FS: Work Equip 19x8/9, et51/58, 5x114.3

[Vten]

all original never been split apart, great condition Work Equip staggered wheels in 19x8 et51 w/ falken azenis 225/35/19 tires fronts and 19x9 et58 w/ yokohama S drive 245/135/19 tires rears in 5x114.3 bolt pattern, comes with the original work valve stems w/caps too


wheel#2 has a minor curb, front tires are about 5/32 on the middle thread, but shown a camber on the inner side , rear tires are about 6/32, slightly minor camber as well, not that bad.


$1500 firm for them, open for a trade (I need to receive the other party wheels first before shipping mine) with a real non replica wheels setup, 3pc and ccw brand is preffered in 17 or 18s ... will ship at buyer expense. im in Columbus, ohio ... shoot me PM ,email to dwitan at yah00 or txt to 61four-5nine8-17fivefour for any questions .


thx guys ,
Tan

http://www.ft86club.com/forums/attachment.php?attachmentid=113294&stc=1&d=1434990160

http://www.ft86club.com/forums/attachment.php?attachmentid=113295&stc=1&d=1434990160

http://www.ft86club.com/forums/attachment.php?attachmentid=113296&stc=1&d=1434990160

http://www.ft86club.com/forums/attachment.php?attachmentid=113297&stc=1&d=1434990160

http://www.ft86club.com/forums/attachment.php?attachmentid=113298&stc=1&d=1434990160

http://www.ft86club.com/forums/attachment.php?attachmentid=113299&stc=1&d=1434990160

http://www.ft86club.com/forums/attachment.php?attachmentid=113300&stc=1&d=1434990160

http://www.ft86club.com/forums/attachment.php?attachmentid=113301&stc=1&d=1434990160

http://www.ft86club.com/forums/attachment.php?attachmentid=113302&stc=1&d=1434990160

http://www.ft86club.com/forums/attachment.php?attachmentid=113303&stc=1&d=1434990160

[Vten]

Open to a reasonable offer

[Vten]

Bump bump bump

[Vten]

Up up up need them gone

[Vten]

Trade me or buy me

[Vten]

Lowered price to $1500 , it's a steal guys !

[Cartoon]

What are the disk size?
Do they clear BBK?

[Vten]

I'm not sure what size of disc they are ... It doesn't show on the label and behind the spokes.

The wheels was used in a S2000 with a stock brakes , not so sure about bank clearance ... But looking from the offsets , it doesn't seems to clear.