PDA

View Full Version : FL Nissan R200 Final Drive Ring & Pinion Gear Set 3.692 (48:13) Ratio


KiLLeR2001
07-01-2015, 07:06 PM
Nissan Infiniti 240SX 180SX SILVIA SKYLINE 300ZX Q45 R200 Final Drive Ring & Pinion Gear Set 3.692 (48:13) Ratio.

If upgrading from a stock 4.083 ring gear from a 240sx this gear set will give you a higher top speed. Ideal for cars putting down more power that would like to cruise on the highway at lower RPM. This is the same final drive gear ratio as an S15 Nissan Silvia Spec-R.

Comes with LH and RH shims and ring gear bolts.

http://tehl33tsite.com/240sxdd/fs/diffs/3692/IMAG2964.jpg

http://tehl33tsite.com/240sxdd/fs/diffs/3692/IMAG2965.jpg

http://tehl33tsite.com/240sxdd/fs/diffs/3692/IMAG2957.jpg

http://tehl33tsite.com/240sxdd/fs/diffs/3692/IMAG2958.jpg

$240 shipped.

If you have any questions or looking for another gear set ratio please let me know. PM for quickest response.

SR20PWRALTY
07-03-2015, 01:47 AM
What will be needed to put in J30 diff?

KiLLeR2001
07-03-2015, 06:06 AM
You will need to swap the pinion washers, spacer, and bearings off of the J30 pinion gear onto this one. Once that is done you press it into the pumpkin. Once ring gear is installed onto a diff, use the shims to position it onto the pinion gear. Always be sure to verify backlash.

KiLLeR2001
07-03-2015, 11:39 AM
This has been sold!