ferrero
07-08-2015, 11:08 AM
what I have up for grabs is a 0 Mile fully rebuilt sr20det redtop
I have all the paperwork from the time it was imported to all the receipts for the build.
here we go
Red top s13 sr20
-0 miles never ran since build.
- Supertech 9:1 Forged pistons
-.020 overbore
-Fresh hone
- Fresh block decking
-Cometic Head gasket
-ARP head studs
-3 angle valve job
-Head decked
-New valve seals
-Brian Crower stage 2 cams
-Brian Crower Stage 2 springs
-Brian Crower Titanium Retainers
-New oil pump
-New timing chain/ guides/ tensioner/ Gears
-New Adjustable Cam gears (set properly to the cam card)
-New Water pump
-New NISSAN Crank bearings.
-New NISSAN Rod bearings
-Polished crank journals (ALL WITHIN NEW SPECS)
-Polished Rod Journals (ALL WITHIN NEW SPECS)
will come with
-Engine
-Trans
-ECU
-Z32 MAF
-Cam Angle sensor
-Harness
-Starter
NO TURBO/EXHAUST MANI/ INJECTORS
PRICE-3300 OBO
if need be I have a stock t25 and mani I can let go with it.
I also have a used MISHI rad and an no name IC with some pipes I can let go if the price is right.
Shawn.
(386)-344-4194
Lake city FL
im sure im forgetting a few things. but that's what I can remember at the moment.
I have all the paperwork from the time it was imported to all the receipts for the build.
here we go
Red top s13 sr20
-0 miles never ran since build.
- Supertech 9:1 Forged pistons
-.020 overbore
-Fresh hone
- Fresh block decking
-Cometic Head gasket
-ARP head studs
-3 angle valve job
-Head decked
-New valve seals
-Brian Crower stage 2 cams
-Brian Crower Stage 2 springs
-Brian Crower Titanium Retainers
-New oil pump
-New timing chain/ guides/ tensioner/ Gears
-New Adjustable Cam gears (set properly to the cam card)
-New Water pump
-New NISSAN Crank bearings.
-New NISSAN Rod bearings
-Polished crank journals (ALL WITHIN NEW SPECS)
-Polished Rod Journals (ALL WITHIN NEW SPECS)
will come with
-Engine
-Trans
-ECU
-Z32 MAF
-Cam Angle sensor
-Harness
-Starter
NO TURBO/EXHAUST MANI/ INJECTORS
PRICE-3300 OBO
if need be I have a stock t25 and mani I can let go with it.
I also have a used MISHI rad and an no name IC with some pipes I can let go if the price is right.
Shawn.
(386)-344-4194
Lake city FL
im sure im forgetting a few things. but that's what I can remember at the moment.