Skull And Bones KA Oil Adaptor question

[godrifttoday]

im installing my Skull And Bones KA Oil Adaptor , and i seem to have forgoten which is "in" or "out" on the adapter, i just want to know if its the left or right fitting where the oil exits to then go to remote oil filter then the oil cooler and then back into the motor

http://i35.photobucket.com/albums/d193/nis720/nis720/IMG_0705a.jpg

like this but this one is a sr
http://www.tomei-p.co.jp/_2003web-catalogue/image/pic/n2_oil_block_info.jpg

[slidewayz350]

I was nice enough to search for you. This is what I came up with on all the post and group buy threads.


the AN fitting on the side the 1/8 npt ports are is the return to the block
car takes pressure/temp readings from the "clean" oil returning to the block from the filter/cooler.


But Pm ManoNegra to be sure.


Thanks.

[slidewayz350]

When I get home I will read all of them and check to be sure but the answer I gave was pulled from the thread.

[godrifttoday]

I was nice enough to search for you. This is what I came up with on all the post and group buy threads.


the AN fitting on the side the 1/8 npt ports are is the return to the block
car takes pressure/temp readings from the "clean" oil returning to the block from the filter/cooler.


But Pm ManoNegra to be sure.


Thanks.

well that answeres it then, the right side port will be the one that would be label " in" ... Thanks!

[turbo2nr]

skullworks*

[forcaeotpk]

read all of them and check to be sure but the answer I gave was pulled from the thread.http://goo.gl/3ZWdho