhzuj.jpg

$ 70 Greddy boost control solenoid. http://imagizer.imageshack.us/v2/640x480q90/901/aql0kn.jpg

SOLD $100 Sard adjustable FPR . http://imagizer.imageshack.us/v2/640x480q90/661/9VfeOv.jpg

SOLD $120 S14 sr20det Valve cover painted intense money green. Has scratches on back side from R & R motor without removal. you can't see them with motor installed though. Still looks nice.
http://imagizer.imageshack.us/v2/640x480q90/910/hFLFDI.jpg
http://imagizer.imageshack.us/v2/640x480q90/540/0UmDw4.jpg

Sr20 igniter chips $ 50 each. All work.
http://imagizer.imageshack.us/v2/640x480q90/673/7oSeXY.jpg

$190 Polished s14 sr20det intake manifold, upper and lower with polished TB.
http://imagizer.imageshack.us/v2/640x480q90/910/gbqSAW.jpg
http://imagizer.imageshack.us/v2/640x480q90/673/l36jvG.jpg

$100 stock SR pistons and rods
http://imagizer.imageshack.us/v2/640x480q90/540/x51qoH.jpg

SOLD $300 S14 sr20det block : Was hot tanked / decked/ and honed for reuse of stock pistons. Was used for literally 3 miles and removed and torn down. I recommend having it bored .20 over and using 86.5 mm pistons. This is for a bare block with caps and girdle.

http://imagizer.imageshack.us/v2/640x480q90/538/DcfOAX.jpg
http://imagizer.imageshack.us/v2/640x480q90/673/xZ6yBR.jpg

SOLD $160 Sr20det crank used in stock rebuild. All journals in excellent condition.
http://imagizer.imageshack.us/v2/640x480q90/901/zJSkqQ.jpg

jerry v
07-11-2015, 11:27 PM
What brand is the intercooler? and how much to ship 91910? What's the size of it?

Halfamazing
07-12-2015, 10:09 AM
What brand is the intercooler? and how much to ship 91910? What's the size of it?

It is intense power's intercooler. No name brand. Measures 3inch x 32inch inlet to outlet. Openings are 3inch.

risetovengence
07-12-2015, 01:55 PM
Are any of these parts available for pickup?

Sent from my SM-N900T using Tapatalk

Halfamazing
07-12-2015, 01:58 PM
Are any of these parts available for pickup?

Sent from my SM-N900T using Tapatalk

All can be picked up in Vegas no problem.

Halfamazing
07-13-2015, 05:33 PM
Bump it up! You buy now

Z32TwinTurbo
07-13-2015, 07:11 PM
Do you have a s14 sr maf?

Halfamazing
07-13-2015, 09:35 PM
Do you have a s14 sr maf?

No maf as i used a map sensor tune.

95s14zenki
07-14-2015, 03:00 PM
is the crank still stock? or was it polished by a machine shop for larger bearings?

Halfamazing
07-14-2015, 03:40 PM
is the crank still stock? or was it polished by a machine shop for larger bearings?

Stock, and polish is different from grinding to resize for bearings.

JAStirrett
07-14-2015, 04:24 PM
Do you happen to have the A/C line that goes from the compressor to the first hookup going behind the engine?

Halfamazing
07-14-2015, 04:36 PM
Do you happen to have the A/C line that goes from the compressor to the first hookup going behind the engine?

I have the low pressure line, but I'm holding it for a friend.

JAStirrett
07-14-2015, 05:01 PM
I wasn't sure which one it was, I haven't A/C in so long! Thanks though...

Halfamazing
07-15-2015, 09:30 PM
CAS sold, Valve cover sold.

will9408
07-15-2015, 11:44 PM
Do you have drive shaft you for sale?


Enviado desde mi iPhone utilizando Tapatalk

Halfamazing
07-16-2015, 07:06 PM
Do you have drive shaft you for sale?


Enviado desde mi iPhone utilizando Tapatalk

I do have it , s14 non abs drive shaft but I don't know about shipping.

vw203
07-18-2015, 07:59 PM
How much to ship crank to 06512 ct?

Halfamazing
07-18-2015, 08:48 PM
How much to ship crank to 06512 ct?

Pmed you bro

Halfamazing
07-20-2015, 09:27 PM
Still have stuff for sale

Halfamazing
07-21-2015, 09:55 PM
Up papapapapap

Halfamazing
07-23-2015, 06:25 PM
Alternator and A/C compressor sold. Lets get this other stuff sold.

Halfamazing
07-30-2015, 05:53 PM
Block and Crank sold

SidewayzAsFck
07-31-2015, 06:35 AM
Interested in meth kit

Halfamazing
07-31-2015, 09:44 AM
Interested in meth kit
Cool lets deal. Pm me any questions you might have. Thanks.

Hustler5
08-01-2015, 05:32 PM
Intercooler still Available?

Halfamazing
08-01-2015, 06:16 PM
Intercooler still Available?

Yes I still have it.

Halfamazing
08-02-2015, 09:09 PM
Sard FPR sold!