PDA

View Full Version : FL Built S14 SR20DET Notchtop Partout--BC//CP//Eagle

Hoffman5982
06-29-2015, 02:35 PM
I am parting with my spare motor as I am extremely indecisive and have decided to go a different route. History of the motor is as such: Friend had the motor built, drove the car for about 3k miles, sold it to fun his drift project, and the new own immediately pulled it to go v8. It sat in his shop for a little while and the I bought it. Now I don't want it. All parts sold as is.NO TURBO

I have not disassembled the bottom end, but everything else is off and looks great.

All prices are obo. Shipping is offered at buyer's expense, and buyer also pays paypal fees. I will ship most things USPS priority.


S14 SR20 Bare Block--$300SOLDD!; Was hot tanked, decked, and honed. The deck looked perfect, and the crosshatches are still visible in the cylinder walls.

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150702_191051_zpsqv6srxc7.jpg
http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150702_191200_zpsz6mwc3k2.jpg
http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150702_191209_zpse03k59xz.jpg
http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150702_191145_zpswh70s3iz.jpg


New S14 SR20DET Oil Pump--$115; 3k miles on it. It was painted with high temp aluminum paint along with the block.

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150702_190345_zps5vdytmnu.jpg
http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150702_190405_zpsdcjlg9dp.jpg

CP Pistons & Eagle Rods--$500SOLD!!; Pistons are standard bore and 9.0:1 compression ration. These are practically new, have a little bit of carbon on top. No spun bearingsedit:These pistons look great. I wiped them off and a lot of the carbon came off. I worked a little more on piston 4 and it looks brand new. Skirts look amazing.

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150702_194418_zpszjkqtnjt.jpg
http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150702_194454_zpskbcrtblu.jpg
http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150702_194600_zpsikjbfdyv.jpg
http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150702_194611_zpsfvc4omhl.jpg

SR20DET Crank--$165Sold!!!; Excellent condition

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150702_195033_zpsqvmussg7.jpg

SR20DET Crank Pulley--$35; cheap because there is a chip on the outer lip. This will not affect performance

S14 SR20DET Built Head--$375; Head was hot tanked and decked. Has Brian Crower Titanium Retainers and Springs(BC0200 kit), and new OEM valve seals.Includes the cam caps, squirters, lifters, and rocker arms. The valve shims were removed and labled so that they go back in properly.

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150702_202918_zpszobmkrih.jpg

ARP Head Studs--$90SOLD!!; Torqued only once. In original box

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_112442_zpsn2izywo0.jpg
http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_112510_zpsjq6swglm.jpg
http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_122828_zpsfebe67wi.jpg


ARP Main Studs--$90; Torqued only once. In original box

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_112448_zpsujypprqi.jpg
http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_112456_zps48mucukz.jpg

S14 SR20DET OEM Cams--$35; Excellent condition, no cam gears.

S14 SR20DET Intake Manifold--$80; Complete with throttle body. Does not include IACV or throttle cable bracket. Includes working CTS

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_125723_zpsyrxqmodc.jpg
http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_125737_zpss3ufvrtt.jpg

S14 SR20DET IAC--$45

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_125753_zpsorpeeig7.jpg

S13 SR20DET Turbo Manifold--$35SOLD!!

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_125128_zps2tqv3ez6.jpg
http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_125135_zps9zwcsgp9.jpg

SR20DET OEM Flywheel--$55; Great condition. A little bit of surface rust from sitting, but otherwise perfect.

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_125109_zpsgjc01zho.jpg

S14 SR20DET Water Neck--$40; Great condition. Includes temp sender thing.

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_124946_zpshzbpbfi5.jpg

S14 SR20DET CAS--$90SOLD!!; Perfect condition.

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_124917_zpsj71oealo.jpg
http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_124923_zpsxev4ltqv.jpg

S13 SOHC MAF w/ Filter Adapter--$35SOLD!!

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_124725_zps7urbalnw.jpg
http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_124904_zpsrb29qw5q.jpg

S14 SR20DET Fuel Rail w/ FPR--$45; Great condition. Includes injector caps as well.

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_124702_zpsqij8lutk.jpg

S14 SR20DET FPR--$30; This is a spare, not from the rail above.

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_125808_zpss1wktmks.jpg

S14 SR20DET Valve Cover--$110Sold!!!; It has been painted, but wasn't a very good job. Great condition otherwise.

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_130015_zpssn8lebuu.jpg

SR20DET Coil Packs--$70; 3 are in excellent shape, the forth is also in good shape but missing the boot, so it's free. Includes great condition subharness

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150629_130137_zpsslkc1nib.jpg

SR20DET Upper Oil Pan--$30; Have 2 of these.

SR20DET Lower Oil Pan--$40SOLD!!; Not dented

http://i68.photobucket.com/albums/i40/hoffman91/SR20DET%20Partout%20v2/20150702_195343_zpsu6gu6xyj.jpg


If you don't see something, feel free to ask. Once I take apart the short block I'll update the missing pictures and add to the list. Feel free to ask any questions and/or make offers.

Thanks for looking.
Quesadilla
06-30-2015, 09:33 AM
I'm interested in the manifold. I'm also definitely not in Florida too so I can pick up if you're not too far
Driftzenki
06-30-2015, 09:51 AM
whats the bore on the cp pistons and would you part them?
Hoffman5982
06-30-2015, 01:57 PM
I'm interested in the manifold. I'm also definitely not in Florida too so I can pick up if you're not too far

Intake manifold or exhuast? And I'm located in Pensacola

whats the bore on the cp pistons and would you part them?

Derp, can't believe I forgot to post the specs.

The pistons are standard bore and 9.0:1 c/r. Atm I'm not looking to separate but I would if someone showed interest in the rods.
Hoffman5982
07-01-2015, 12:01 PM
To the top!
Hoffman5982
07-02-2015, 08:50 AM
Bump feel free to make offers!
Quesadilla
07-02-2015, 08:58 AM
Do you have the stock oil catch can with hoses?
Hoffman5982
07-02-2015, 10:16 AM
I wasn't aware the s14 sr's had oil catch cans from the factory
Hoffman5982
07-02-2015, 10:28 PM
I disassembled the bottom end today and was very impressed. Everything looks immaculate. Better pictures have been uploaded. Also realized a couple of parts weren't what they appeared to be and updated the info.

Feel free to shoot me some offers, but be reasonable. I'm motivated to sell.
Kingtal0n
07-03-2015, 12:03 AM
When you say standard bore, are they standard bore undersized to fit the OEM clearance, or standard bore with requires boring to the larger piston/wall clearance required by forged pistons?
Hoffman5982
07-03-2015, 12:11 AM
When you say standard bore, are they standard bore undersized to fit the OEM clearance, or standard bore with requires boring to the larger piston/wall clearance required by forged pistons?

Standard bore as in 86mm, same as stock
Hoffman5982
07-03-2015, 11:49 PM
To the top!
Hoffman5982
07-06-2015, 12:23 AM
Someone spend money. Money spendin is gooooood
Hoffman5982
07-06-2015, 03:23 PM
Bump to the top!
Hoffman5982
07-07-2015, 11:50 AM
I've had a couple of nibbles, but no bites. Please remember everything is obo!
Hoffman5982
07-08-2015, 10:31 AM
Oil pan sold. Please remember that if you'd like more pictures of something, you just have to shoot me a pm and ask!
Hoffman5982
07-13-2015, 12:04 AM
Bump, still have most of this. Crank is pending sale
Hoffman5982
07-14-2015, 03:28 PM
Bump, pistons/rods may be pending sale
kyle1a2
07-15-2015, 02:27 PM
Bump, oil pan showed up today in great shape. Excellent seller!
Hoffman5982
07-16-2015, 02:18 PM
Bump, oil pan showed up today in great shape. Excellent seller!

Thanks!

Lower oil pan and pistons/rods sold!
Hoffman5982
07-18-2015, 04:20 AM
Maf sold, both vtc gears pending
Hoffman5982
07-19-2015, 12:58 PM
I guess the crank is no longer pending, neither are the vtc gears. To the top!
KiLLeR2001
07-19-2015, 01:35 PM
Good stuff here.
Hoffman5982
07-20-2015, 07:49 PM
^Thank you sir

To the top.
TheRealSy90
07-21-2015, 08:47 AM
Willing to ship upper oil pan? If you can verify that none of the threaded holes are stripped.
Hoffman5982
07-21-2015, 05:53 PM
Willing to ship upper oil pan? If you can verify that none of the threaded holes are stripped.

Yes. Give me a day or two to get you a shipping quote for you I'll PM you when I do
Hoffman5982
07-23-2015, 01:58 AM
1 VTC Gear and Solenoid SOLD! Crank is back to pending status. The RealSy90 I haven't forgotten about you, I just haven't been able to get out to ups or usps for a quote.
Hoffman5982
07-25-2015, 10:38 AM
Crank sold, block pending
mreid
07-25-2015, 11:38 AM
I messaged you some time ago about the block. If it doesn't go, I'll still take it immediately.
Hoffman5982
07-26-2015, 06:27 PM
I'll let you know. I have a guy that has been planning to grab it on the 31st. If it falls through you'll be the first to know
S14kouki805
08-04-2015, 01:46 PM
PM sent, msg length
DweezyFL
08-06-2015, 12:24 PM
Crank gone?

Sent from my SM-G900V using Tapatalk
Hoffman5982
08-07-2015, 11:49 PM
Crank gone?

Sent from my SM-G900V using Tapatalk

Crank sold last week, sorry

Block deal fell through after holding it for a month. No longer holding anything.
Cdawg240
08-08-2015, 08:28 PM
Still have the fpr?
Hoffman5982
08-16-2015, 03:31 PM
Still have a lot of this stuff!
Hoffman5982
08-19-2015, 03:33 PM
Bump it up!!
jayfulton
05-07-2016, 11:43 AM
If you still have this block I would like to buy it.
Hoffman5982
05-07-2016, 08:52 PM
Sorry, I sold that a while back
hanzbrady
05-07-2016, 10:58 PM
I know this is an old thread but since someone else bumped it already, but do you by chance still have that crank pulley?
Hoffman5982
05-07-2016, 11:43 PM
Yes I do. I updated it to reflect everything that sold
stealthmode1216
05-20-2016, 04:51 PM
PM sent, interested in the head..
iPhantom23
06-10-2016, 06:54 PM
Do you still have the s14 water neck?