Project HNR32 4 Door Build!

[Sileighty_85]

Another Project.....? Ok I think I have a problem.

Picked this up to use as a fun family car. I refuse to own a FWD POS car that I have no idea about so I figured id buy a car I know everything about.

This is a 1991 HNR32. Its AWD, Turbo, 5 Speed. Kind of a Unicorn, I have not seen many with the whole package.

The plan is once I get it back to the states Im gonna do a basic rebuild on the GT-R's old RB26 engine and slap in this car. Making it a Mini GT-R hahah.

So hopefully it all works out.


This thing needs a good bit of work though. Seems to have been neglected for a while, but not shabby for $2K.

Front Axles need rebuilt, Rack and pinion Boots are torn, carpet needs to be replaced, Tach is inop, all the lights need replacing...ect

I want to do a GT-R interior swap on it, so F&R seats and maybe the carpet if it'll fit.

Came with Tein Flex Coilovers for a GT-R, RB25 Turbo, HKS Front Mount, Nistune ECU W/ consult cable and software, GReddy MBC, some ugly 17X8 Wheels, Recaro Driver Seat, and a Fujitsubo Exhaust.

First Priority is getting it mechanically sound so I get it JCI'd and drive it.

Just got dropped off on Tuesday

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/Body_zpsgdhmxzbl.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/685046C1-1C8B-43C0-929B-3E20C8ABAE67_zps81hbgdtl.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/22338BE6-2E10-4915-BF18-554606A1A5CB_zpsgar4v9sn.jpg

Seems someone tried to run the Stock BOV Atmospheric, which wont work with Stockers. So had to fix that with some extra hose in the trunk. Really Surprised the car ran since the BOV vents at idle and the Recirc tube was not capped.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/37C51ADD-5F5E-4A0A-8C08-5E54362F7B61_zpstsco2bs9.jpg

Chassis is in pretty good condish minus some kinda fuckery with the front right tow hook area. Not sure what happened here but damage seems minimal. I should be able to pick up that section from Nissan and have a shop fix it later. And a Dent is the Right rear Quarter panel. Probably just buy a new one from Nissan.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/CE9EAF37-16CB-4EBE-80B6-29E5C9FC62A3_zps9xhpsdaj.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/11160280_10204014502355062_282805856_n_zpsxqaakqby .jpg

Upgrades and Down Grades lol Got alot of better quality spare parts lying around so gonna swap those out and try to sell the old ones to help make back some money from buying it.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/753CAA19-09D8-4080-AF66-D1CAA01BE379_zpscsfgfi35.jpg



While I was changing the wheels I did some preventive maintenance on thw inner wheel wells to protect against rust. While doing so I came across this.... a make shift harness guard... from a Mt Dew can with razor sharp edges...

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/95FC6DE6-B587-4F32-B3FE-A750DD91E83C_zpsqavbilhm.jpg


There was a whole lot of Poor wiring going on under the dash. Dash wiring is a big peeve of mine, So i ripped all that shit out.

Dude had twist ties holding wiring up... and a shit ton of splices. Think I saw 2-3 splices on the Cig lighter LIGHT....thats like a 30g wire!

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/693252A0-AF9D-42CE-9610-B9A560F40A0C_zpsggkxh85h.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/6B231C66-244A-4332-AB9D-D47DA6EB8057_zpsjb4qob8f.jpg

Turbo Timer ebrake sense wire....

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/4646F8D2-963B-4FFB-8243-72D571A8D400_zps15km4nst.jpg

Swapped out the Fujitsubo exhaust for the Apexi one off the GT-R

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/5F2874BB-E867-410F-B161-9699A30EF4CC_zpsfhqm4iue.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/FAC08070-EF37-4600-896C-2708E13C4825_zpsgmteunup.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/A5B19DF5-B009-4947-99F6-3A42AA5C892E_zpsehf8vdtr.jpg

Gotta order more parts now :/

[greenwood]

Neat to see what is over in Japan! thanks for sharing!

[supersayianjim]

how much did you pick this up for, and you are going to ship these back right?

[IIIXziuR]

Nice! I am glad you made a thread just for the 4-door.
This was a cool purchase and the fact that this is and AWD version is sweet!

[Sileighty_85]

how much did you pick this up for, and you are going to ship these back right?

Got it for $2,000


Yes, I intend to bring it back with me if everything works out.


Nice! I am glad you made a thread just for the 4-door.
This was a cool purchase and the fact that this is and AWD version is sweet!

Yeah pretty excited for it. Really cant wait til I can drop the RB26 in it lol

[future]

Your land lord in the US doesn't get mad at all your cars?

[Sileighty_85]

Your land lord in the US doesn't get mad at all your cars?

They are all in storage right now.


Next base hopefully will be in a area I like (Hopefully Florida) so I can buy a house and do what I want lol

[future]

Your going to need a 10 car garage lol

[Sileighty_85]

No kidding, I almost contemplated on selling one of my cars.....but not sure I could do it.....





Got my hands on some GTR seats locally


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/GTR%20Seat2_zps64m4fow4.jpg

[IIIXziuR]

I guess being that this already is an AWD spec, the RB26 should drop in without much hassle?

[Sileighty_85]

I guess being that this already is an AWD spec, the RB26 should drop in without much hassle?


Yup should drop in and bolt up. Wiring will be different but I think i might just get a GTR Chassis harness and swap that in as well, If i can get my hands on it cheap.

[future]

Seats need a good cleaning!

[TWest]

No kidding, I almost contemplated on selling one of my cars.....but not sure I could do it.....





Got my hands on some GTR seats locally


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/GTR%20Seat2_zps64m4fow4.jpg

Those things are filthy! haha.

Man, all that wiring makes me cringe. Soldering takes like 30 seconds, no excuse for sloppy wiring. At least its in good hands now. What are your plans for paint?

[Sileighty_85]

Seats aren't as bad as the pic shows, the seats are like suede so the fibers direction and lighting makes it look really dirty.


but they will still get cleaned.


With these I wanna experiment and see if I can disassemble the top section and swap it with the passenger to make a like new seat.


Not sure on paint, but thinking either a light Silver or White.. really not sure though

Slowly collecting parts for the RB26 swap.

Picked up a Power steering reservoir from a GTR as the hot pipe cuts into the non GTR ones.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/5BE28049-4880-408C-8E83-105070D26690_zpsswbuoqix.jpg


Also got a hard piping kit with another turbo hot pipe
http://i73.photobucket.com/albums/i235/Neil_85/GTR/9C492DCB-0E5D-4FD1-AC6F-6898F24FAC0A_zpsc0wbvyhu.jpg


http://i73.photobucket.com/albums/i235/Neil_85/GTR/AE9298EC-78CD-4588-A9B0-E9698C881154_zps2gl7efp8.jpg


and some R34 Turbos with R34 elbows.
http://i73.photobucket.com/albums/i235/Neil_85/GTR/5F2F72A4-2983-403E-B098-28CADFE98E26_zpsisxlfvoq.jpg


once the car get JCI'd I can slap these on
http://i73.photobucket.com/albums/i235/Neil_85/GTR/FAB4489B-2B75-4A56-B41E-3AFF41995E25_zpss7lodnql.jpg

[dukiespice]

Sweet! very excited to see this build

[Sileighty_85]

Just bought a GT-R Carpet, Hopefully it fits, cant really find much on the subject other than hearsay. but seeing as how the chassis are the same length and width it should fit

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/GTR%20carpet_zpsvdaoxvyd.jpg

Picked up the seats tonight as well.

Tried cleaning them a bit but the stains seem very stubborn. I was gonna swap the drivers seat for the one in the GTR but the color contrast would be really off so they both will go in the 4 Door and deal with it later
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/92646731-1C74-4304-B219-97E368EF123A_zpstxrihsmb.jpg

[JIMB0]

Cool to see another 4 door R32 build!

[Sileighty_85]

Cool to see another HCR32 build!

Thanks, yeah cant wait to drive it.l

[JIMB0]

corrected lol

[izzy-]

awesome stuff

[Sileighty_85]

So it seems the time has begun to where its sunny Monday-Friday and Rains on the Weekends.

So was able to get some work done before work.

First had to replace the torn shift boot since it was leaking everywhere and stinking up the cabin. Lucky Im a pack Rat and kept the GT-R's old shifter.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/FFA55CBB-F962-49C3-BDD2-BDDB02704CB5_zpsgtrban51.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/A615330F-E6BB-43D2-B25E-F48AB528D18C_zpsu0tnzo2i.jpg

yey
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/897A363D-7204-4997-A61E-5743A712DDFB_zpsdxtn7ntc.jpg

Not a fan of that shift knob so installed the most awkward shift knob ever, The NAVAN

(The shift boot will replaced soon)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/F53B8D0B-394C-4E38-AC33-0EF032CC0ECF_zpsud56ywvv.jpg

Since Im going for a GTR interior feel, I installed a spare Triple Din. Not hooked up right now but will when I install the 26

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/2210EB03-CF47-4877-AAA6-28B6D15E66E3_zpscp8uzbil.jpg

Need to get some GTR radio brackets since the Non GTR's has a different setup.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/2BCF7BF5-9F97-46E9-B2BD-1C7574C4E7EC_zpsyjvoq3os.jpg

Got the seats installed as well. Didnt like how the stock seats felt. Made me feel like I sat high. So the GTR seats make it feel much more sporty.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/C3E6C0D4-E410-41C2-A294-75DC621FD638_zpsgdi0jmup.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/8EE93323-8F46-4F7E-B292-44DF9B8C134C_zpsmeggg4lv.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/F1C1CC20-605A-442A-B544-E6CCD9D3C986_zpsztig053d.jpg

Of course the carpet came in after installing the seats so now I get to rip them out again.

Also had a spare RB20 down pipe laying around and got that installed

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/FE5FB3D5-644D-4B9F-9420-D862CBA61809_zpsgy2avt0h.jpg

as she sits right now.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/B0BB3415-7A12-48AD-9024-6606FADECD6E_zpsujloroas.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/1341B123-CDAA-40EE-A152-5D8AADFCDD61_zpsajlvvyhp.jpg

Exciting shit I know....

Need to order the front axles boots so I can rebuild them.

[AzS13hatch]

Those seats cleaned up very well. Loving the car thus far

[spooled240]

Yup should drop in and bolt up. Wiring will be different but I think i might just get a GTR Chassis harness and swap that in as well, If i can get my hands on it cheap.

is the awd trans the same as the 26? I imagine it being a lot weaker than the gtr


cool build so far

[Sileighty_85]

not sure about internal gear sizes but externally they are the same. Im thinking the main diff is gear ratios.

[TWest]

The RB25/26/Z32 all use the same gears, forks, bearings, synchros IIRC.. and pretty sure the RB20 and S13 or S14 share internals.. could be wrong but I'm almost certain that's what I remember.

[Sileighty_85]

The RB25/26/Z32 all use the same gears, forks, bearings, synchros IIRC.. and pretty sure the RB20 and S13 or S14 share internals.. could be wrong but I'm almost certain that's what I remember.



You are correct in regards to the RB25/26/Z32 and the RB20, SR/KA trans Being this is a RB20 AWD tranny....Not sure.




So was only able to get the carpet swapped out today :/


But if anyone wants to know, a GTR carpet fits perfectly in a 4 Door AWD model.


Seems the carpets are pretty much the same dimensions with minor differences.


So carpet looked like shit, mainly on the driver side.


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/DC62C719-4701-4626-9AAF-4F10F1B00931_zpsdoleamnx.jpg


Got it all ripped out


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/5FA8D6A0-6016-4558-9E98-BB1FDF7C9DC6_zpsmpx3jpvw.jpg


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/50CB40C7-26DD-422D-A799-5865F439EEE4_zpsxpcakdqd.jpg


to find out the gear oil was leaking into the interior from the torn boot. So that explains the smell. it soaked into the padding so its a good thing im replacing the carpet.


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/03A9D3EE-335F-46F1-8680-4DDA6BA8EE9E_zpszqcqbu9u.jpg


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/4B5DE132-B589-4575-ACEC-86745F128B52_zps5sq4brgc.jpg


Out with the old


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/484E6CF7-6023-4E4F-9FA4-EAD169D008FB_zps4gnlk4cf.jpg


In with the new
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/557F1444-4534-464C-AC40-B6E0BA6F3DFF_zpshlnhevxi.jpg


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/A1B2129E-C17E-4EDC-930A-E759A5C304D9_zpsgdlyfnki.jpg


Only thing I had to do was cut a new hole for the GTS4 seat belt mounting point
and trim the white edge "keepers"


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/ED793070-EEB4-4312-8F90-D53740205C4A_zpsdebdrv9y.jpg


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/FF5B02FE-3141-4E06-8E64-AB9BE2B50922_zpsrhqbci9h.jpg


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/B5B1A5D4-2F2F-45A2-8032-0684FE944083_zpssjuuzxqa.jpg


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/35720167-16DD-4415-98B0-D81A9D3E679B_zps756favtx.jpg


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/F2E8ED4B-00F6-466C-A24D-E48114A048B3_zpsscaqmpvt.jpg


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/FDD26E9B-FEB2-45A6-8453-ACB3D8AF46DB_zpsmwkkr1zv.jpg


Done


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/B4AA2B37-6110-4CF3-8B1C-B67251D15C92_zpsuhmbnqvd.jpg


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/0CDEB453-28FB-4E24-8032-6B31E835A48D_zpsmp1jvagp.jpg

[future]

Looking good. New dash next?

[Sileighty_85]

Looking good. New dash next?

Domo.

Depends, only about 20% of R32 dashes dont have the bubble and 50% dont have the dick veins in them. so to find a non fucked one is equivalent to finding a non cracked S13 dash....

[supersayianjim]

Just bought a GT-R Carpet, Hopefully it fits, cant really find much on the subject other than hearsay. but seeing as how the chassis are the same length and width it should fit

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/GTR%20carpet_zpsvdaoxvyd.jpg

Picked up the seats tonight as well.

Tried cleaning them a bit but the stains seem very stubborn. I was gonna swap the drivers seat for the one in the GTR but the color contrast would be really off so they both will go in the 4 Door and deal with it later
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/92646731-1C74-4304-B219-97E368EF123A_zpstxrihsmb.jpg



my man, you need to remove the skins toss them in the washing machine then they will look good.


before




http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/loadup2_zps8e6fe3dd.jpg








during


http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/tightskinnohogrings_zps0eb82936.jpg








http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/gtrseats5_zps5917035e.jpg




after




http://i1062.photobucket.com/albums/t493/supersayianjim2/project%20s-rb%202/mountedneedstabwork_zps75649d25.jpg

[supersayianjim]

and how the hell does a 2 door coupe have the same carpet as a 4 door sedan?(scratches head)

[Sileighty_85]

my man, you need to remove the skins toss them in the washing machine then they will look good.


Thought about it but worried about the foam chunking as I removed the skin and didnt wanna have divots from the missing foam areas.

When I get it back to the states ill get them steam cleaned or whatever.

Im on a time crunch over here to dont wanna spend too much time on one thing.

When I return I can tear stuff apart and do it better to my liking.


and how the hell does a 2 door coupe have the same carpet as a 4 door sedan?(scratches head)

Its the exact same Chassis/frame. Kinda like the S13 Silvia vs 180sx, the body is different but uses the same frame and floor pan.

[Salvarath]

I've used a tool to detail interiors of cars I've flipped, and the seats especially have came out really great. I watched this tool remove blue ink from the carpet of an 05 dodge dakota I'm flipping. The tool is called a Tornador Car Cleaning Gun Tool. It costs around $130 USD. It whips air and cleaner into the fabric and shoots the dirt off of the surface. You have to learn how to use the tool well, you can't really half-a$$ it, otherwise it doesn't work that well. Also it needs a rather large air supply to keep it going, I found that it works most efficiently at a constant 100 psi. My compressor wasn't able to keep up with the job because of a leak but I would charge it to 100 psi and use it until 60 psi. Which was around a minute's worth of use. lol Overall though, it worked way better than I ever imagined.

[Sileighty_85]

^^Thanks man Ill look into that when I get back to the states.





Damn, accidently created a post while doing some pic stuff. Cant delete.... Sorry guys for the trickery.





Nothing big to report

Replaced the Rack and Pinion Boots.


Installed a stock ECU so I can possibly sell the NISTUNE ECU to make some money back off of this car.


installed RB20 W/G actuator, Seems to have a misfire when boosting, need to install boost gauge to find out how much to diagnose better


Other than the misfire it drives pretty good

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/F8AD84AC-D2F0-4CEE-A032-A8BF077327D7_zpsvsldcctf.jpg


Awaiting on the axle boots to arrive so I can rebuild them.




Interior is almost done. Just need back seats, center dash vent, Newer steering wheel (Got a Tomei im gonna install) GTR Gloss Black radio/shifter trim and some other little BS stuff.


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/77B8C2DB-292B-4200-BA86-9D71B31354CD_zps0llsdufd.jpg


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/70C7E995-BE73-4D06-912A-322672C7F2C5_zpskcympvue.jpg

[10psitx]

The car is comming along well, i especially like that its a GTS 4!.... I also have a 4 door, with a pristine interior and also on the hunt for GTR front seats...no luck yet. I really want to get a GTS4 as well...hope fully soon. Keep up the good work on yours man, i check in almost daily for updates....

Edit- by chance do you know Rob? he's ex-air force and has a car shop close to the base?

[Sileighty_85]

The car is comming along well, i especially like that its a GTS 4!.... I also have a 4 door, with a pristine interior and also on the hunt for GTR front seats...no luck yet. I really want to get a GTS4 as well...hope fully soon. Keep up the good work on yours man, i check in almost daily for updates....

Edit- by chance do you know Rob? he's ex-air force and has a car shop close to the base?


Domo. Nice, Lucky. GTR seats can be pricey

GTS4 is cool but more things to go wrong though

I do know Rob Smith. He Own "Big-D's" We do a little business together.



Forgive the potato shots it got dark when I started working on it.

2 cousins meet for the first time. (New Pics)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/FBBEA5A7-029B-4AD5-A1AD-3E1A70E08439_zpseew4zukj.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/1853A194-A8DB-4DE6-B315-A1E25F30FF0C_zpsfde0oym8.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/21085496-8709-4CAC-9C7A-77101BBA6DB0_zpsqe3s6ucp.jpg

Figured out why it was breaking up under boost.

Someone gapped the plugs to .068...... that would def cause spark blow out. Gapped it down to .032 and boost like a champ now.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/512753BD-96B2-4BD8-8E79-E8E67D99BF8D_zpsqo2na5z3.jpg

[future]

Glad it was a simple fix

[Sileighty_85]

A step closer.

Got the right side rebuilt.

Guess ill do a basic write up on this if any one is interested.

Get your supplies

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/C46ACA37-DC4D-417E-B09D-9C0BFAFC1F5D_zpso2vzbxuz.jpg

and your axle

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/BFFDCC87-241F-4ED2-9A64-3B6E76677749_zpsfdru4wfn.jpg

I normally cut off the boots to make it easier since they a F'd anyway and get them out of the way for disassembling.

This ones kinda worrisome, never seen indentations from the tripods before so this sides taken a smack from something.... so ill be using a spare spindle I have laying around.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/55F29571-3C16-4BD9-A69E-AA1B80096FEB_zpsfohopttc.jpg

next knock off the other side by hitting the inner cage with a hammer. Normally I clamp this in a vise but dont have one...

So tap "strongly" right here

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/54DEA9C6-CD33-479E-BD0B-6A938D9F1A07_zpswqhkyvl8.jpg

and it will come off like this

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/FBE64CB9-A2F2-462E-A27B-4A591253AB00_zpsvycfcu3z.jpg

Then you need to clean out the cage and bearings. If its a recent tear in the boot you might be ok to not have to clean the whole thing out. But mines been broke for god knows how long.

To remove the bearings press the cage until the bearings become exposed

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/0A7DA6C5-6167-4372-8F6A-0A6C9825BAE1_zpsqgo6xgrk.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/C05ABB24-2568-4790-9199-542F91D93296_zpsxza8byx0.jpg

Then pop out the bearings

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/5D00F4CC-5CCE-4DE4-AAD8-2709F9884400_zps7vqhtvwa.jpg

Unfortunately the cage will not some out so you need to clean it as best as you can.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/75D70F6C-E71E-4DDC-BC95-7CEB3B92682E_zpskodxn5er.jpg
ATTENTION!: when you regrease and asemble make sure the cage look like this. Inner cage with tapered end up, and the out cage
thin side up. The other side of the outer cage has a thicker top/side
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/153966CF-C080-4031-B868-4191D09A3394_zps6pan1zmr.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/41A28C6A-A209-465F-989D-62F93F188740_zpstyyjirqu.jpg

clean the bearings

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/D87A0FD8-4B6B-4646-8D72-A81CE93A75C7_zpsxawmjzfa.jpg

Once you got it all cleaned up, pack that shit with grease.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/15C2C65C-6737-4922-B323-AE34A70BD5CB_zpsngfblmsf.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/4CE7DAE2-EE31-4905-9AB0-4BF5E120FB20_zpsqnfddirh.jpg

They only sell slpit boots here and there are no more OEM Boots in Nissan. I actually bought the last inside boot from Nissan inventory lol

So I like to glue mine before installing cuz I like it that way.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/9550F48B-A0FE-4053-B6C5-813189FA9DA8_zps5unn8gy5.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/B7E562C6-4FCC-4FC8-8C0E-61AAD2F8F85E_zpsrzoynbva.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/1689ECF0-9A6F-4631-A756-E3399A73FFA2_zpsijuv2ffe.jpg

So once the glue somewhat sets assemble the boot and clamp them down.

BUT! I did it the hard way for the other side cuz I had to use a different diff spline.

Before assembling the outer boot install the inner boot, or you'll have to remove the tripod bearing witch is kinda a PITA without a vise.



So after getting the axles installed I took it for a test drive. and noticed after a hard brake the pedal kept dropping while i held it. Got out and checked the front brakes to see the brakes were leaking.... could have crashed or some shit.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/FE17B9DB-7476-4D72-B3D0-A9C651862355_zpsieefddyi.jpg

Ripped off the wheels to see this ghettoness....

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/C53B11B4-E409-4D40-AE6E-359B1557DDB4_zps2vogneea.jpg

Suppose to be flared fittings, but the PO decided to use what I guess are S13 lines and used Banjo bolts but didnt cut them short enough so it was bottoming out and not sealing all the way.

So as a temp fix til I can get the correct hardlines to install the GTR brakes and Nismo Braided lines.

I shaved the bolt down an bit more and made a flare to help clear the internal flare a bit more.
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/8208F6F3-DDC5-404D-B8AE-160729E54C42_zpsqzuaegps.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/25F6CCFF-86F6-4DFF-BF8B-323FF041297C_zpsnh3pms0b.jpg

It worked....

[future]

Definitely ghetto fix lol

[hasemi]

The bnr32 is getting no love whatsoever.

[10psitx]

[QUOTE=Sileighty_85;5902603]Domo. Nice, Lucky. GTR seats can be pricey

GTS4 is cool but more things to go wrong though

I do know Rob Smith. He Own "Big-D's" We do a little business together.=[QUOTE]



That's the guy, i also do business with him and his business partner here in Texas. He's gonna be in here in a week or so, I'm hoping they can find the GTS4 i want....did you get a chance to see the Veilside r32 Rob got? Its currently being shipped here...absolutely insane that one!

[Sileighty_85]

The bnr32 is getting no love whatsoever.

Not entirely true, it's awaiting parts right now. I ordered some JUN Racing Valve guides and Super Tech Valves. So as soon as those come in I can take it down to the machine shop.




Domo. Nice, Lucky. GTR seats can be pricey

GTS4 is cool but more things to go wrong though

I do know Rob Smith. He Own "Big-D's" We do a little business together.=



That's the guy, i also do business with him and his business partner here in Texas. He's gonna be in here in a week or so, I'm hoping they can find the GTS4 i want....did you get a chance to see the Veilside r32 Rob got? Its currently being shipped here...absolutely insane that one!


yeah I think he is there right now. It s possible but they aren't cheap if its a platform like mine.


ahh I haven't been by his shop in a while, So I have not.

[Heywood Jablomie]

Ohh please get some big 3 piece wheels and bn sports for this thing. Love this.

[Sileighty_85]

Ohh please get some big 3 piece wheels and bn sports for this thing. Love this.

Im thinking of a URAS kit, with either the Origin DNA wheel I posted up top or the Impuls

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/URAS_zpsulmbsyuo.jpg

http://i73.photobucket.com/albums/i235/Neil_85/GTR/Impul_zps5p14kpqd.jpg

[IIIXziuR]

I think the Uras kit will be a cool look.

[OBEEWON]

Uras is like OEM Aero for HNR32's. Perfect.

[Sileighty_85]

Uras is like OEM Aero for HNR32's. Perfect.


Got a buddy that enticing me to buying his BN kit. Hard to decide.

Picked up a better trunk as well

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/325D15C4-DE81-4057-A2BC-6A6B92FED0AD_zpstamn70xu.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/5E4FF90D-04DB-44D1-A470-F24F4919259C_zpswaheuke0.jpg

Go a Slash plate so i could bring the car on base and get the alignment, adjust the headlights and get it CO2 checked to get this thing ready for JCI.

Surprisingly the engine runs good now after unfucking everything.

Chassis is...... ok. Rust wise its pretty good. frame rails and pinch seams have taken a beating.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/FE1B5EE0-D03E-465D-980E-E6DC0A2AB123_zps8syxrwkc.jpg

I was on a time crunch all day so forgot to get more pics.

Did test fit the DNA02's Not too shabby. Just needs some camber

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/27AD36AD-920E-4755-B7BA-41D519EFB372_zpswqpzklsi.jpg

[ZenkiDeven19]

Dude I love it, please come through with a bad ass family car! Lol

Sent from my SM-N900V using Tapatalk

[_tony_s13]

new shift knob and boot + other interior pieces you need + gtr front grille + paint and she will look stunning, props to you sir

[Sileighty_85]

Dude I love it, please come through with a bad ass family car! Lol


Trying to, Hopefully it all works out.


new shift knob and boot + other interior pieces you need + gtr front grille + paint and she will look stunning, props to you sir

yep that's all in the works, I got my old GTR hood ill slap on it, and working on picking up a BN kit from a buddy of mine.


I wanted to paint the car white but the wife thinks white is bad luck now cuz of the wreck we got in with our old Zenki S14, So now she wants to paint it Red.

Here's the kit I might be getting.
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/BN%20Kit_zpsef508bn6.jpg


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/BN%20Kit2_zpsakfq3mwy.jpg

[ZenkiDeven19]

Do you have pics of the zenki you used to have?

Sent from my SM-N900V using Tapatalk

[Sileighty_85]

It was nothing special, I only had it for 1-2 Months before some old fuck pull out in front of me in a parking lot.


Insurance Totaled it and ended up buying my 98 S14.


http://i73.photobucket.com/albums/i235/Neil_85/Miyukis%20Silvia/DSCN0986.jpg

[ZenkiDeven19]

I hate old fuckers that can't drive...lol

Sent from my SM-N900V using Tapatalk

[Sileighty_85]

I hate old fuckers that can't drive...lol




yep, but worked out better for me. I paid 2K for that car, when it got Totaled insurance gave me 5K for the car lol


took that and bought the 98

[ZenkiDeven19]

yep, but worked out better for me. I paid 2K for that car, when it got Totaled insurance gave me 5K for the car lol


took that and bought the 98
Shit that's badass

Sent from my SM-N900V using Tapatalk

[bhhamblin]

give me the RB20 bruhhhh.

[Sileighty_85]

give me the RB20 bruhhhh.

lol Sorry, Probably gonna keep that as a back up for if anything happens to the RB26






Finally got a shift boot and Installed a Tomei Steering wheel with a sweet D1 Horn button from UpGarage until I can find another Tomei Button.


Just waiting on a front bumper support so I can get this thing JCI'd


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/8506CC71-5A90-441D-A922-D91EAEB2D46B_zps0uwevwnu.jpg


Hopefully soon

[Reece]

No BN. Get Uras.

Looks good so far! Let me know if you ever want to get rid of that Navan shift knob.

[Sileighty_85]

No BN. Get Uras.

Looks good so far! Let me know if you ever want to get rid of that Navan shift knob.


Well my buddy is giving me a great deal on it. I love to save money so ill probably be getting the BN Kit.

Shoot me a reasonable offer and I might consider parting with it. Its got some wear on it though.

http://i73.photobucket.com/albums/i235/Neil_85/Misc/For%20Sale%20Parts/Navan_zpsbt3oi9mn.jpg

[Sileighty_85]

YEY PARTS!

Got a box full of interior parts for 5,000Y Jack Pot.
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/2046B91B-8E6A-4D1E-BBFB-FDEB5B32F661_zpsaovuhqub.jpg

And got a Koyo Copper Rad

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/AE43393C-FE24-4A7F-872A-6D98B51B501C_zps9felyr3q.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/84736A67-6DDB-4482-9A2B-D3BAECF037D3_zpscwd7bokj.jpg

[xpinoyxmk]

Yo where'd you get your boots from?


Went to the hobby shop here at Yokota to order some and they said they couldn't get them?! Same thing with tie-rod boots...


Btw car is already looking way better than when the PO had it lol

[Sileighty_85]

I got them off the auctions. Only problem is for some reason they dont have the FR inner axle boot...

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/boots_zpsvstcwrch.jpg

But I think I have a new lead on boots.

[s14kkouki]

Nice build Man. Also I want to thank you for this thread. I'm on the hunt for interior pieces for my gtst and I almost bought GTR items thinking they would fit. 5,000yen is a steal for all those pieces you got lol. Just a center Console on eBay it's like $160 ��

[Sileighty_85]

Nice build Man. Also I want to thank you for this thread. I'm on the hunt for interior pieces for my gtst and I almost bought GTR items thinking they would fit. 5,000yen is a steal for all those pieces you got lol. Just a center Console on eBay it's like $160 ��

Domo Glad I can help.

All the R32 interior peices should be the same minus the carpet between 4wd and Rwd models

Yikes that pricey. One reason why im stocking up on parts over here, cuz I know they will be way more expensive in the US.




Finally got my hands on Front Bumper brace

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/A29F3915-2B0E-4EF4-97DE-CB70486406E3_zpszkzmh36w.jpg

And a replacement tow hook section

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/3454B3AC-5C9E-44F9-A5C6-3CF915610B2C_zps97arrune.jpg

Found a new shift knob as well

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/6A931D4C-284B-4893-98CB-9080875260CD_zpsxbvn8zko.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/C047D07E-A86F-4522-9134-8E5D5C52D77F_zps5is3hcyh.jpg

Little Mother Mag Polish and she cleaned right up

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/DA7298EF-0017-4F2F-84A6-26217F385FE4_zpsth5lgolb.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/F88B929C-6CAE-4B52-BF9B-88AE87B6CA79_zpsegfunym8.jpg

Got in some Sun shades for the R32's as well

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/E3B54CC6-A171-4057-8DE3-84245651B879_zps0isiothl.jpg

and trying to decide on paint colors after the body work is done

Pics dont show it but they have a bit of metal flake in them

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/03084390-F4E5-4C17-B208-5F142192E8ED_zpsp7eixcsc.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/3CEDD1FA-033A-4D44-ABED-718E2CF59976_zpskjavgisd.jpg

It'll be cheap job unless I can get a good deal over here

[Sileighty_85]

so kinda weird between the GTR and the GTS-t the A/C bezel is different. the GTR one is shorter. But GTR ones are going for about $150... Fuck that.


GTR Left - GTS-t Right
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/095E8570-48A3-47AA-9293-AF1502213490_zpsgrxpfv9v.jpg


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/F0DCD532-0CA9-49EC-8B97-78915A9B4D82_zpsuekvible.jpg

So I modded the GTS-t one. I cut is down then sanded it flat. Worked pretty well.
Not too shabby
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/B770F362-E1BD-462A-A921-DCADBC2A1F40_zpsadzebjyt.jpg




So if you are unlucky enough to get the weird H4 to H1 Converter bulb thingy that will suck cuz there is no HID kit to fit that shit.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/light%20bulb_zpsradv8zto.jpg



But I was able to find a H1 bulb thingy. So you can run a H1 HID kit. without having to do crazy shit to make a HID kit work.


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/04C4C916-FE56-4359-8EDD-6F2391A7A59B_zpsik7scbru.jpg

Picked up a HID Kit from DDM Tuning as well

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/745135C3-A8B0-4AB5-8BCA-7F9BD29B0A4A_zpszymyzozs.jpg



Wanna punch the PO in the face so bad. Probably the shittiest "mechanic" work Ive ever seen. Nothing properly torqued, its ever way too fucking tight or not enough.


Seems the kid tried to drift this thing before judging by the damage ive seen. noticed one of the the Rear LCA Mounts is damaged. seems like he side sideways into curb or some shit.


Finally got the bumper installed. Had to do a ghetto repair to get the bumper to mount up. once it JCI'd ill have a shop do it the proper way.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/A29F3915-2B0E-4EF4-97DE-CB70486406E3_zpszkzmh36w.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/D0933468-D07C-4D5E-989B-E206A255056A_zpsh7x3obs7.jpg

[Dolph_KYAS13]

Ac bezels are shorter in GTR's to accommodate the Din gauges. Just had to do the same thing on my car.

[Sileighty_85]

Ac bezels are shorter in GTR's to accommodate the Din gauges. Just had to do the same thing on my car.
well yeah I figured as much when it wouldn't fit under it. lol
still dumb

[Almighty So]

impul knob is sweet
haha that ac bezel shit would drive me crazy
it's the little things that make me nuts
looks clean though

[Sileighty_85]

yeah im glad I was able to use that with out having to buy one. lol

Just need to get some vents and order some door fabric to match the seats.

Finally got the axle rebuilt and doing some ghetto HICAS boot repair when I noticed the LRCA ball joint was bad.... couldnt remove the HICAS arm so I had to disassemble the E brake to disconnect the cable to gain access... took way too fucking long for that.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/580AE1A1-DAEE-4E7B-81E1-E2ED2E3AB537_zpsyqey5x9o.jpg

And took her for a test drive

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/EF795AD0-7DFF-4C94-97EE-5F131FF3D20A_zpsyvmvkjvs.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/2852927F-84A7-4F7C-9689-D309B67DDECA_zpsilltz117.jpg


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/307C8298-440D-496A-BD7D-5F3B180D18BE_zpsshcmd2mp.jpg


Damn this thing is ugly...

[Almighty So]

couldnt remove the HICAS arm so I had to disassemble the E brake to disconnect the cable to gain access... took way too fucking long for that.

jesus you have the patience of a saint hahaha
glad to see she was able to hit the road again for some driving

[Sileighty_85]

jesus you have the patience of a saint hahaha
glad to see she was able to hit the road again for some driving



lol Ya gotta WANT it.


Want this thing finished so I can get it Inspected.

[Sileighty_85]

So JCI has been C/W (Complied With).... Means good to go.. lol


Optional Read: if you are bored at work and curious how the Japanese inspection shit goes on here here was my worst experience with it.


Gotta vent about this shit though. Be grateful most of ya'll don't have to deal with registering a car in Japan.. Most of ya'll probably wont understand most of what I'm talking about too so whateves lol.




So back when I first go the car I initially just wanted to get the title in my name and not worry with a getting a JCI, We called them and they said bring the car and paper work and we can do that. I get temp tags and bring it down there But then they said the needed a current JCI in order for me to change the title in my name......WTF... Son of a bitch.... OK Fine, That way when I sell the other cars I can drive this thing until I leave Japan.


So they told us we had all the paper needed and just need the inspection done. Well this turd box needed a good bit of TLC as most of ya'll have seen/read.


So on 3 different occasions we asked what paper we need to make sure we had it.
So Judgement day happened today for the JCI. So we get there at 10:00am give them all our paperwork for them to say we don't have everything...... Immediately pissed off cuz we were told 3 times before we had everything.


They said we were missing a Ininjo (Japanese Power Of Attorney). We had one.. But they said we need another one for the JCI Policy (Prev Owner Bought the Policy)
So now they start picking up on my frustration.


I said WTF do we need one for I have FOUR BOS saying the car is mine.... so then they said if I bring them another paper work from the base they can do it..... that's a 1.5 hour round trip..... Even more pissed now. Now they start getting timid. Now im not yelling or cussing or being rude but my tone of voice and mannerisms are very oblivious im pissed.


So I say fine ill drive 1.5 hours to get the damn paper while my wife does what she can while I gone. Luckily I just get to the car to realize I need the title, So I go back in and tell them I need the damn title so the clerks like "shhhhhh" (Its a sound Japanese guys make when there is a issue) kinda like inhaling through Grit teeth.....


Anyway so since my irritation is very apparent now and they say... Well this one time we will make an acceptation so you don't have to drive all that far.... Fucking Right... something my way.


So finally get in line to the actual inspection.
Physical outside/inside/indicators/horn check - Good
Exhaust Decibel check - Good, surprisingly since the Silencer was 2mm too small and had steel wool stuffed in it since the Exhaust was not a JASMA model. lol
O2 check - Good (fuck yeah)
Alignment - Good
Headlight check- Right side failed. Little upset cuz I had a shop check and align it..
Speed check and brake check - Good
Under chassis inspection- Little worried about that one since the rear HICAS ball joint boots were bad but I RTV'd them until I can install some new ones. Surprisingly they didn't notice it. But they said the transfer case was leaking but it was residue from the PO that drove this damn thing with the torn shifter boot so Gear oil went everywhere (suppose to be ATF in the TC not gear oil.....) then he said my rear diff pinion seal was bad.... Fuck no its not. I was gonna be pissed if Id have do a rear pinion seal.... But what happened is the shifter gear oil was getting blown on to the rear diff.


I got him to drop the TC leak but he wouldn't let go the rear diff seal even when I showed him right under the pinion there was no fresh oil.... whatever kind easy fix.


Then they said my Ride height was too low. Mainly the fucking exhaust.... Kinda easy fix as well. Didn't know it was the exhaust that was too low at first just said it was 30mm too low.




Luckily there was a little pit shop right behind the LTO office for quick fixes.


Raised up the coilovers 35mm (thought it was gonna be enough)
Had the HL fixed then bought some Carb cleaner and blasted the rear diff pinion for a good 5 mins. No leaks Fuck yeah.


Then noticed as I was driving out that My toe was now jacked from raising the car... Fuck, now im paranoid that when I go back through that it might trip the alignment sensor and they fail my car for that... So had to wait for them to finish lunch to get that fixed.


So got that fixed. Ran back through, Passed everything but the Ride height ..... SOAB... so I watched the guy do the height check to see that it still needs to go up 20mm...
Asked them if I fix that can they check it real quick , they agreed and said to go to this other bay when I fix it.

so I Jack the car up and cranked the coilover as high as those fuckers would go. Camber and Toe were all kinds of fucked up but didn't matter since I wasn't gonna drive over the sensors anymore. Still not sure if its high enough, debated on airing up the tires more but nah. Essentially I made my car more dangerous to pass it lol.

I get it checked out, passed with 15mm to spare lol guy looks at it and decides he wants to check the tire pressure...... Now you fuckers are just trying to find something.... Luckily didn't air them up so pressure was good.


Finally Inspection done just need to go back inside and get my sticker and plates.


They then look over my paper work one more time to just now notice that my JCI Poicy and inspection Dates are too far apart.... YOU MOTHER FUCKERS..... They told me I had to buy a policy extension so the dates are the same... Told them this car is gonna be exported before the Either JCI is expired and I don't care. Well they care, The also told me that when I export it I can cash in the Policy for a refund.......THEN WHAT THE FUCK IS THE POINT OF BUYING THE POLICY EXTENSION!!!???...... So I had to spend 12,000Yen on a extension. So then after running back and fourth between 2 buildings 6 times I finally have my plates in hand and its now 4:30PM....


So car was iffy to drive with the 4X4 setup (Wish I took pics but was soo pissed I didn't think about it) so Once I get a few miles away I pull over in the rain and readjust all the coilovers back down.


Kills me you cant reason with them and tell them:


"Look bro lets be real when I get this thing home its getting slammed, Wheels, Suspension, and blast pipes... so how bout you just not worry about these certain things. Its a waste of both of our time"


But it cant work that way.




END RANT/


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/JCI%20CW_zpsngtfvm6u.jpg


so depending on weather tomorrow im gonna try and do the control arms and wheels. ^_^


Hopefully I get a base pass for the car so I can keep it at home and then work on it whenever I want to.

[Almighty So]

LOL that's a cluster fuck that sounds 100x worse that any emissions in America.
Can't speak for California cause that's all sorts of fucked up too haha

[IIIXziuR]

Dear Lord that sounds like a nightmare of an inspection process. Wow!

[1GR-FE]

Oh man, I hate that kind of thing. Where I live, in Georgia, all you need is a title/bill of sale and proof of insurance and they give you a tag. No inspection, no emissions.

[OBEEWON]

You can also marry your cousin. Streamlines the dating process. I love it.

[xpinoyxmk]

Damn that sounds horrible. I have JCI due before the end of this month. Dreading it but apparently all I do is have the base hobby shop do a pre-inspection, pass and then my insurance company takes care of everything else. Hoping its not near anything as bad as that.

[Sileighty_85]

Yeah Def a shitty day. Gets even shittier cuz the Base will not give me a pass for this car.


We are only allowed to have one vehicle per licensed driver. I have a waiver from two years ago that allows me to have three vehicles. Shits changed since then. I want to de reg the GTR and put the Four door in its place but the only way They will allow that is if I either "Sell" or "Junk" two of my cars. Chances of getting another Three car waiver is very slim now due to a new commander....


Soooo fucking hate PACAF right now, cant wait til I leave here so I can have a Big house, garage, and as many cars as I want and stay out as late as I want.


So the car has to stay over at my buddies house.....So still have to do a 30 min commute to work on it....sigh


But I can bring it on base easier now but still.




http://i73.photobucket.com/albums/i235/Neil_85/HNR32/Brothers_zps4xcnoyyo.jpg

[xpinoyxmk]

Yea I feel you on the PACAF bs and people wonder why I want out... They don't understand how childish this shit is.

On another note, can you help me confirm these issues I'm dealing with:

1. I currently have D-Max rear adj arms and heard that they will not pass JCI, this true?

Sucks cause I threw my stock arms away.

2. What are the restrictions on exhausts?

Put my cat back in and threw in some silencers but issues I'm having is my exhaust is on the line of sticking out past the bumper and also was told silencers now have to be riveted? instead of a bolt holding it in.

[Sileighty_85]

Yea I feel you on the PACAF bs and people wonder why I want out... They don't understand how childish this shit is.

On another note, can you help me confirm these issues I'm dealing with:

1. I currently have D-Max rear adj arms and heard that they will not pass JCI, this true?

Sucks cause I threw my stock arms away.

2. What are the restrictions on exhausts?

Put my cat back in and threw in some silencers but issues I'm having is my exhaust is on the line of sticking out past the bumper and also was told silencers now have to be riveted? instead of a bolt holding it in.



I understand why they have to do it but I think it should be up to group commanders to decide if certain ppl need to be on restriction or not. But of course no one wants to make those judgment calls.




Ive heard some place don't care, But they are not suppose to be legal. Only Ikeya Formula are JCI cuz they come with like a "Quality Test Report" to show its better than OEM.


Up here you need a catalyzer, pass O2 and the exhaust can't be any louder than 90Db. If your exhaust has a JASMA badge on it than its JCI legal.

[Slayer]

Man I feel your pain. For future reference just tape a bottle of decent whisky under the car next time. Ive never had any problems going through shaken with my car and the bottle is always gone after the inspection 😁😁

[Sileighty_85]

Man I feel your pain. For future reference just tape a bottle of decent whisky under the car next time. Ive never had any problems going through shaken with my car and the bottle is always gone after the inspection 😁😁


lol, If I ever have to do a JCI on such a shittily maintained car I'll keep that in mind.

My other cars shouldnt have an issue.



So now that the car is JCI'd I can finally start modding it.

So first on the list was Wheels. Installed the Origin DNA02's. Fitment is pretty good for some +15 offset. Just need a little bit of camber and lowered a smidge bit more and I think it'll work pretty good.

Gonna leave it at this height for now since I wont be around for a few months while the wife will be driving it, So I dont want her to have any issues.

Looks kinda Meh right now but imagine a Deep Red with flake and Pink 326 Power 7mm lugs (Wife wants Pink) lol

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/BE241F8A-33F9-48D0-8DB1-405DD7E63E01_zpsoexyipwk.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/7B4CBE98-8B81-46BB-8147-5586B4AB2BD9_zpszparid1q.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/8688374F-3780-4F8D-BA3B-38D9DD9DB1A7_zps4v2gnew8.jpg

Also installed the HID's in mine and my friends.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/2A5011CC-599A-4B8C-97C1-696803DBEE7B_zpsgbgufrma.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/167DE01D-378A-4AED-881E-274F6865577A_zpsbgjeznci.jpg

[BossHogg]

dude those sun shades are the shit. I have been looking for cool stuff like that. That and a nice car cover. That is one reason I'm afraid to go to japan. I think I would buy so much random little novelty items.

[Sileighty_85]

dude those sun shades are the shit. I have been looking for cool stuff like that. That and a nice car cover. That is one reason I'm afraid to go to japan. I think I would buy so much random little novelty items.



haha Right, Saw those came out not too long ago in a GTR Magazine I got and just had to get them lol


Yeah my wife has been buying out the Nissan/Nismo website of all the little trinkets and such lol




Finally got my hands on the BN Sport Kit from my buddy. Hopefully get get it installed tomorrow.


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/BCDB9DAB-2197-45A0-8B4F-E021E3751C99_zpsqfaaojqs.jpg


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/BC191EF5-86F9-4C8D-8F05-7EBDFF4F21D4_zpsi3pxnz5e.jpg


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/5B4E5092-6484-4BFE-98F1-A964AC0F373C_zpsuqqq9vy9.jpg

[Sileighty_85]

Got the front bumper and side skirts on.

Bumper too a while cuz I had to raise the FMIC so I didn't have to cut diverter on the lower section.

Looks better. Just wish the paint wasn't shit...

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/3E3938B1-180B-403D-8659-0C695E3F9B19_zpsgrnw4vbl.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/3E3938B1-180B-403D-8659-0C695E3F9B19_zpsgrnw4vbl.jpg.html)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/2DB10AB2-BF19-4541-9DFE-6D36963CA0C2_zpsthganktx.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/2DB10AB2-BF19-4541-9DFE-6D36963CA0C2_zpsthganktx.jpg.html)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/8A095EC2-408A-4205-A8A0-D21A7D7438D2_zps26gcpo1y.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/8A095EC2-408A-4205-A8A0-D21A7D7438D2_zps26gcpo1y.jpg.html)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/8988A881-2234-493F-9E54-F9F4AE90F917_zpsf44q79s3.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/AA966440-6F39-4265-8804-A366FF73FDFE_zpsiuwjhuna.jpg

[ehhhregartless]

You are literally going from ashy to classy. It looks amazing

[Juucso]

Looks really good! In my opinion this is best body kit for HNR32!

[Sileighty_85]

Domo Guys

Finally got the rear installed.




This rear bumper had be damaged before and was repaired. Might buy a new one cuz it kinda bothers me lol but we'll see




http://i73.photobucket.com/albums/i235/Neil_85/HNR32/BN%20Kit3_zps4fs56jqw.jpg


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/BN%20Kit4_zpsu72suyo4.jpg

[codyzsilvia]

god this car looks good with that kit lol.

To live in Japan, ahhhh

[Flip2Flow]

I love the BN for the 4 door R32, so jealous!

https://naritadogfight.files.wordpress.com/2013/10/img_1286.jpg

[Sileighty_85]

_______________________

[Sileighty_85]

Thanks guys ^^



So after 3 years I am finally allowed to start drifting again!


So I ended up saying fuck it with this chassis and took it to the local track and went totally aintcare, HOONIGAN, driftmissile on it and totally fucked it up over the past 2 weeks.








http://i73.photobucket.com/albums/i235/Neil_85/HNR32/F6974D5E-CDA6-47E1-BDFE-AE44300DF4EC_zpscw4a9rbt.jpg












Just kidding

Borrowed my buddies R32 4 Door haha


was doing pretty good for being out of the game for 3 years until this happened.


Went a little too hot into the "sweeper" and went offroad until it high centered. Luckily no damage from the incident though.


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/7C99A632-3F35-40F6-B2E9-C70A5765F7F0_zpsupfebiz0.jpg


So I bought these tires off the Auctions for 2,000Yen each, but shipping was 2,000 Yen per tire. So 8,000Yen for 2 brand new tires. Not bad.

380 Tread wear.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/Full%20Run_zps4nss2uan.jpg


After 20-30 laps on the course these tires still have 70% life left with practically no chunking pretty impressed.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/Full%20Run2_zpsa1qjzzw8.jpg

[IIIXziuR]

Nice psych out, haha.
The car sure looks amazing with the BN kit on it!

[JIMB0]

BN was made for 4 door R32's

[Sileighty_85]

Domo guys. Sadly though its probably not gonna be painted til it get to the states :/


Been trying to be good lately and keeping off the auctions but came across some R33 Brembo brakes for the GTR for cheap :/ good and bad. 4 door will get the GTRs old brakes
So yey upgrades lol

But also stumbled across a Tomei BMC stopper at up garage for 1,500¥. Yoink lol

http://i73.photobucket.com/albums/i235/Neil_85/GTR/E1E392DF-5F1A-46E6-8DC5-44222C061C00_zpseduyaoyv.jpg (http://s73.photobucket.com/user/Neil_85/media/GTR/E1E392DF-5F1A-46E6-8DC5-44222C061C00_zpseduyaoyv.jpg.html)

Needs cleaning though.
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/DB63B365-066D-4BAA-BCEB-41CFB16C228D_zpsqsn3tlgl.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/DB63B365-066D-4BAA-BCEB-41CFB16C228D_zpsqsn3tlgl.jpg.html)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/F3168840-C697-436D-A6E4-0113C0277319_zpsanubjamn.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/F3168840-C697-436D-A6E4-0113C0277319_zpsanubjamn.jpg.html)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/ED355F44-FAAA-45B9-8384-A27E2639915E_zps7je7ifpt.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/ED355F44-FAAA-45B9-8384-A27E2639915E_zps7je7ifpt.jpg.html)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/6A3D8322-6DCA-4BC0-97B9-FF604A840540_zpsifbbnnln.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/6A3D8322-6DCA-4BC0-97B9-FF604A840540_zpsifbbnnln.jpg.html)

[Sileighty_85]

Busy day today too bad its no progress on the car. :/

11:00 went to a car a show to make everyone else look better by comparison.

(To answer anyones question on the green car, Its a 1973 Nissan Gloria with an L20)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/E7C53B60-D095-444A-B169-BA594AD6F234_zpsfd1q9bvk.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/479DF5D3-554C-4792-BA3A-CB8C5831E8B8_zpshmeen13m.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/749BCCBA-1B11-4A18-BAAD-9A746BC6EA9D_zps9pcrsron.jpg

2:00 Then met up with some Japanese friends to hang and go on a Touge run.

Car handled surprisingly well, especially with worn out 235's up front.

Did all that until about 6:00 and then hung out at AutoBacs

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/F55EF8E9-6A84-4962-8527-26E7F5E38E9B_zpsly03diwm.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/84F2B030-CAA8-4B03-A752-E20DF86426F1_zpscrzybrb2.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/EEF47193-1126-4136-AC5B-A8A17527E75F_zpsdkzehecu.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/05D2FB57-DBF6-45D9-A465-63A21CF9AFD5_zpslrx8yhrq.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/0370340C-69ED-45E1-8846-6BD8FD442144_zpswuk911ib.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/08A493FF-6562-4F5D-98F5-A728ABAF2B2E_zpso1pzgmln.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/B5E3E8E4-ACF1-4673-8790-9BF2EE7A2FF1_zpsfmnxwndv.jpg

[signals13]

Nice build, love the 4 door r32. Would love to build one, would you able to find out any info on that V35 front bumper? Looks like the Top Secret one, I'd like to get one for my sedan.

[Mister.E]

Nice build so far man. Definitely makes me miss Misawa.

[Sileighty_85]

Nice build, love the 4 door r32. Would love to build one, would you able to find out any info on that V35 front bumper? Looks like the Top Secret one, I'd like to get one for my sedan.

Thanks, Nah I know nothing about those chassis's and not really friends with that guy.


Nice build so far man. Definitely makes me miss Misawa.

Domo, Not a fan of Misawa, It has some nice views but too country and far away for all the cool stuff of Japan. Okinawa Spoiled me on having everything crammed on that island.


So I suspected for a bit that there was something up with my Fuel tank cuz I was getting shitty gas mileage and whenever I filled up I would never hear the tank depressurize when I removed the cap. When I went on that touge run I had a strong smell of gas in the cabin. It was very strong in the trunk so was pretty sure the PO fucked up the tank seal.

and I was correct. Its common that when you spill fuel on the Oring that it will expand and not seat in the groove correctly.

Old Seal
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/801AC72D-F474-4940-BD9B-986095848C16_zpsfe2rsqc1.jpg

New seal
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/5F19B0A9-A285-44FF-A5F7-C9693FBAE837_zpslvut7m47.jpg


and of course when I pulled the sender out I get this kinda fuckery, honestly not surprised by this.

PO installed a GTR fuel pump and this is how he mounted it.

Zip Ties.... Plus it was a pain in the ass to remove with out breaking something cuz the sender and fuel sock were 180* apart from each other

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/8A442197-7395-43C3-88D5-820A62CACEA7_zpsk8ffinhj.jpg

Should have seen that coming.

Re-clocked the fuel sock so I can install and removed easier. Did not have any on hand parts to better remedy the situation, and the lower vibration mount was cut in half so I adjusted the feed pipe and used a worm gear clamp and wedged the rubber in between the pump and holder until I can get my hands on that GTR (Still waiting on the seller) and just swap in the GTR fuel tank.

So in the mean time this will suffice

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/6e9d53cc-a476-4216-ac66-12eb2df30eeb_zpsduqzvhag.jpg

[A54]

Another good Thread...I miss going to the Super Autobacs on weekends here in the OC now that's its closed. How are the write-ups going from that acceptance inspection?

[Sileighty_85]

Another good Thread...I miss going to the Super Autobacs on weekends here in the OC now that's its closed. How are the write-ups going from that acceptance inspection?

Domo, that sucks, wasnt popular enough?

Slow, Got some GTR calipers rebuilt just need the factory front hardline and I can install them.

http://i73.photobucket.com/albums/i235/Neil_85/GTR/8FE1B4A2-0C02-4C82-80CF-B49343DA5528_zpsrphjlf3j.jpg

Then I can rebuild the BMC and Slave MC, Then Timing Belt and water pump.

[Darkcr3w]

But also stumbled across a Tomei BMC stopper at up garage for 1,500¥. Yoink lol

http://i73.photobucket.com/albums/i235/Neil_85/GTR/E1E392DF-5F1A-46E6-8DC5-44222C061C00_zpseduyaoyv.jpg (http://s73.photobucket.com/user/Neil_85/media/GTR/E1E392DF-5F1A-46E6-8DC5-44222C061C00_zpseduyaoyv.jpg.html)

Awesome build. I see you're working on an Iphone as well lol.

[Sileighty_85]

Awesome build. I see you're working on an Iphone as well lol.

haha yeah, I pretty much work on everything.




Score. Greddy Radiator to replace the Copper Koyo. Looks almost brand new.
Just need to order a timing kit so I can get it installed.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/D9F63AE4-B2E0-4DBD-A581-038D1B5DA3A4_zpsz3rknnw9.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/C81D26F7-8B65-444C-8E4E-6241E1A266EE_zpssqeh8srj.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/A0321C44-49CF-4BB7-B404-B6283FA3D227_zps4byzv6a0.jpg

[Sileighty_85]

Finally ordered a timing kit and able to get it done.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/6A7EBC42-C67C-4231-9E33-217750CE053A_zpsncgtpatr.jpg

Fucking hate not having a garage. I had to knock this out in 3 hours at out Auto Hobby Shop.... If I had 4 Id be alright. Didnt get to take any pics cuz I had to hurry up and get this done.

Pulling the starter took a min cuz I used my flywheel lock tool so I could break the crank bolt and torque it. Def made that shit much easier.

Didnt get to finish it so I had to push it outside and finish installing the belts and radiator in the dark...

But hey its done.

Good thing I did too cuz the idler pulleys were staring to develop play.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/5390868D-5236-48C5-95FD-41D8358FD7F5_zpsy6gf706x.jpg

Winter is coming and I wont be around for a few months So i took the kit off so the wife can drive it without worry of something happening with the kit and not being able to fix it or whatever.

So now its back to its ugly self.

But I was able to install the GTR's hood on it and shave off about 20lbs of that stock hood lol

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/B876EFC3-0DEA-4FF1-B4DC-D2F100738B81_zpsmxdjorr2.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/22742339-16AD-4B06-90FA-03D17D57CB90_zpsk7d0e6gn.jpg

Also was able to get a hook up from a buddy on a GTR Grill to fill the void

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/FF932AF4-947F-4F6A-B7FA-401493A66398_zpsf7yr2wat.png

Also rebuilt some rear calipers and installed them with the Nismo Lines.

I got some front caliper hardlines in route from Australia since for some reason I cannot find any here in Japan. So hopefully they get here soon so I can install them.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/E28CC190-83B6-4116-993F-33005BE3DAC5_zpso14wgumx.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/5755A818-E28C-4712-9207-FAEB17C9F1AC_zpsch26vmr1.jpg

[s13rhdhatch]

Hey I heard when you use a gtr hood you have to use the gtr hood latch as well,is this true?

[Sileighty_85]

Hey I heard when you use a gtr hood you have to use the gtr hood latch as well,is this true?


Yes it is true, Luckily the GTR chassis I bought still had it on it.

[Sileighty_85]

Finally able to install the GTR brakes today.

Believe it or not I could not this metal hardline and bracket in Japan. I had to get one for Australia O.o

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/23BDABDC-BAF2-46D8-8A5E-A940162275A5_zpsuyr5qvmz.jpg
I was also able to install the Nismo Brake lines as well

Finally get this ghetto Shit outtta here

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/05D5B048-21CD-419A-85AB-0982E3E5B182_zpsre2y9mfh.jpg

And Boom.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/48378B3F-10C5-4A9E-BDC6-FD5EEE2A4D4B_zpss901huhc.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/CA2F2478-FF7E-4C7B-8496-107C0F107126_zpsebsbgzea.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/5B4653E4-59D0-4A4A-A3BF-F6C6DAB2EF0A_zpsjaueu0ls.jpg

Also got some GTR rear rotor as well to make it Uniform

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/FFB1D6E4-042E-4E13-B560-6EBBE6223021_zpsfw0n5n7f.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/9987DB04-D7B0-4907-866D-DB2F2E5D4D52_zpssbgenfow.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/069F5EA0-9FD8-4A2D-9A28-D76341906483_zpsknwivipj.jpg

[Sileighty_85]

Love saving money but most importantly keeping quality and reliability.
Rebuilt my BMC for the 4 Door for less than 10,000¥ using OEM parts. If I were to buy a New unit it would cost about 30,000¥.
It's nice to know how to do this stuff.
Can't imagine how much money I would spend to buy new stuff or pay a shop to do this stuff for me.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/7CF80247-8B8E-41BE-8A27-19BFDCB8BCFD_zpssfsivxzr.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/B37C24AB-B8F8-4053-B9B3-830238812823_zpsofzsfzee.jpg

Luckily I did this when I did cuz it turned out the OG one was leaking, half the fluid was gone when I came to replace it.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/F42B2483-6072-4009-A473-456039664E39_zpsxgzxcyrd.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/8C172CA4-334C-4ABB-ADB4-FEDC75D1B019_zpsttd5rvbd.jpg

Had to makeshift a bench bleeder system from some Vac lines and Etape. Worked pretty good.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/C9D86127-6D26-4496-8291-74DE5C9B2556_zpshrkmy0wc.jpg


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/EC8F4892-4BE3-4D96-BD82-9FB92E81C3A5_zps0gwxxxkm.jpg

annndddd Done...

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/5F420CB1-F405-475C-9D94-24E9E39B6955_zpstphaqtn3.jpg

[Mister.E]

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/9987DB04-D7B0-4907-866D-DB2F2E5D4D52_zpssbgenfow.jpg


North Area Shopette eh?

Good stuff man! Wish i still had access to cheap OEM rebuild kits and gaskets like that.



Sent from my iPad using Tapatalk

[Sileighty_85]

North Area Shopette eh?

Good stuff man! Wish i still had access to cheap OEM rebuild kits and gaskets like that.



Sent from my iPad using Tapatalk

Haha yup

Well nissan parts.cc and RHD have decent prices on most of that stuff.

Picked up another ARC piping kit a few days ago lol
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/ARC%20Pipes_zpsamcyxvcf.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/ARC%20Pipes_zpsamcyxvcf.jpg.html)

[Sileighty_85]

Scored another Tomei Short shifter, very excited. Been looking for another after I bought the 4 door, but even in the past 3 years I've never seen another until now.

Before finding this I was gonna buy a Nismo.


http://i73.photobucket.com/albums/i235/Neil_85/HNR32/419173D9-F860-48AD-B17C-7D2DB8A6D39D_zpskfeleuvb.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/419173D9-F860-48AD-B17C-7D2DB8A6D39D_zpskfeleuvb.jpg.html)

[Sileighty_85]

While im out of the country im lucky I can still buy parts lol

Picked up another ARC box, missing the filter hold down bracket but I can make one of those.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/ARC2_zpsqdnsu762.png

And some Tomei Manifolds for $135, one of them is cracked but I got a buddy who is a bad ass welder that can weld them up for me.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/Tomei3_zpszsuubllu.png

[KevinEdgar]

Very impressed with this thread. The new carpet and kit have been my favorite parts.

I like the way when you detect a problem you can pin point it so fast.

Btw, contact tomei and they should send you a new manifold, my friend did that with his SR manifold, though this was in the states.

pm coming your way..

[Sileighty_85]

Very impressed with this thread. The new carpet and kit have been my favorite parts.

I like the way when you detect a problem you can pin point it so fast.

Btw, contact tomei and they should send you a new manifold, my friend did that with his SR manifold, though this was in the states.

pm coming your way..

Thanks bro yeah been building cars for so long I can you eventually learn a system for troubleshooting.
That and the Nissan data Scan Software I have helps a whole lot. interesting, def have to check that out, hopefully they dont ask for proof of purchase.

Been gathering up a bunch of other goodies for the past 6 months, Finally heading back to Japan but only for a little while :/
One Item I just got I didnt expect to win. got it for 7,000Y
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/Tomei%20%203point_zpsxfmvsrrq.jpg

[Sileighty_85]

Got to open up all my parts that Ive been ordering for the past 6 months. It was like Christmas. Forgot most of that parts I ordered so most of it was a surprise.

I didnt open everything up completely since it'll be packed up soon.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/4DA3EF10-8A5E-455F-AE6A-78985DB2D0C3_zpsuc2flarz.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/E64428F8-6508-4FE1-860E-2DF915BAAB5A_zps0qu4m0eq.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/64891956-5ABF-45D3-9071-79519459CB71_zpsbqopg2bz.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/91BB4DDE-30AC-438F-943B-4D47B7D78286_zpsevphfxem.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/50E91DD0-F88E-4EBB-9571-A9D1491D505B_zpsmrd1f2zj.jpg

OEM Goodies. Misc GTR specific drivetrain seals, dash vents, HVAC actuators, and front axle CV boots.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/538B60F0-E2C0-4E60-A118-0B61B35A7CC3_zpsazb0hy6x.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/45369B3C-D668-414C-B041-87BBA7F9749A_zpsts53dntx.jpg

Got the BN Kit back on, Still looks hideous...

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/C998ED11-B308-4E8F-B956-658874F04179_zpsfip0qbfi.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/0F016A7E-C205-41BB-80B5-CC76EAEB00E5_zpsjfde2jkd.jpg

Had plans on getting the car painted before leaving but not sure if ill have the funds.
Wanted to get it painted R35 A54 Red.

Need to go talk to my body guy and see what we can work out.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/A54_zpsfl5tivrb.jpg

Also Installed the Tomei Short shifter.
When I got it the the boot was swollen and didnt fit. Lucklily had a BNIB shift boot that fit it perfectly.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/4CECFD0A-6BDE-438A-B779-5D2256666A4A_zpslszdnfxk.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/1F147CD8-1DEE-46DD-A5A8-EDC90F2A0340_zpsb8opv2hp.jpg

[Sileighty_85]

OHHHHHH MOTHER FUCKING SHIT YO!!!!

The GTS-4 has made land fall in Dallas at Infinity Imports International!!!

I'm so excited to have this turd back! Waiting on a shipment quote to get it up here so hope it gets here soon!!

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/0668D756-68F7-4BC2-A859-A52D3EDBDA73_zpsn5rahj3i.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/9D00DD9A-36D5-4904-8D53-BEA6A445AE9F_zpserqztw2h.jpg

[DJTTon]

BRo you came back with like a shop full of stuff. 2 cars and insane amount of cars.
$$$$$

[Unit 02]

looking great man

[Sileighty_85]

BRo you came back with like a shop full of stuff. 2 cars and insane amount of cars.
$$$$$

Lol yeah wanted to stock up on spare parts since 90% of the parts are R32 specific and parts not readily available just yet. Yeah just sadly I don't have enough room for them all lol, really miss my AE86.

looking great man

Domo!

[tricky_ab]

NICE! I can't wait to see what you do with this! Still "red or dead" colour choice?

[Sileighty_85]

NICE! I can't wait to see what you do with this! Still "red or dead" colour choice?

Hopefully awesome things, just depends on money since I get paid way less now that I'm back in the states.

Still planning on painting it red though.

[Sileighty_85]

Ohhh shit.

Family Reunion!

https://farm5.staticflickr.com/4293/35422952904_65469a9616_h.jpg (https://flic.kr/p/X2ZugR)Untitled (https://flic.kr/p/VYcTMj) by Neil Sellers (https://www.flickr.com/photos/[email protected]/), on Flickr
More to come tomorrow

[Sileighty_85]

Man its been almost 1 year since Ive seen this car now.

Got right to work on it the next day.

Finished swapping in the GTR interior. About 95% done now only other thing is GTR pedal covers, door card cloth and Dash clock. Probably wont do the Clock though.

https://farm5.staticflickr.com/4308/36256137815_184ffd3573_c.jpg (https://flic.kr/p/XeQbCp)Untitled (https://flic.kr/p/XeQbCp) by Neil Sellers (https://www.flickr.com/photos/[email protected]/), on Flickr

https://farm5.staticflickr.com/4298/35861974740_5372d34078_c.jpg (https://flic.kr/p/WCZZFj)Untitled (https://flic.kr/p/WCZZFj) by Neil Sellers (https://www.flickr.com/photos/[email protected]/), on Flickr

https://farm5.staticflickr.com/4293/36088566722_598a97734a_c.jpg (https://flic.kr/p/WZ2kzC)Untitled (https://flic.kr/p/WZ2kzC) by Neil Sellers (https://www.flickr.com/photos/[email protected]/), on Flickr

Installed the Defi Link System as well.

https://farm5.staticflickr.com/4312/35451500593_6d55e64f23_c.jpg (https://flic.kr/p/W1Jd1R)Untitled (https://flic.kr/p/W1Jd1R) by Neil Sellers (https://www.flickr.com/photos/[email protected]/), on Flickr

Not much in the Engine bay other than the Tomei bar.

Got about 1/4 tank of old gas in it. I thought the RB20 was slow before. Took it for a ride and when I hit boost, it pulls soo much timing to keep it from knocking it feel like an NA. Need to cruise on it to burn it all out.

https://farm5.staticflickr.com/4294/36122152911_d7b8e0dabf_c.jpg (https://flic.kr/p/X2ZtzR)Untitled (https://flic.kr/p/X2ZtzR) by Neil Sellers (https://www.flickr.com/photos/[email protected]/), on Flickr

[Sileighty_85]

So I'm gonna keep updating this thread with photobucket since its the easiest for me do than other than the other image hoasts.

So you can still see the pics in Google Chrome with that patch someone posted up a bit ago.

I had upgraded the brakes on the GTR to Brembo's so the 4 door gets the hand me downs.
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/07BBE30A-15A6-416A-A79C-81F007EBFA20_zpsgsqnf0fq.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/EAEDF830-B2B7-4B04-9B54-2BB2B5AA6726_zps1tic8uba.jpg

Daughter came in to give me a hand as well

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/2759CB82-A17A-4954-B31F-9E54E6C5AD6C_zpslbybkkad.jpg

Also install the Adj suspension

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/62248BB0-E49A-454F-98D5-DD42CC6E968A_zpslrhagrih.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/D9F1573E-E447-458E-AABE-7DF02A564CF6_zps09efqv2n.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/08B4AA76-A9E2-4C5E-97DF-AE8150C85DEC_zpsbmxo7ct1.jpg


Also tore into the the blend door motor and repair the broken solder joints in it.
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/23992600-74A1-4316-AA60-901F1F0A1218_zpstrshzca5.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/3BA1ECF6-A839-45EA-A430-A1B7FE40D2FC_zpsy89f1gbl.jpg


In preparation for Hurricane Irma i threw the GTS4 up on jack stand but then it missed us so took advantage of it and started to clean and under coat the chassis in preparation of winter for when they salt the roads here.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/16C857D9-B579-4D64-9FF6-1702C467CDBA_zpsfrnkddym.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/08F78896-E25E-4E75-93C9-F193889C8D2C_zpsbqxrv2vf.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/EA0A4047-5304-4A8A-8ED0-A1094CBFA5B6_zpsnonssmmt.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/78772B33-D8DC-42A0-994D-1DD227886071_zpsgni2ccrh.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/FDDBC301-1D80-4090-881A-6D2006370771_zpsztiultgs.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/724B870A-5FF2-4731-BB7F-0485AA342CDE_zpsm1ks27pq.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/9EDAC4B8-EDD4-4FA3-91FE-B755BABAC43E_zps8w31mztp.jpg

Then the daughter came out and wanted to give me a hand

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/2309A3DB-FCB1-4506-B6F9-05C32F5CA24C_zps8miyqvqw.jpg

[Sileighty_85]

tore apart the front end as well

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/1EC12591-6009-49A5-8173-10A42306C4EA_zpslrtwz05e.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/6F25A510-8F03-4CD1-AD39-EEE1EE007EEC_zpszqxqsl6e.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/B299751C-32E0-4611-A9C8-0F2A394C5B13_zpsqvg94mgk.jpg

Then jacked up the rear and did that one

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/B2BAA182-3838-4B63-A780-8625BB2B936F_zps9dxlxlub.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/73F8E909-6C1C-4CA3-AF51-2E6A666DCA65_zps9ckbjjql.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/C9B46FCE-EA69-4E32-BFCA-B9BE735D29F0_zpstq31aeuk.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/348DD03C-C9DF-41D4-8634-E2FB1378D094_zpsv74f181r.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/C947EF7D-CD4E-44FD-97BA-F2EB4B959803_zpsahmdz34l.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/3C5CC7A1-29B5-4998-A637-DB924289F7D7_zpslnyqjtqy.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/C877F2FA-FB18-4DBD-9809-F9D1E4EB5DB5_zpsahvpnysq.jpg

Then Finally able to take both the R32's out to a car meet with some friends

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/C32F3037-ADC6-4296-97E4-3B9B1836743D_zps6zoi0c3f.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/2EEFE3D7-B6CD-4A7D-A1BC-8C0EB2B16CAB_zpstyjyg5kf.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/6BBD3301-8776-4F1D-BCE5-461845317F34_zpsewpvinp4.jpg

Then mess around and started to clean up the Impul R5's

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/208E87F2-7337-4469-A603-A5A14FD12449_zpsdanh0xfn.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/7EAE97BA-5964-461D-AABE-88254BB12E65_zpsoinzh56l.jpg

Before
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/3DEC6A89-55A6-4A51-B37B-9C627E5CD344_zpseuslup1m.jpg

wire brushed
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/2FB566A8-062F-4210-B54A-A2766B506737_zpscmmyekvb.jpg

1,000 grit
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/3294C63E-3A18-47CE-B98B-A5518C007AA0_zpsjeb7yino.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/28A93E39-F744-444D-86EA-F881B3025A1F_zpseze3xtly.jpg

[feito]

I dont think your 400 bucks payment hasn't gone through haha

[DJTTon]

cxool photobucket logos broi

[Sileighty_85]

I dont think your 400 bucks payment hasn't gone through haha


cxool photobucket logos broi

You gotta use google chrome and download a patch for it to veiw

http://zilvia.net/f/showthread.php?t=649244

[Sileighty_85]

Photo back dating

Back in Dec whwn i picked up a Christmas tree.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/1B664976-CC63-4D15-8E91-AE4DA31E1D1C_zps0liqwcqc.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/1B664976-CC63-4D15-8E91-AE4DA31E1D1C_zps0liqwcqc.jpg.html)

The wife and i got to roll out together to a local car meet.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/759CD2C7-89D5-4E50-ACB5-39223E59AEEC_zpsmgzbvqx3.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/759CD2C7-89D5-4E50-ACB5-39223E59AEEC_zpsmgzbvqx3.jpg.html)

Got some snow up here so off came the body kit an on the snow tires for some snowy fun

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/6DB3E494-8751-4D68-BC48-9B0D31EECC72_zpspgzq4cic.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/6DB3E494-8751-4D68-BC48-9B0D31EECC72_zpspgzq4cic.jpg.html)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/026B3663-1ADB-44ED-88F4-BDCA44DC2BE2_zpsdiximof7.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/026B3663-1ADB-44ED-88F4-BDCA44DC2BE2_zpsdiximof7.jpg.html)

Finally got an alignment which then made a bad wheel bearing show its face, so took this an an opurtunity to rebuild the whole assy.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/431119FE-FC23-4754-BB61-EEF6EB8060A8_zpsdxhixmis.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/431119FE-FC23-4754-BB61-EEF6EB8060A8_zpsdxhixmis.jpg.html)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/3B4CA732-C124-480B-9561-DBD3E566AD61_zpsxdpyjvit.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/3B4CA732-C124-480B-9561-DBD3E566AD61_zpsxdpyjvit.jpg.html)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/873A5AE4-2BB1-410C-8E38-9E992BAED479_zps8zfsugdw.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/873A5AE4-2BB1-410C-8E38-9E992BAED479_zps8zfsugdw.jpg.html)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/D887509E-0885-44A6-B74B-ED19C3C8E41A_zpsp5x1idjd.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/D887509E-0885-44A6-B74B-ED19C3C8E41A_zpsp5x1idjd.jpg.html)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/719E7FB5-01DA-4C5D-B26C-79EFC97149D2_zps9jugg5h5.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/719E7FB5-01DA-4C5D-B26C-79EFC97149D2_zps9jugg5h5.jpg.html)

Got a screamer pipe from a buddy, im just about over it now haha

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/76DA508F-EF8A-46E5-8E77-83D55F5B4372_zpsplwysug0.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/76DA508F-EF8A-46E5-8E77-83D55F5B4372_zpsplwysug0.jpg.html)

And heres the reason you buy legit aero.
Front bumper Kicked up a softball sized rock on the interstate and the rear bumper caught it :/
http://i73.photobucket.com/albums/i235/Neil_85/HNR32/97A7D22B-E709-4ACA-A730-B38D85EDF8EB_zpsf3fys81x.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/97A7D22B-E709-4ACA-A730-B38D85EDF8EB_zpsf3fys81x.jpg.html)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/75F6FBD9-C1A2-4A28-B838-559F6C0DD12E_zpsxgtkz9kw.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/75F6FBD9-C1A2-4A28-B838-559F6C0DD12E_zpsxgtkz9kw.jpg.html)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/A173418D-9354-402F-9F4C-75649FE6947F_zpsha0ekox3.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/A173418D-9354-402F-9F4C-75649FE6947F_zpsha0ekox3.jpg.html)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/7166EBFC-CDF3-4FD2-9E17-3080A6D5734A_zpsohtrjhlp.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/7166EBFC-CDF3-4FD2-9E17-3080A6D5734A_zpsohtrjhlp.jpg.html)

Jacked it up to unfold it and it popped right back into shape! FTMFW

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/6251A0D2-9127-49C7-8F13-617D6A3593EB_zpslpgmeoeu.jpg (http://s73.photobucket.com/user/Neil_85/media/HNR32/6251A0D2-9127-49C7-8F13-617D6A3593EB_zpslpgmeoeu.jpg.html)

The rare instance the wife and i can roll together

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/209B483B-C05C-417C-B3E9-4A714F04A6BC_zpsfuotz1hd.png (http://s73.photobucket.com/user/Neil_85/media/HNR32/209B483B-C05C-417C-B3E9-4A714F04A6BC_zpsfuotz1hd.png.html)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/98B9420F-3882-4DE0-AA4D-E9EA41FF497F_zpshzofhmet.png (http://s73.photobucket.com/user/Neil_85/media/HNR32/98B9420F-3882-4DE0-AA4D-E9EA41FF497F_zpshzofhmet.png.html)

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/D4CE073A-FB23-4A17-9404-DD9B2FCCE6FF_zps7t00eblh.gif (http://s73.photobucket.com/user/Neil_85/media/HNR32/D4CE073A-FB23-4A17-9404-DD9B2FCCE6FF_zps7t00eblh.gif.html)

[KevinEdgar]

Did you only change one side hub? Personally I do mine as a pair that way I know they will generally wear out together.

That's awesome that you are able to go to meets rolling side by side with your wife.

Loving the build ~

[Sileighty_85]

Did you only change one side hub? Personally I do mine as a pair that way I know they will generally wear out together.

That's awesome that you are able to go to meets rolling side by side with your wife.

Loving the build ~

Kinda, they were both swapped out with a spare set.

Yeah man, need to get some more shots of them together.

Domo!

[Sileighty_85]

I'm Bringing it back!

At times I've kinda wanted a car with underglow lol
what better and than a Kitted Skyline haha

Period speciffic right? Lol mainly just for laughs

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/75546A6B-2730-49B3-9738-ABB08E0DD606_zpsgbix6dud.jpg

Over Engineered some brackets instead of just mounting them to the skirts so that when I scrape the skirts it wont knock off the strips. Not bad for a hammer and a vise lol

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/919E3CD7-579C-4AFF-B8D6-FB75A5880607_zpsnsukcpbp.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/4EB8C532-2054-44B8-8804-0FB6ADF2F252_zpsniq8fvf1.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/30FDDD73-076E-40D6-AEA0-48F83C2BA599_zpsb7tiver5.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/AFBC9DAF-9B48-4817-8D21-2CBE94C9E8E4_zpsou9ty4oo.jpg

Due to the length of the R32 i had to use 3 strips on the left side so I have to order 2 extra strips to be able tp properly light up the side skirts.

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/83B3B16D-45FC-4981-93BA-2B21A2DA51E7_zpslzyf0ldo.jpg

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/58913700-8169-4BCE-822F-32B96E90EA8C_zpsznkpjoni.jpg

[Dolph_KYAS13]

I'm Bringing it back!

http://i73.photobucket.com/albums/i235/Neil_85/HNR32/58913700-8169-4BCE-822F-32B96E90EA8C_zpsznkpjoni.jpg

https://farm2.staticflickr.com/1775/43331467474_d3bbcf6157_c.jpg

Welcome to NFS Underground!

[gostrider]

LOVE IT!!! looks cool

[Sileighty_85]

Whelp looks like photo bucket went full retard again.

But gonna drop these right here

Yeah theres no resizing these bitches

https://i.vgy.me/lMu290.jpg

https://i.vgy.me/wgTeQw.jpg

https://i.vgy.me/Vk6sG9.jpg